unlocking 6150 ... need help? - GSM-Forum

spark · 06-21-1999, 18:24

Hi iam new here!
sorry for my english.. i am german.
my 6150 is locked with lock 1 + lock 4. I have a m-bus cable.. winlock1.10 wintesla rakula and pclocals. I used winlock but i dont know how to open the locks without security box. Is there any way? also the counter for lock 1 is on 5..?? Please help me!

Ryu · 06-24-1999, 14:40

I need some help on unlocking my 51xx phone.

The counter for lock LEVEL1 on 5 means that you have entered #pw+(mastercode)+1# 5 times...

If you know how to unlock, please send an email to me! thanks!

Karson

manu40 · 06-25-1999, 16:03

Hi!
That work perfect with 51XX/61/XX
http://members.xoom.com/handyphon/winlock.zip
For more Link´s visits this side!
http://members.teleweb.at/manfred.schreiblehner/b10.htm

Ryu · 06-26-1999, 01:13

WinLock 1.10 can't open locks...
have you tried to open locks with it, manu40?

i tried that program, it doesn't work.

[This message has been edited by Ryu (edited 26 June 1999).]

manu40 · 06-26-1999, 08:12

ryu
this works!! dk2win16.dll and mti.dll into that Windows system copies,
starts again, open 1 and 4 codes doesn't alter, that is everything!!

DivAdonis · 06-28-1999, 15:17

HEi MANU.
Can u help me out with unlocking level one
I tried downloading winlock.zip - everything went fine but when i want to open WInopen it says deskey device driver not found. Vielleicht weil ich mit WIndows NT arbeite.
Kann niemand ganz simple den Mastercode fuer mich berechnen?

Danke
[email protected]

Ryu · 06-28-1999, 16:59

manu40, no... WinLock still can't open locks for me!

I guess I'm out of luck!

mobileinfo · 06-28-1999, 21:07

Hi guys nobody can open the locks with winlock!!!!!!

06-28-1999, 21:57

hi to all

every still the same!!!!

Folks, please play around with technical
progammes if you can't understand the diverent between "open" and " close"

if you have a free mobile, what are the settings from the locks?

are they open or close?

if you have a locked mobile the locks are OPEN!!!!!

so what do you whant to do? you will CLOSE the OPEN LOCK !!!!!!

for non technicals OPEN means ON
and CLOSE means OFF!!!!!

is it so hard to understand?
if you will run winlock you need the same dll's like wintesla need in the system route.

And you can't open Locks from free mobiles if you haven't the right equipment!!!

regards

06-28-1999, 22:00

the same dll' like wintesla need in the system route.

best regards

Ryu · 06-29-1999, 04:56

I know that my phone is locked on lock1 and lock2...

because I entered #pw+1234567890+Y#
where Y=1,2 ... it said "code error" ..
where Y=3,4 ... it said "SIM not resticted"

when I use Winlock 1.10 to read the phone, I saw lock1 and lock2 are closed and lock3 and lock4 are opened.

So.. conclusion... WinLock doesn't open any locks!!!

S-max · 06-30-1999, 16:58

try winopen!

password lock 1 fill in ????? (5x ?)
password lock 4 fil in ?????????? (10x ?)

max

S-max · 06-30-1999, 17:13

for more help

http://members.xoom.com/cnokia/FAQ/FAQ_unlock_n0kia.html

max

fondas · 07-04-1999, 12:05

hi to all
when i use winlock take error (5)
mti init failed

can you help me

e-mail me

Quasar · 07-09-1999, 13:46

Winlock does open lock 1 & 4 with out securiy box... close is more apropriate. It also changes lock 2 to one that you know...

06-21-1999, 18:24	#1 (permalink)
spark Junior Member Join Date: Jun 1999 Location: Austria Posts: 3 Member: 241 Status: Offline Thanks Meter: 0	unlocking 6150 ... need help? Hi iam new here! sorry for my english.. i am german. my 6150 is locked with lock 1 + lock 4. I have a m-bus cable.. winlock1.10 wintesla rakula and pclocals. I used winlock but i dont know how to open the locks without security box. Is there any way? also the counter for lock 1 is on 5..?? Please help me!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I need to unlock T28W need HELP !!!!	TIAGOSPEREIRA	Old Ericsson Phones & Sony Phones	0	11-18-2003 10:17
6150 need help!!!	pedjulino	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-24-2002 00:12
V60 unlock eror ,need help	billgate	Motorola P2k	0	04-14-2002 17:25
8210 5.11 unlock ? i need help!!!	nightxyz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-27-2000 03:01
How to unlock 912 need help...	vid	Infineon C16X M51 & ARM7 M52 BASED	0	07-26-2000 11:05

