with fps-8 i've killed my uem after rebuiled flash - GSM-Forum

alhamde16 · 02-05-2005, 15:04

i have 2300 with software version 5.62 after i erase flash with rh 18 bin
and make rebuiled flash i had "sim lock prog failed" a sim locked status FFFF
i downgrade to 5.60 and rebuiled the flash then i had simlock area open
but the phone shut down by it self after 30 min
what's happend to uem "corrupted security area ?"
i don't want to change uem cause its glued and i don't think it's hardware problem
is there anybody could explain what's happend?

thanks for advice

LYRE · 02-05-2005, 19:32

erase the phone again upgrade software , rebuiled and unlock
B.R

VsH-GsM · 02-05-2005, 19:38

Rebuild Flash IMEI Data.
Upload RPL...

alhamde16 · 02-06-2005, 08:18

@ lyre i tried to do that-rewind phone to the first status-but it failed
still shut down after 30 sec and software ver 5.62and simlock area are open
@ VsH-GsM i've did that ofcurse just reb flash but the same prob
after that i've tried to rebuiled both flash+uem but the fault still ...

i think uem data corrupted

B.R

VsH-GsM · 02-06-2005, 09:29

Your UEM is 100% ok.
Problem is in 1100,2300 and 2600 phones which when you read ask files from them, they return wrong data (c) andrei.
There is solution for it, i can help you, and can make correct RPL JUST by your IMEI,
but of course not free

VsH-GsM · 02-06-2005, 09:39

Ok lets help you.

Give me your imei

alhamde16 · 02-06-2005, 13:29

35254200453827
prod 0513367
then u say i made wrong ask

VsH-GsM · 02-06-2005, 18:04

Use GT server to calc this ask file
then write RPL to your phone by UFS or TWISTER

VsH-GsM · 02-06-2005, 18:06

[SER_PROG_DATA_IN]
IMEI=35254200453827
PRODUCTCODE=0513367
DONGLE= Put a valid Griffin SN here
CHANGED=UEM
DATA=0002BB4D84345F6BD1D0645126E89B9C1DB34090E0A3A D5E431D205CA047B089A050450BED026E1A88D785127CFF47E AFFB5F387C0EA17D61F94FF69125A17A0AD420A543D89F8372 55C
DATE=2004-01-07 20:32:34
CHECKSUM=0

[SIM_PROG_DATA_IN]
TYPE=2
IMEI=352542004538270
PRODUCTCODE=0513367
DONGLE= Put a valid Griffin SN here
CHECKSUM=0

LYRE · 02-06-2005, 21:26

great support from u vahid
@alhamde16 just write this rpl file and let's see the result,
@ vahid do u mean griffin server solve the problem and fps-8 didn't
or the fault from reading the file by alhamde16
let us get the fault point plz

B.R

VsH-GsM · 02-07-2005, 15:19

Problem is in 1100,2300,2600 phones.
they return wrong data sometimes when you read ASK file.

alhamde16 · 02-07-2005, 15:35

thanks vsh-gsm for co-operation
i'll write the file on tornado and feed back the result

B.R

ZetMen · 02-08-2005, 15:54

i have the same problem but in my 2600 is problem with flash because i write the flash and stop erasing at 46% i rehot flash and write all flash phone wake up but now have bad imei "??????" i try today write one more time flash and the same problem 46% and stop.What i shall to do, change flash ? or only rehot and what latter im not good with repair ???????? pls help me
Best Regards

02-05-2005, 15:04	#1 (permalink)
alhamde16 Freak Poster Join Date: May 2004 Age: 48 Posts: 177 Member: 65863 Status: Offline Thanks Meter: 15	with fps-8 i've killed my uem after rebuiled flash i have 2300 with software version 5.62 after i erase flash with rh 18 bin and make rebuiled flash i had "sim lock prog failed" a sim locked status FFFF i downgrade to 5.60 and rebuiled the flash then i had simlock area open but the phone shut down by it self after 30 min what's happend to uem "corrupted security area ?" i don't want to change uem cause its glued and i don't think it's hardware problem is there anybody could explain what's happend? thanks for advice

