cant flash 7650 using UFS !!!! - GSM-Forum

UnlockingExperts · 10-30-2004, 07:40

Hi mates, trying to flash 7650 using UFS and every time i am getting this error message please help !!!!!!

1st Boot Ok, WD2, UPP: 0082
Fl0: 0x00000000-0x00FFFFFF,00898876,Int 28F128W18-T
Fl1: 0x02000000-0x023FFFFF,000122D1,Amd 29BDS323D
Algorithm: w2_int_b.fia
Algorithm Ok, MSID: 84E6CAAD1B747884F1F98DA463
Decoded MSID: 3E4EBAF7-00002A0C-A8000000
Encoded FAID: 6AC0D486-0C40D3F0-CA45DC2F
Area: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area: 0x00010000-0x00EF9FFF Erased, Time: 02:18
Area: 0x00FF0000-0x00FFC000 Erased, Time: 00:01
BT MCM (26) Image Found & Skipped: 1211
BT MCM (26) Image Found: 22, 0x0002BAC0
BT MCM Flashing Done, Time: 00:12
BT MCM Registering Done
MCU Flashing Completed, Time: 05:18
Erasing: 0x00000000-0x0000FFFF ...
Erasing Error: 10, at: 0x00000000-0x0000FFFF, 9407AA
Process Failed, Repowering Mobile

DMD · 10-30-2004, 09:10

Your getting an error when trying to flash ppm

try select only ppm then flash again
your phone is getting flashed to the bluetooth module ok and mcu but failing on ppm
I have had a couple of nokia's doing that I normally just try again selecting only ppm

WBR D.

UnlockingExperts · 10-30-2004, 10:10

Thankx Mate, will post the results !!!

UnlockingExperts · 10-30-2004, 10:24

just tried it with selecting only ppm file and flash but again same BAD RESPONSE FAIL TO POWER UP !!!

Fre3 Crack3r · 10-30-2004, 13:44

Hi

Me too i was get this error before . . i slove it by installing last new FIA file . .

And @LL oK

Regards . .

10-30-2004, 07:40	#1 (permalink)
UnlockingExperts No Life Poster Join Date: Mar 2004 Location: UAE / UK / PAK / HK Posts: 712 Member: 59731 Status: Offline Sonork: 100.99999 Thanks Meter: 514	cant flash 7650 using UFS !!!! Hi mates, trying to flash 7650 using UFS and every time i am getting this error message please help !!!!!! 1st Boot Ok, WD2, UPP: 0082 Fl0: 0x00000000-0x00FFFFFF,00898876,Int 28F128W18-T Fl1: 0x02000000-0x023FFFFF,000122D1,Amd 29BDS323D Algorithm: w2_int_b.fia Algorithm Ok, MSID: 84E6CAAD1B747884F1F98DA463 Decoded MSID: 3E4EBAF7-00002A0C-A8000000 Encoded FAID: 6AC0D486-0C40D3F0-CA45DC2F Area: 0x00000000-0x0000FFFF Erased, Time: 00:00 Area: 0x00010000-0x00EF9FFF Erased, Time: 02:18 Area: 0x00FF0000-0x00FFC000 Erased, Time: 00:01 BT MCM (26) Image Found & Skipped: 1211 BT MCM (26) Image Found: 22, 0x0002BAC0 BT MCM Flashing Done, Time: 00:12 BT MCM Registering Done MCU Flashing Completed, Time: 05:18 Erasing: 0x00000000-0x0000FFFF ... Erasing Error: 10, at: 0x00000000-0x0000FFFF, 9407AA Process Failed, Repowering Mobile

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to flash 5300 using UFS	avroy7	UFS2 + UFS3-Tornadoflasher	6	02-14-2007 19:49
Fail when flash T100 using UFS	komsell	VLSI, Conexant, Skyworks and Old Models	2	10-25-2005 08:17
Can I flash X140 using UFS?	Invader	UFS2 + UFS3-Tornadoflasher	4	09-09-2005 13:37
how to flash 7650 using twister? help...	etgo	Twisterflasher	6	04-07-2005 13:25
cant flash 6610 using ufs	jab	UFS2 + UFS3-Tornadoflasher	1	10-15-2004 16:02

10-30-2004, 09:10	#2 (permalink)
DMD No Life Poster Join Date: Jun 2002 Location: CTSA Age: 46 Posts: 2,194 Member: 12660 Status: Offline Thanks Meter: 7	Your getting an error when trying to flash ppm try select only ppm then flash again your phone is getting flashed to the bluetooth module ok and mcu but failing on ppm I have had a couple of nokia's doing that I normally just try again selecting only ppm WBR D.

10-30-2004, 10:10	#3 (permalink)
UnlockingExperts No Life Poster Join Date: Mar 2004 Location: UAE / UK / PAK / HK Posts: 712 Member: 59731 Status: Offline Sonork: 100.99999 Thanks Meter: 514	Thankx Mate, will post the results !!!

10-30-2004, 10:24	#4 (permalink)
UnlockingExperts No Life Poster Join Date: Mar 2004 Location: UAE / UK / PAK / HK Posts: 712 Member: 59731 Status: Offline Sonork: 100.99999 Thanks Meter: 514	just tried it with selecting only ppm file and flash but again same BAD RESPONSE FAIL TO POWER UP !!!

10-30-2004, 13:44	#5 (permalink)
Fre3 Crack3r Banned Join Date: Jan 2002 Location: Morocco , Tetouan Posts: 1,752 Member: 8784 Status: Offline Sonork: 100.63512 Thanks Meter: 31	Hi Me too i was get this error before . . i slove it by installing last new FIA file . . And @LL oK Regards . .