06-24-1999, 14:40	#2 (permalink)
Ryu Freak Poster Join Date: May 1999 Location: uk Posts: 419 Member: 131 Status: Offline Thanks Meter: 11	I need some help on unlocking my 51xx phone. The counter for lock LEVEL1 on 5 means that you have entered #pw+(mastercode)+1# 5 times... If you know how to unlock, please send an email to me! thanks! Karson

06-25-1999, 16:03	#3 (permalink)
manu40 Junior Member Join Date: Jun 1999 Location: wien Posts: 13 Member: 253 Status: Offline Thanks Meter: 0	Hi! That work perfect with 51XX/61/XX http://members.xoom.com/handyphon/winlock.zip For more Link´s visits this side! http://members.teleweb.at/manfred.schreiblehner/b10.htm

06-26-1999, 01:13	#4 (permalink)
Ryu Freak Poster Join Date: May 1999 Location: uk Posts: 419 Member: 131 Status: Offline Thanks Meter: 11	WinLock 1.10 can't open locks... have you tried to open locks with it, manu40? i tried that program, it doesn't work. [This message has been edited by Ryu (edited 26 June 1999).]

06-26-1999, 08:12	#5 (permalink)
manu40 Junior Member Join Date: Jun 1999 Location: wien Posts: 13 Member: 253 Status: Offline Thanks Meter: 0	ryu this works!! dk2win16.dll and mti.dll into that Windows system copies, starts again, open 1 and 4 codes doesn't alter, that is everything!!

06-28-1999, 15:17	#6 (permalink)
DivAdonis Junior Member Join Date: Jun 1999 Posts: 2 Member: 266 Status: Offline Thanks Meter: 0	HEi MANU. Can u help me out with unlocking level one I tried downloading winlock.zip - everything went fine but when i want to open WInopen it says deskey device driver not found. Vielleicht weil ich mit WIndows NT arbeite. Kann niemand ganz simple den Mastercode fuer mich berechnen? Danke [email protected]

06-28-1999, 16:59	#7 (permalink)
Ryu Freak Poster Join Date: May 1999 Location: uk Posts: 419 Member: 131 Status: Offline Thanks Meter: 11	manu40, no... WinLock still can't open locks for me! I guess I'm out of luck!

06-28-1999, 21:07	#8 (permalink)
mobileinfo Banned Join Date: May 1999 Location: UK Posts: 1,051 Member: 84 Status: Offline Sonork: 100.1616161 Thanks Meter: 2,617	Hi guys nobody can open the locks with winlock!!!!!!

06-28-1999, 21:57	#9 (permalink)
Jefferson Guest Posts: n/a Member:	hi to all every still the same!!!! Folks, please play around with technical progammes if you can't understand the diverent between "open" and " close" if you have a free mobile, what are the settings from the locks? are they open or close? if you have a locked mobile the locks are OPEN!!!!! so what do you whant to do? you will CLOSE the OPEN LOCK !!!!!! for non technicals OPEN means ON and CLOSE means OFF!!!!! is it so hard to understand? if you will run winlock you need the same dll's like wintesla need in the system route. And you can't open Locks from free mobiles if you haven't the right equipment!!! regards

06-28-1999, 22:00	#10 (permalink)
Jefferson Guest Posts: n/a Member:	the same dll' like wintesla need in the system route. best regards

06-29-1999, 04:56	#11 (permalink)
Ryu Freak Poster Join Date: May 1999 Location: uk Posts: 419 Member: 131 Status: Offline Thanks Meter: 11	I know that my phone is locked on lock1 and lock2... because I entered #pw+1234567890+Y# where Y=1,2 ... it said "code error" .. where Y=3,4 ... it said "SIM not resticted" when I use Winlock 1.10 to read the phone, I saw lock1 and lock2 are closed and lock3 and lock4 are opened. So.. conclusion... WinLock doesn't open any locks!!!

06-30-1999, 16:58	#12 (permalink)
S-max Crazy Poster Join Date: Jun 1999 Location: holland Posts: 58 Member: 267 Status: Offline Thanks Meter: 0	try winopen! password lock 1 fill in ????? (5x ?) password lock 4 fil in ?????????? (10x ?) max

06-30-1999, 17:13	#13 (permalink)
S-max Crazy Poster Join Date: Jun 1999 Location: holland Posts: 58 Member: 267 Status: Offline Thanks Meter: 0	for more help http://members.xoom.com/cnokia/FAQ/FAQ_unlock_n0kia.html max

07-04-1999, 12:05	#14 (permalink)
fondas Junior Member Join Date: Jul 1999 Location: Hellas Posts: 11 Member: 279 Status: Offline Thanks Meter: 2	hi to all when i use winlock take error (5) mti init failed can you help me e-mail me

07-09-1999, 13:46	#15 (permalink)
Quasar Junior Member Join Date: Jul 1999 Posts: 3 Member: 306 Status: Offline Thanks Meter: 0	Winlock does open lock 1 & 4 with out securiy box... close is more apropriate. It also changes lock 2 to one that you know...