Very annoying 8210 problem!!!
 

I've flashed MCU+PPM+EEPROM into the phone, and got CS. The phone was fine before flashing. None of my MBUS-programs can get in contact with the phone. But after a little search on the board, I found out that this was a well known problem, and could be fixed with nk_calc.

But I have never before managed to get nk_calc to work on neither my laptop or my desktop....but after 2 hours of reading and testing I succeded in running the program in pure dos, with the use of DexDebug.

The program is running perfect with all other phones, execpt the 8210. I just receive "Bad connection" all the time, I've tried with 2 other connectors, and 2 MBUS cables....

I've tried with MCU+PPM v5.25-v5.31, and with 4 virgin eeproms (downloaded from different places), but nothing seems to work. And yes, I AM using the correct addresses. However, I was not able to find any full flashes (200-400) on the net, even though I've been going through all links on Schwantz site. So if anyone has a FULL BACKUP (in one file), then I'll be very thankfull....(a or b PPM package is prefered, but I can use other packages also)

I've been using Rolis v4.77 & v.4.78b5 for flashing.

Any sugestions?

Best Regards
--
Kenni
[email protected]

I fixed it, thnx to kovbal, who send me a full backup :D

However, if anyone have a full backup with a or b PPM package, please contact me! - I need a PPM with danish T9 :)

Best Regards
--
Kenni