2300 problem - GSM-Forum

gsm-fault · 01-17-2008, 04:11

i have a 2300 model when i call it shows batry low the show batry emty and offf
i change batry then also same problem

any one have its tested solution....

ZENITHMOBILE · 01-17-2008, 04:57

after calling immediatelly check which part of the pcb is heating probably most this fault comes due to P.A. Change the P.A problem will be get solved
Good Luck

dj fatal · 01-22-2008, 09:57

Check your connector.

**.:SARCAR:.** · 01-22-2008, 19:28

first clean the pcb well
check bat connector speciely middle pin (bsi)
if same fault check short capasitors & finaly change PA

post result

sopnil · 01-22-2008, 19:50

its a pa fault so change pa

prenika kalra · 01-23-2008, 09:52

my problen is ek 6600 me joystic kaam nahi kar rahi hai me kay karu

prenika kalra · 01-23-2008, 09:54

aur key pad ic key nicha print nahi hai to mea kay karu plz help me

jimm07ct · 01-23-2008, 11:39

bro,

change pa

100% solve your problem

post youir result

best of luck

jimmy

aryan_ · 01-23-2008, 20:01

Quote:

Originally Posted by prenika kalra

aur key pad ic key nicha print nahi hai to mea kay karu plz help me

can u plz show pic which prints are available on mother board bro

01-17-2008, 04:11	#1 (permalink)
gsm-fault Insane Poster Join Date: Oct 2007 Posts: 98 Member: 601371 Status: Offline Thanks Meter: 12	2300 problem i have a 2300 model when i call it shows batry low the show batry emty and offf i change batry then also same problem any one have its tested solution....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2300 problem with pmm	MadPhone	UFS2 + UFS3-Tornadoflasher	7	10-14-2006 20:10
2300 problem	--==Dixon==--	Nokia Digital Core Technology 4 ( DCT-4 )	14	05-24-2005 12:27
new 2300 problem (radio & auto-shutoff)	etcelfon	Nokia Hardware & Hardware Repair	2	04-20-2005 08:05
2300 Problems	ahmedksal	Nokia Hardware & Hardware Repair	4	10-17-2004 15:06

01-17-2008, 04:57	#2 (permalink)
ZENITHMOBILE Freak Poster Join Date: Mar 2007 Posts: 223 Member: 465901 Status: Offline Thanks Meter: 45	after calling immediatelly check which part of the pcb is heating probably most this fault comes due to P.A. Change the P.A problem will be get solved Good Luck

01-22-2008, 09:57	#3 (permalink)
dj fatal Junior Member Join Date: Jan 2008 Posts: 31 Member: 673160 Status: Offline Thanks Meter: 3	Check your connector.

01-22-2008, 19:28	#4 (permalink)
.:SARCAR:. Moderator Join Date: Jul 2006 Location: Midnapore,West-Bengal,India Posts: 5,402 Member: 322206 Status: Offline Sonork: 100.1594813/.:SARCAR:. Thanks Meter: 1,350	first clean the pcb well check bat connector speciely middle pin (bsi) if same fault check short capasitors & finaly change PA post result

01-22-2008, 19:50	#5 (permalink)
sopnil No Life Poster Join Date: Jun 2007 Location: dhaka,bangladesh Posts: 790 Member: 528679 Status: Offline Thanks Meter: 268	its a pa fault so change pa

01-23-2008, 09:52	#6 (permalink)
prenika kalra Junior Member Join Date: May 2006 Posts: 38 Member: 278929 Status: Offline Thanks Meter: 4	my problen is ek 6600 me joystic kaam nahi kar rahi hai me kay karu

01-23-2008, 09:54	#7 (permalink)
prenika kalra Junior Member Join Date: May 2006 Posts: 38 Member: 278929 Status: Offline Thanks Meter: 4	aur key pad ic key nicha print nahi hai to mea kay karu plz help me

01-23-2008, 11:39	#8 (permalink)
jimm07ct No Life Poster Join Date: Jan 2007 Location: agrabad,ctg,Bangladesh Age: 41 Posts: 1,406 Member: 426688 Status: Offline Sonork: 100.1596204 Thanks Meter: 524	bro, change pa 100% solve your problem post youir result best of luck jimmy