Pimp my phone :) 6310 with 100% colour lcd ! - Page 3 - GSM-Forum

gom3z · 12-02-2006, 20:42

Quote:

Originally Posted by GsmProf

I will ask again, does this type of flash ic work also?

YES ! You can use this type of flash ic.

so.. who made 63 with colour except me ?

Reich · 12-02-2006, 21:04

and IRDA will be OK? From wich one phone i will must write flash to have IRDA?

emwugsm · 12-02-2006, 22:52

I'm impressed. I've saw it today on allegro.pl and wondered what was changed. I thougt that you also have to change UPP.

But there's one thing. Does the Bluetooth work after this modification ? And more, could you then connet it do PC using for example DLR3 ?

Best Regards
eMWu^GSM

seba123 · 12-02-2006, 23:10

What with polyphonic melody?? Why??

pfeilmayer · 12-02-2006, 23:20

Quote:

Originally Posted by gom3z

Hello forum members,

As i wrote - it's 6310 with 100% colour lcd.
Not colorized like cheap sagem phones, lcd comes from 3510i.

Are you interested how to do it?
Firstly find working 6310, NOT 6310i (you have to use 6310 because it's dual band like 8910i which is based on hagar).
Backup imei area in flash (use jaf or karwos suite or..)
Change flash ic into K5U64418TM.
Flash mcu, ppm and cnt using 8910i flashes.
Write .rpl, pm from 8910i, full defaults+unlock.
Change lcd into 3510i (use glass only, frame from 6310i).

After this you have working phone. Maybe you will need to increase backlight( chang leds etc).

I think about putting white led driver, then it should looks better.
Also there is a project with polyphonic melody.
If you are interested in this project then let me know, maybe we can made polyphonic together.

regards,

gom3z.

Hello
Congratulations for your work !!!!! KEEP IT UP !!!!!
Please tell us if there are problems after changes, with :
- signal strength
- significant battery power loss
- bluetooth problems
- IrDA problems
- other things that might have changed ...

Thank you !

Keep up the brilliant work !

P.S. : Please can you upload or send me PM and RPL for 8910i ?!

Thank you

karwos · 12-03-2006, 01:25

Good work holden !!

REGARDS !

Pozdrav

tomekkkk · 12-03-2006, 12:46

Great Work, gom3z.

Quote:

Originally Posted by pfeilmayer

P.S. : Please can you upload or send me PM and RPL for 8910i ?!

Thank you

Yes, for me too, please.

Thanks

makroud · 12-03-2006, 21:58

Anybody can explain me how to :

- Backup imei area in flash with jaf or ufs
- Write .rpl with jaf or ufs

gom3z · 12-04-2006, 20:07

Quote:

Originally Posted by pfeilmayer

Hello
Congratulations for your work !!!!! KEEP IT UP !!!!!
Please tell us if there are problems after changes, with :
- signal strength
- significant battery power loss
- bluetooth problems
- IrDA problems
- other things that might have changed ...

P.S. : Please can you upload or send me PM and RPL for 8910i ?!

Thank you

BT is working properly, i didn't test irda but should work.
Many people ask me about rpl, what do you want to do with "my" rpl ?
You have to backup your imei area and after all write your rpl ! if you will write "any" rpl then your imei in flash and uem will be different = imei will be "?????????" . I can't write it more clearly.

About pm: just use search, don't be so lazy ! There's a lot of posts with it.

wntl · 12-05-2006, 13:13

great solution

u are the best

welcome to www.forum.pasjagsm.pl

matezgsm · 12-08-2006, 23:47

i`ve got a problem with this conversion. after flashing with 8910i software (mcu, ppm, cnt) i can`t write pm file. lcd shows "local mode" but ufs shows error "pm write failed"
i used K5U64418TA flash ic

pfeilmayer · 12-08-2006, 23:53

Quote:

Originally Posted by matezgsm

i`ve got a problem with this conversion. after flashing with 8910i software (mcu, ppm, cnt) i can`t write pm file. lcd shows "local mode" but ufs shows error "pm write failed"
i used K5U64418TA flash ic

hello

I have a problem 2 ....
I used xxxxxxTM flash ic ... actually I tryed with 2 pcs ... but the problem persisted. I cannot write at all the flash. it gives me somekind of error.
why !?!

