2626 Dead after Remove PA - GSM-Forum

Adil Mobiles · 11-20-2008, 16:54

Hello, I Remove the PA of 2626 after removing its PA, It is shoring.

Any Friend Faced this problem and solved it.

or have any comment about it?

Thanx in Advance.

sameer918 · 11-20-2008, 17:33

yes its possible....Check carefully that the point of under pf on motherboard where direct voltage 3.7v is coming from battery is shot*(contact with ground with some sparking). Check and reply

Adil Mobiles · 11-26-2008, 12:00

Quote:

Originally Posted by sameer918

yes its possible....Check carefully that the point of under pf on motherboard where direct voltage 3.7v is coming from battery is shot*(contact with ground with some sparking). Check and reply

Dear can u explain with picture. will thankful to u

pkghosh1 · 11-27-2008, 22:53

try to flash........................

Adil Mobiles · 11-28-2008, 19:52

Quote:

Originally Posted by pkghosh1

try to flash........................

Dear phone is directly shot on supply. not software fault its hardware fault

any other solution

but now need quick.

Thanx very much

pavankumar. · 12-16-2010, 08:34

set was water damage not getting softwere ,set is dead condition so wt can I do pls....................... help me

ARIF GIGANI · 12-16-2010, 13:57

try rimove r22 ........................

balajiinfocom · 12-16-2010, 17:22

Quote:

Originally Posted by adil mobiles

hello, i remove the pa of 2626 after removing its pa, it is shoring.

Any friend faced this problem and solved it.

Or have any comment about it?

Thanx in advance.

bro first u clean the pcb, and the shorting is in

pa's track.

11-20-2008, 16:54	#1 (permalink)
Adil Mobiles Freak Poster Join Date: Feb 2006 Location: Seraat-e-Mustaqeem Age: 38 Posts: 491 Member: 228476 Status: Offline Sonork: 100.1575078 Thanks Meter: 114	2626 Dead after Remove PA Hello, I Remove the PA of 2626 after removing its PA, It is shoring. Any Friend Faced this problem and solved it. or have any comment about it? Thanx in Advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V3i dead after reflow PA	scarb-man	Motorola Hardware Repair	2	01-22-2007 05:17
6280 dead after rehot PA help plz	jimmylamz	Nokia Hardware & Hardware Repair	9	11-25-2006 10:36
t630 dead after removing RSA	GSMATRIX0130	Sony Ericsson	17	03-01-2005 02:24
8210 dead after reflow PA.	hooi76	Nokia Hardware & Hardware Repair	3	02-21-2003 12:40
8310 searching & dead after change PA	watch man	Nokia Hardware & Hardware Repair	10	09-30-2002 20:49

11-20-2008, 17:33	#2 (permalink)
sameer918 No Life Poster Join Date: Apr 2008 Location: India Posts: 575 Member: 754208 Status: Offline Thanks Meter: 67	yes its possible....Check carefully that the point of under pf on motherboard where direct voltage 3.7v is coming from battery is shot*(contact with ground with some sparking). Check and reply

11-27-2008, 22:53	#4 (permalink)
pkghosh1 Freak Poster Join Date: Oct 2006 Posts: 286 Member: 367027 Status: Offline Thanks Meter: 50	try to flash........................

12-16-2010, 08:34	#6 (permalink)
pavankumar. Junior Member Join Date: Dec 2010 Posts: 9 Member: 1462814 Status: Offline Sonork: [email protected] Thanks Meter: 1	set was water damage not getting softwere ,set is dead condition so wt can I do pls....................... help me

12-16-2010, 13:57	#7 (permalink)
ARIF GIGANI No Life Poster Join Date: Nov 2008 Location: gujarat, india Posts: 1,130 Member: 890965 Status: Offline Sonork: 100.1605360 Thanks Meter: 180	try rimove r22 ........................