A SMALL GIFT FOR YOU

[yabyab]

8250 supported and all the latest versons like V5.29 for 8210?

<FONT COLOR="#ffff00" SIZE="1">[ 30 November 2001 13:08: Message edited by: Ablaze ]</font>

[Lead]

@Ablaze: 8210 5.29 is 100% supported, 8250 can be online made to be supported, if it is not already.

[Meam]

thanks Lead, i'll just try it with an old 3210 and will see what happenns, we will just have to wait till sunday.<br />I made a log with the logger from a 6150 ver 522, it's only 66 Byte, made another log from the same phone with logger from B-Phreak and the size is 189!! it can be normal i suppose but with the other loggers when you open the logfile, you always see the IMEI and MSId but not with this one, is this normal or am i doing something wrong?<br />has anybody made a logfile with Logger from Brad?<br />What's the size?<br />Regards<br />Meam

[Lead]

Normally, it is 66 bytes long.<br />There is no problem.

[penoso]

I flashed new mcu to the phone via dejan but when i turn it on it say contact service and no no network. Is this ok? I dont want to do the log thing for a dead mcu.<br />Im trying to update 8210 v5.26 to v5.28, is v5.29 available and where can i find it?

[Lead]

No, this is not ok.<br />You have probably made a mistake.<br />Do you have the full backup (200000-300000)?

<FONT COLOR="#ffff00" SIZE="1">[ 30 November 2001 15:01: Message edited by: Lead ]</font>

[penoso]

yes, no problem. When i restore my 5.26 backup the phone works again. I want to upgrade it but every time I upload the 5.28 mcu it says "contact service" and no "no network" so i think im going to stop testing and dont try to do the logger

[Lead]

Do you upgrade also the PPM?

[penoso]

no. Only mcu. Should i try with mcu+ppm? In this case i have mcu in a file and ppm in other. How should i do to join both files? I downloaded this files from <a href="http://www.gsmgroup.net/archive/Nk_files" target="_blank">www.gsmgroup.net/archive/Nk_files</a>

[Meam]

@penoso<br />you have to flash the PPm as well, i had this problem yesterday with a 6150, after flashing the mcu i had CS and when i flashed the ppm then the CS was gone but no network.<br />for 8210 you flash the mcu first and then start at the address 00340000 and flash PPM<br />Address for flashing 8210<br />MCU: 00200000-0033FFF0<br />PPM: 00340000-003CFFF0<br />Regards<br />Meam

[penoso]

Tested now flashing mcu at 200k and later ppm at 340k same error "contact service" I notice that the ppm wrote from 340000 till 3D0010 and no till 3D0000 as should be. Perhaps this is the reason. Anyway my heart cant support more "contact service" msg for a long time. Thx for ur help I will continue with v5.26 software

[Lead]

To be able to use the files from gsmgroup you have to remove the first 16-byte header from each PPM file. The files from <a href="http://brad.satelit.cz" target="_blank">http://brad.satelit.cz</a> are suitable for flashing by Dejan 1.00b.

The "NO NETWORK" problem is solved by the logger software.

[Pandemonio100]

Excuse my friends who can send me document whit all start and end address for MCU and PPM files?<br />Tanks<br />Pandemonio100 <img src="wink.gif" border="0">

[Toto]

...download here <a href="http://www.geocities.com/bph_co/ppm.zip" target="_blank">Bph&Co</a>

<br />BR

ToTo

[Brobble]

Penoso: I think, you hae faulty mcu file! I can offer you backup 8210-529 PPM E (0020-003D (mcu+ppm))! Mail me, if you want it!

Great idea with this logger! I will test it, too! But what will come to the future??? Member accounts for updating???

Greetings MR...