PIC 16F628
 

I am trying to build dejan box with PIC 16F628<br />I have hex from MTL<br />when I use 8 mhz crystal - bad box<br />4mhz - flashing work, but mbus commands don't work - calculation after flash, read log,...<br />I try also change oscillator XT to HS<br />Configuration bits I have set correctly like MTL write in readme.<br />I don't where is problem.

Can you help me ?

tnx

Pavel

[quote]Originally posted by pavel_novy:<br /><strong>I am trying to build dejan box with PIC 16F628<br />I have hex from MTL<br />when I use 8 mhz crystal - bad box<br />4mhz - flashing work, but mbus commands don't work - calculation after flash, read log,...<br />I try also change oscillator XT to HS<br />Configuration bits I have set correctly like MTL write in readme.<br />I don't where is problem.

Can you help me ?

hi <br />what programmer are you using ?

tnx

Pavel</strong><hr></blockquote>

I bought programmer for all eeprom + all pic with their own software from <a href="http://www.asix.cz," target="_blank">www.asix.cz,</a> it should work ok

can any one tell me if the pic 16f628 is also necessary to program data memory and if this is made like in pic 16ce625? many thnaks.good work for all!!!!!

i have same problem its pic16f628 busted. Trust me<br />i tested other pic now good working. <br />How i can busted to pic ? ( : ) lol i try get 25.5 volt to mclr )<br />yes its working only 4mhz pic you what time add up to mhz pic auto down because pic busted <img src="wink.gif" border="0">

Hi,<br />I have test the pic -04(4mhz) and 20ip(20mhz) all work well without any problem.I use 8 mhz crystal.<br />Thanks. <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

[ 21 February 2002: Message edited by: GsmSolution ]</p>