2100 contact service - GSM-Forum

fone · 01-11-2004, 12:54

I found problem 2100 contact service and /i use nok tool 1.8 read IEMI ,it has not IEMI. why and how to trouble it .I ever change IC flash .It is ok but I think that may be way to solution
better this by flashing.
thank for advisor
( Fone)
regard

fonec · 01-11-2004, 13:39

man
that software problem
repair u iemi using knok

fone · 01-11-2004, 14:30

Quote:

Originally posted by fone
I found problem 2100 contact service and /i use nok tool 1.8 read IEMI ,it has not IEMI. why and how to trouble it .I ever change IC flash .It is ok but I think that may be way to solution
better this by flashing.
thank for advisor
( Fone)

regard

I have flash with knok but problem still.

LogoMan · 01-12-2004, 02:11

@ fone
As we noticed new versions of N2100, if you change IMEI using any EEPROM Tool, IMEI will not be changed, I think Nokia made the Combo Flash Chip OTP

If IMEI was corrupted, replaced combo flash

your problem will be solved tested many times

BR,
LogoMan

fone · 01-12-2004, 15:39

Quote:

Originally posted by LogoMan
@ fone
As we noticed new versions of N2100, if you change IMEI using any EEPROM Tool, IMEI will not be changed, I think Nokia made the Combo Flash Chip OTP

If IMEI was corrupted, replaced combo flash your problem will be solved tested many times

BR,
LogoMan

DCT3 for 2100 are OTP ?
I checlk with wintesla(crack) fail warranty. no IEMI for tool 1.8

micka22 · 01-12-2004, 16:16

Look at the old posts,
your 2100 has the new sharp flash...
You need to copy a full flash from a good working one, then to writte it down inside the 2100 using knok.
Use a version 5.41 or the latest 5.49,,,
I think, you can find a link for downloading a good flash file on the old posts; if u are using griffin, choose the ppm pack b for french.

I can't send you my flash file because the internet connection is too slow in m country...

BR

mandu · 01-12-2004, 20:34

step (1), flash mcu,ppm & eeprom ( useing knok ) area after step (2) rebuild imei ( useing rolis tool ) .. if same problem change cobba then do step (2) ....

jo_jogja · 01-13-2004, 10:41

can you give me knok for 2100? or he is same with knok95? what type phone choose?

micka22 · 01-13-2004, 16:09

00B000EA: Sharp LRS13A11, ALIAS_ID=00898890 ,size 16Mb

add to config,,dev_list for supporting new sharp flash ic
BR

ejvital · 01-13-2004, 17:47

yeah change ur combo memory

01-11-2004, 12:54	#1 (permalink)
fone Freak Poster Join Date: Nov 2002 Location: MX-KEY is the BEST NOKIA TOOL Age: 49 Posts: 366 Member: 17367 Status: Offline Thanks Meter: 16	2100 contact service I found problem 2100 contact service and /i use nok tool 1.8 read IEMI ,it has not IEMI. why and how to trouble it .I ever change IC flash .It is ok but I think that may be way to solution better this by flashing. thank for advisor ( Fone) regard

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2100 contact service	Byte	Nokia Hardware & Hardware Repair	45	12-17-2004 18:41
2100 Contact Service	kiss89	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	10-03-2004 08:12
2100 contact service with griffin	djyash	Griffin	39	01-28-2004 12:09
Nokia 2100 Contact service	thunoy	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	09-10-2003 09:46
2100 contact service new flash chip[sharp]	drnele	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	14	08-05-2003 19:10

01-11-2004, 13:39	#2 (permalink)
fonec No Life Poster Join Date: Apr 2002 Location: egypt Age: 54 Posts: 5,072 Member: 11101 Status: Offline Sonork: 100.1641000 Thanks Meter: 1,783	man that software problem repair u iemi using knok

01-12-2004, 02:11	#4 (permalink)
LogoMan No Life Poster Join Date: Nov 2002 Location: La Paz Age: 53 Posts: 970 Member: 17431 Status: Offline Thanks Meter: 22	@ fone As we noticed new versions of N2100, if you change IMEI using any EEPROM Tool, IMEI will not be changed, I think Nokia made the Combo Flash Chip OTP If IMEI was corrupted, replaced combo flash your problem will be solved tested many times BR, LogoMan

01-12-2004, 16:16	#6 (permalink)
micka22 Freak Poster Join Date: May 2003 Location: MADAGASCAR Age: 42 Posts: 280 Member: 28378 Status: Offline Thanks Meter: 3	Look at the old posts, your 2100 has the new sharp flash... You need to copy a full flash from a good working one, then to writte it down inside the 2100 using knok. Use a version 5.41 or the latest 5.49,,, I think, you can find a link for downloading a good flash file on the old posts; if u are using griffin, choose the ppm pack b for french. I can't send you my flash file because the internet connection is too slow in m country... BR

01-12-2004, 20:34	#7 (permalink)
mandu Freak Poster Join Date: Oct 2002 Location: INDIA Posts: 292 Member: 17243 Status: Offline Thanks Meter: 13	step (1), flash mcu,ppm & eeprom ( useing knok ) area after step (2) rebuild imei ( useing rolis tool ) .. if same problem change cobba then do step (2) ....

01-13-2004, 10:41	#8 (permalink)
jo_jogja Insane Poster Join Date: Jan 2004 Location: indonesia Age: 45 Posts: 67 Member: 48360 Status: Offline Thanks Meter: 1	can you give me knok for 2100? or he is same with knok95? what type phone choose?

01-13-2004, 16:09	#9 (permalink)
micka22 Freak Poster Join Date: May 2003 Location: MADAGASCAR Age: 42 Posts: 280 Member: 28378 Status: Offline Thanks Meter: 3	00B000EA: Sharp LRS13A11, ALIAS_ID=00898890 ,size 16Mb add to config,,dev_list for supporting new sharp flash ic BR

01-13-2004, 17:47	#10 (permalink)
ejvital Junior Member Join Date: Jan 2004 Age: 47 Posts: 39 Member: 48489 Status: Offline Thanks Meter: 2	yeah change ur combo memory