Nokia 3210 V6.00 Contact Service Repair? - GSM-Forum

Kam Singh · 06-01-2001, 11:33

phone switches on with 'insert sim card' then switches off/on with 'contact message;.

i was advised to read flash using dejan which created file flash.out and then to repair this file using nokia repairer by guar.

i attempted to use this program and open file flash.out and got error message 'wrong file selected'

can someone advise where i am going wrong and how i should go about continuing to fix this phone.

cheers.

kam

eureka8888 · 06-01-2001, 15:56

backup your phone 200-2e0, download a good flash file then flash it up, be sure that the no of bytes of both files are the same

simbirley · 06-01-2001, 18:51

you can try renaming the flash.out as a .bin file.
it might accept it that way

batman · 06-01-2001, 19:30

rename file to 3210.fls

Kam Singh · 06-01-2001, 21:06

i have tried all this. guar program still says 'wrong file selected'

i also did a full flash as current could be corrupt. did not make any difference by doing this.

thank for trying to help. any more ideas anyone apart from 'scrap the phone'

cheers,

kam

eureka8888 · 06-04-2001, 16:06

you won't need repairer by guar!! just read the same address from a good phone and flash it to your phone remenber same version!

vid · 06-04-2001, 21:19

Hi,

Just read add 00200000 to 002f0000 from a good phone on same version and flash in to your phone.that will be ok.

If you don't have the 2nd phone,you can use the 'full backup'(free on net)to flash it,but must be same MCU version and PPM pack.
if you still have problem mail me,i'll try to help you.

Good Luck

Vid..

QUOTE]Originally posted by Kam Singh:
<STRONG>phone switches on with 'insert sim card' then switches off/on with 'contact message;.

i was advised to read flash using dejan which created file flash.out and then to repair this file using nokia repairer by guar.

i attempted to use this program and open file flash.out and got error message 'wrong file selected'

can someone advise where i am going wrong and how i should go about continuing to fix this phone.

cheers.

kam</STRONG>[/QUOTE]

LIKI · 06-04-2001, 21:41

hi,

solution vid is right.
you just need repair mcu or ppm file.

b.r.
LIKI999.

Quote:

Originally posted by vid:
<STRONG>Hi,

Just read add 00200000 to 002f0000 from a good phone on same version and flash in to your phone.that will be ok.

If you don't have the 2nd phone,you can use the 'full backup'(free on net)to flash it,but must be same MCU version and PPM pack.
if you still have problem mail me,i'll try to help you.

Good Luck

Vid..

QUOTE]Originally posted by Kam Singh:
[qb]phone switches on with 'insert sim card' then switches off/on with 'contact message;.

i was advised to read flash using dejan which created file flash.out and then to repair this file using nokia repairer by guar.

i attempted to use this program and open file flash.out and got error message 'wrong file selected'

can someone advise where i am going wrong and how i should go about continuing to fix this phone.

cheers.

kam</STRONG>

[/QB][/QUOTE]

06-01-2001, 11:33	#1 (permalink)
Kam Singh Junior Member Join Date: Mar 2001 Location: West Midlands, UK Posts: 18 Member: 3750 Status: Offline Thanks Meter: 0	Nokia 3210 V6.00 Contact Service Repair? phone switches on with 'insert sim card' then switches off/on with 'contact message;. i was advised to read flash using dejan which created file flash.out and then to repair this file using nokia repairer by guar. i attempted to use this program and open file flash.out and got error message 'wrong file selected' can someone advise where i am going wrong and how i should go about continuing to fix this phone. cheers. kam

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Nokia 3210 v5.26 Contact Service	SearchMeNot	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	08-24-2007 09:13
after jethro unlock 3210 6.00 contact service	alro	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-09-2001 06:25
Idiots guide to unlocking Nokia 3210 V6.00 NSE - 8/9 (03-10-00) req.	belker	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	03-23-2001 11:26
Nokia 3210 v6.00 and Nokia 5110 v5.30	Allen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	01-04-2001 03:53
New!! Nokia Flash Checksum And Contact Service Repair	HookerGsM	Main Sales Section	0	01-02-2001 10:12

06-01-2001, 15:56	#2 (permalink)
eureka8888 No Life Poster Join Date: May 2001 Posts: 569 Member: 4675 Status: Offline Thanks Meter: 7	backup your phone 200-2e0, download a good flash file then flash it up, be sure that the no of bytes of both files are the same

06-01-2001, 18:51	#3 (permalink)
simbirley Freak Poster Join Date: Apr 2001 Posts: 353 Member: 4398 Status: Offline Thanks Meter: 1	you can try renaming the flash.out as a .bin file. it might accept it that way

06-01-2001, 19:30	#4 (permalink)
batman Junior Member Join Date: May 2001 Posts: 9 Member: 4431 Status: Offline Thanks Meter: 0	rename file to 3210.fls

06-01-2001, 21:06	#5 (permalink)
Kam Singh Junior Member Join Date: Mar 2001 Location: West Midlands, UK Posts: 18 Member: 3750 Status: Offline Thanks Meter: 0	i have tried all this. guar program still says 'wrong file selected' i also did a full flash as current could be corrupt. did not make any difference by doing this. thank for trying to help. any more ideas anyone apart from 'scrap the phone' cheers, kam

06-04-2001, 16:06	#6 (permalink)
eureka8888 No Life Poster Join Date: May 2001 Posts: 569 Member: 4675 Status: Offline Thanks Meter: 7	you won't need repairer by guar!! just read the same address from a good phone and flash it to your phone remenber same version!

06-04-2001, 21:19	#7 (permalink)
vid No Life Poster Join Date: May 2000 Location: Malaysia and Singapore Age: 49 Posts: 741 Member: 1367 Status: Offline Sonork: 88476 Thanks Meter: 27	Hi, Just read add 00200000 to 002f0000 from a good phone on same version and flash in to your phone.that will be ok. If you don't have the 2nd phone,you can use the 'full backup'(free on net)to flash it,but must be same MCU version and PPM pack. if you still have problem mail me,i'll try to help you. Good Luck Vid.. QUOTE]Originally posted by Kam Singh: <STRONG>phone switches on with 'insert sim card' then switches off/on with 'contact message;. i was advised to read flash using dejan which created file flash.out and then to repair this file using nokia repairer by guar. i attempted to use this program and open file flash.out and got error message 'wrong file selected' can someone advise where i am going wrong and how i should go about continuing to fix this phone. cheers. kam</STRONG>[/QUOTE]