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
ust pro kill my e900 after flash	patric	UST Pro II	4	05-28-2008 13:44
Flashing error with FPS-8	besthacker	Nokia Digital Core Technology 4 ( DCT-4 )	18	03-25-2005 19:12
6630 repair with fps-8 after wrong flash	John_Doe	Nokia Base Band 5 ( BB-5 )	2	12-15-2004 16:49
Help,I've killed my GA628 !	robb.79	Old Ericsson Phones & Sony Phones	4	07-24-2001 11:11

02-05-2005, 19:32	#2 (permalink)
LYRE Freak Poster Join Date: Apr 2002 Location: Zgr Age: 48 Posts: 221 Member: 11112 Status: Offline Thanks Meter: 11	erase the phone again upgrade software , rebuiled and unlock B.R

02-05-2005, 19:38	#3 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	Rebuild Flash IMEI Data. Upload RPL...

02-06-2005, 08:18	#4 (permalink)
alhamde16 Freak Poster Join Date: May 2004 Age: 48 Posts: 177 Member: 65863 Status: Offline Thanks Meter: 15	@ lyre i tried to do that-rewind phone to the first status-but it failed still shut down after 30 sec and software ver 5.62and simlock area are open @ VsH-GsM i've did that ofcurse just reb flash but the same prob after that i've tried to rebuiled both flash+uem but the fault still ... i think uem data corrupted B.R

02-06-2005, 09:29	#5 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	Your UEM is 100% ok. Problem is in 1100,2300 and 2600 phones which when you read ask files from them, they return wrong data (c) andrei. There is solution for it, i can help you, and can make correct RPL JUST by your IMEI, but of course not free

02-06-2005, 09:39	#6 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	Ok lets help you. Give me your imei

02-06-2005, 13:29	#7 (permalink)
alhamde16 Freak Poster Join Date: May 2004 Age: 48 Posts: 177 Member: 65863 Status: Offline Thanks Meter: 15	35254200453827 prod 0513367 then u say i made wrong ask

02-06-2005, 18:04	#8 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	Use GT server to calc this ask file then write RPL to your phone by UFS or TWISTER

02-06-2005, 18:06	#9 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	[SER_PROG_DATA_IN] IMEI=35254200453827 PRODUCTCODE=0513367 DONGLE= Put a valid Griffin SN here CHANGED=UEM DATA=0002BB4D84345F6BD1D0645126E89B9C1DB34090E0A3A D5E431D205CA047B089A050450BED026E1A88D785127CFF47E AFFB5F387C0EA17D61F94FF69125A17A0AD420A543D89F8372 55C DATE=2004-01-07 20:32:34 CHECKSUM=0 [SIM_PROG_DATA_IN] TYPE=2 IMEI=352542004538270 PRODUCTCODE=0513367 DONGLE= Put a valid Griffin SN here CHECKSUM=0

02-06-2005, 21:26	#10 (permalink)
LYRE Freak Poster Join Date: Apr 2002 Location: Zgr Age: 48 Posts: 221 Member: 11112 Status: Offline Thanks Meter: 11	great support from u vahid @alhamde16 just write this rpl file and let's see the result, @ vahid do u mean griffin server solve the problem and fps-8 didn't or the fault from reading the file by alhamde16 let us get the fault point plz B.R

02-07-2005, 15:19	#11 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	Problem is in 1100,2300,2600 phones. they return wrong data sometimes when you read ASK file.

02-07-2005, 15:35	#12 (permalink)
alhamde16 Freak Poster Join Date: May 2004 Age: 48 Posts: 177 Member: 65863 Status: Offline Thanks Meter: 15	thanks vsh-gsm for co-operation i'll write the file on tornado and feed back the result B.R

02-08-2005, 15:54	#13 (permalink)
ZetMen Freak Poster Join Date: Sep 2002 Location: Cyprus Age: 42 Posts: 429 Member: 15149 Status: Offline Thanks Meter: 61	i have the same problem but in my 2600 is problem with flash because i write the flash and stop erasing at 46% i rehot flash and write all flash phone wake up but now have bad imei "??????" i try today write one more time flash and the same problem 46% and stop.What i shall to do, change flash ? or only rehot and what latter im not good with repair ???????? pls help me Best Regards