2600 failing to boot - GSM-Forum

chiefonline · 05-14-2008, 09:43

i have a 2600 which was restarting.i tried to flash it but no success so at the end i eresed memory and write a pm.after writing the pm file the fon when you switch it,it has a blue light and restarts continuously,please gurus help me i am stranded,if possible also give me a good working pm file.

manyosa · 05-17-2008, 14:40

Try to use different cable to check boot problem if still reflow flash ic and try to reflash it.

mobilespeed · 05-17-2008, 16:15

Quote:

Originally Posted by manyosa

Try to use different cable to check boot problem if still reflow flash ic and try to reflash it.

" yes the procedure is relevant"

KK Mobile · 05-17-2008, 16:23

Firstly Full erase flash then flash it after that write pm file(which is given below 100% ok pm)after that unlock it.Hope it will work.
If still exist then reball Flash ic.

05-14-2008, 09:43	#1 (permalink)
chiefonline Freak Poster Join Date: Nov 2006 Location: Zimbabwe Posts: 150 Member: 390858 Status: Offline Thanks Meter: 29	2600 failing to boot i have a 2600 which was restarting.i tried to flash it but no success so at the end i eresed memory and write a pm.after writing the pm file the fon when you switch it,it has a blue light and restarts continuously,please gurus help me i am stranded,if possible also give me a good working pm file.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BB5 Unlock Failed -> Failed to Boot / Prepare Phone	monkeymobile	Cyclonebox	5	01-03-2010 16:20
!!! E65 Failed to Create RPL from phone -> Failed to Boot / Prepare Phone !!!	sirbigman	Cyclonebox	12	07-08-2009 15:05
2600 Failed To Do Ui And Fail To Change Mode	celluniversal	Nokia Digital Core Technology 4 ( DCT-4 )	1	09-02-2006 13:03
2600 Fails to Unlock with UFS-3 . But Griffin Does .	Aamir_Zia	UFS2 + UFS3-Tornadoflasher	10	01-17-2005 13:06

05-17-2008, 14:40	#2 (permalink)
manyosa No Life Poster Join Date: May 2006 Location: Tanzania Posts: 1,562 Member: 271974 Status: Offline Thanks Meter: 97	Try to use different cable to check boot problem if still reflow flash ic and try to reflash it.