matezgsm · 12-09-2006, 11:22

skip bt flashing. i have this problem too..

pfeilmayer · 12-09-2006, 11:26

Quote:

Originally Posted by matezgsm

skip bt flashing. i have this problem too..

allready tried that ...
I allso tried to write manually first MCU than PPM than CNT. same error, at the same xxxxxxxxxxx zone .... flash ic I believe that it was soldered ok ... I even tried with 2 different ic's from the same model ....
I WANT TO HAVE 6310 with colour LCD !!!!!

((((((

matezgsm · 12-09-2006, 11:46

try with xxxTA flash ic..

12-03-2006, 21:58	#38 (permalink)
makroud Freak Poster Join Date: Nov 2005 Location: Ardahan Posof çilvana Posts: 421 Member: 198839 Status: Offline Thanks Meter: 28	Question Anybody can explain me how to : - Backup imei area in flash with jaf or ufs - Write .rpl with jaf or ufs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Davinci Team Introducing Pimp Client 2.0 - Pimp your phone for free!	sheik9905677786	Sony Ericsson	0	09-25-2009 20:32
Nokia 1110 with colour LCD	gsm-master	Nokia Digital Core Technology 4 ( DCT-4 )	1	12-31-2006 15:02
Project Pimp my Phone	SmaRkieS	GSM Mobile Links	2	07-10-2005 03:47
Pimp My Phone !!!	dannyogolo	Nokia Multimedia	6	11-06-2004 20:17
I lost my phone-book in my 6310....	gsm_badajoz	Nokia Digital Core Technology 4 ( DCT-4 )	5	05-29-2002 23:35

12-02-2006, 21:04	#32 (permalink)
Reich Junior Member Join Date: Sep 2006 Location: POLAND Posts: 4 Member: 359440 Status: Offline Thanks Meter: 0	and IRDA will be OK? From wich one phone i will must write flash to have IRDA?

12-02-2006, 22:52	#33 (permalink)
emwugsm Freak Poster Join Date: Oct 2004 Location: Poland - Lubin (DLU) Age: 36 Posts: 243 Member: 88545 Status: Offline Thanks Meter: 7	I'm impressed. I've saw it today on allegro.pl and wondered what was changed. I thougt that you also have to change UPP. But there's one thing. Does the Bluetooth work after this modification ? And more, could you then connet it do PC using for example DLR3 ? Best Regards eMWu^GSM

12-02-2006, 23:10	#34 (permalink)
seba123 Junior Member Join Date: Dec 2006 Posts: 5 Member: 403139 Status: Offline Thanks Meter: 1	What with polyphonic melody?? Why??

12-03-2006, 01:25	#36 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	Good work holden !! REGARDS ! Pozdrav

12-05-2006, 13:13	#40 (permalink)
wntl Freak Poster Join Date: Jul 2005 Location: Poland, Bytom Age: 37 Posts: 177 Member: 161847 Status: Offline Thanks Meter: 47	great solution u are the best welcome to www.forum.pasjagsm.pl

12-08-2006, 23:47	#41 (permalink)
matezgsm Junior Member Join Date: Aug 2005 Age: 35 Posts: 29 Member: 174920 Status: Offline Thanks Meter: 0	i`ve got a problem with this conversion. after flashing with 8910i software (mcu, ppm, cnt) i can`t write pm file. lcd shows "local mode" but ufs shows error "pm write failed" i used K5U64418TA flash ic

12-09-2006, 11:22	#43 (permalink)
matezgsm Junior Member Join Date: Aug 2005 Age: 35 Posts: 29 Member: 174920 Status: Offline Thanks Meter: 0	skip bt flashing. i have this problem too..

12-09-2006, 11:46	#45 (permalink)
matezgsm Junior Member Join Date: Aug 2005 Age: 35 Posts: 29 Member: 174920 Status: Offline Thanks Meter: 0	try with xxxTA flash ic..