2300 display problem - GSM-Forum

chhoton · 12-28-2008, 07:00

one 2300 is blinking very dimly with white dim light. I have tried with different versions of firmware but to no result. Then i have heated the pcb and the set was running fine. But as soon as it got cold ( or normal temperature) the set at first started to blink brightly with all displayed menu, then it gradually went dimmer and then there is only a dim white light blinking and the phone is not working from now on.
i have repeated the heating --- it went on – all displayed – got cold – light dim – no operation.

any idea anybody?????
with thanks in advance
wish u all a very happy new year

gaathey · 12-28-2008, 07:31

Quote:

Originally Posted by chhoton

one 2300 is blinking very dimly with white dim light. I have tried with different versions of firmware but to no result. Then i have heated the pcb and the set was running fine. But as soon as it got cold ( or normal temperature) the set at first started to blink brightly with all displayed menu, then it gradually went dimmer and then there is only a dim white light blinking and the phone is not working from now on.
i have repeated the heating --- it went on – all displayed – got cold – light dim – no operation.

any idea anybody?????
with thanks in advance
wish u all a very happy new year

Full erase and flash , write good pm and unlock. and post reply.

metro2mobile · 12-28-2008, 07:37

yes brother Full erase and flash , write good pm and unlock. and post reply.

100%

pogs1962 · 12-28-2008, 07:41

try this sir after complete flash replace the LCD terminal

guljee786 · 12-28-2008, 12:23

Quote:

Originally Posted by gaathey

Full erase and flash , write good pm and unlock. and post reply.

no brother its 70% in hardwaire because u heat up the pcb not flach i c i think first try to rehote cpu and chek lcd conectore and chand a good lcd may b ur problem ill be solve insha allaahhh.
.
.
.
.Guljee

vijay_hitech · 01-03-2009, 11:12

Quote:

Originally Posted by chhoton

one 2300 is blinking very dimly with white dim light. I have tried with different versions of firmware but to no result. Then i have heated the pcb and the set was running fine. But as soon as it got cold ( or normal temperature) the set at first started to blink brightly with all displayed menu, then it gradually went dimmer and then there is only a dim white light blinking and the phone is not working from now on.
i have repeated the heating --- it went on – all displayed – got cold – light dim – no operation.

any idea anybody?????
with thanks in advance
wish u all a very happy new year

bro just rehot flash ic your problem is solve 10000000000000000000000%

chhoton · 01-13-2009, 08:37

Nothing is solved yet.....

Any idea anybody?????????

spring · 02-11-2009, 15:43

treid to write pm, now mobile not at all switching on. Flashed with new flash file twice no use, now i am not able write pm file its triing to boot in normal mode if tried to switch on in test, local or normal mode display is blinks & it will not boot in any mode. please help me Guljee......
set 2300 rm-4 now no display not able to swithc on.
thank u in advance

minhajul islam · 02-13-2009, 15:28

re solder flasher Ic try this solution

shalinga · 10-16-2009, 08:18

try 2 flash manual after flash do unlock and factory setting it works 1000%.

12-28-2008, 07:00	#1 (permalink)
chhoton Freak Poster Join Date: Jul 2007 Location: INDIA Posts: 436 Member: 542743 Status: Offline Thanks Meter: 81	2300 display problem one 2300 is blinking very dimly with white dim light. I have tried with different versions of firmware but to no result. Then i have heated the pcb and the set was running fine. But as soon as it got cold ( or normal temperature) the set at first started to blink brightly with all displayed menu, then it gradually went dimmer and then there is only a dim white light blinking and the phone is not working from now on. i have repeated the heating --- it went on – all displayed – got cold – light dim – no operation. any idea anybody????? with thanks in advance wish u all a very happy new year

02-11-2009, 15:43	#8 (permalink)
spring Insane Poster Join Date: Jan 2006 Posts: 83 Member: 225922 Status: Offline Thanks Meter: 3	2300 dim display treid to write pm, now mobile not at all switching on. Flashed with new flash file twice no use, now i am not able write pm file its triing to boot in normal mode if tried to switch on in test, local or normal mode display is blinks & it will not boot in any mode. please help me Guljee...... set 2300 rm-4 now no display not able to swithc on. thank u in advance Last edited by spring; 02-11-2009 at 15:49.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 2300 display problem	vinkle	Nokia Hardware & Hardware Repair	1	11-12-2009 09:01
2300 displays serial number as ?????????????	sohail424	Nokia Digital Core Technology 4 ( DCT-4 )	12	11-03-2007 13:49
2300 display shows car symbol	skarthickk	Nokia Digital Core Technology 4 ( DCT-4 )	5	06-18-2007 21:06
2300 display light jumper	jignesh_1000	Nokia Hardware & Hardware Repair	10	03-28-2006 17:50
Display problem in 2300	ansartec	Nokia Digital Core Technology 4 ( DCT-4 )	8	06-11-2004 18:27

12-28-2008, 07:37	#3 (permalink)
metro2mobile No Life Poster Join Date: May 2007 Posts: 1,181 Member: 515972 Status: Offline Thanks Meter: 526	yes brother Full erase and flash , write good pm and unlock. and post reply. 100%

12-28-2008, 07:41	#4 (permalink)
pogs1962 Freak Poster Join Date: Feb 2008 Posts: 184 Member: 703094 Status: Offline Thanks Meter: 23	try this sir after complete flash replace the LCD terminal

01-13-2009, 08:37	#7 (permalink)
chhoton Freak Poster Join Date: Jul 2007 Location: INDIA Posts: 436 Member: 542743 Status: Offline Thanks Meter: 81	Nothing is solved yet..... Any idea anybody?????????

02-13-2009, 15:28	#9 (permalink)
minhajul islam Freak Poster Join Date: Dec 2008 Location: bangladesh in dhaka Age: 26 Posts: 186 Member: 933507 Status: Offline Thanks Meter: 84	re solder flasher Ic try this solution

10-16-2009, 08:18	#10 (permalink)
shalinga Major Poster Join Date: Oct 2007 Location: Sri Lanka Posts: 40 Member: 608407 Status: Offline Thanks Meter: 1	try 2 flash manual after flash do unlock and factory setting it works 1000%.