3220 Restarting problem - GSM-Forum

skd_123 · 05-09-2006, 15:12

I 3220 it have problem when i turn on the set is show Nokia logo and sound after this set is restart and two or three time set blinking then it is turn off I flash mcu+ppm+cnt+pm+ui option but problem is still sam any have idia abuot this problem ? pleas help me

ctl · 05-09-2006, 16:44

Flash phone with mcu 5.10, cnt 128 and goog PM.

ctl · 05-09-2006, 16:46

[email protected]

skd_123 · 05-10-2006, 07:39

Where can i get 128cnt pleas any one help me thanks in advance

.::Moby World::. · 05-10-2006, 08:20

use search
do as ctl said it worked with too
good luck
br

mobile-bd.com · 05-10-2006, 18:05

Flash phone with mcu 5.10,

gsmawake · 05-11-2006, 15:58

hello mates! can i flash 3220 with 5.50 mcu n ppm and with 4.94 cnt128? have no 5.50 cnt 128 here. tnx!! need help........

GSM WIZARD · 05-11-2006, 16:10

flash your phone with 5.10mcu and ppm.after it shows local mode,select only cnt and flash it only.if it doesnt power back when complete,try another cnt only.keep flashing cnt till it shows you local mode.write pm and ui settings.phone will be ok.
regards.

gsmawake · 05-13-2006, 18:29

Quote:

Originally Posted by GSM WIZARD

flash your phone with 5.10mcu and ppm.after it shows local mode,select only cnt and flash it only.if it doesnt power back when complete,try another cnt only.keep flashing cnt till it shows you local mode.write pm and ui settings.phone will be ok.
regards.

tnx man.. it worked for me!

BR

sama2010 · 05-13-2006, 19:43

hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

gsmawake · 05-14-2006, 11:28

i have here 2 dead units of 3220. after rehot upp's and flash ic's. now flashing to ufs_dctxbb5 ver 1.4dHWK. now the strange thing is..... at xcact flashing time and xcact flash area, these 2 phones have similar result:

1st Boot Ok, DCT4, UPP: 1130
Rebooting Mobile
1st Boot Ok, DCT4, UPP: 1130
Fl0: 0x01000000-0x01FFFFFF,00EC22F8,Sam K8S2815ET
Algorithm: u_amd.fia, Ver: 4.49.0
Algorithm Ok, MSID: 8462F0C2C3A4C2E9C36EB0EAD8
Decoded MSID: 9976BAE9-00DC87F0-A9000000
Encoded FAID: 7C9EF136-EE839266-50453C62
Area1: 0x01000000-0x0101FFFF Erased, Time: 0:01
Area2: 0x01020000-0x0181FFFF Erased, Time: 1:27
Area3: 0x01E60000-0x01FDFFFF Erased, Time: 0:16
Write Error: hDat 14, at: 0x01020000:08
Process Failed, Repowering Mobile

kendy_ooi · 05-14-2006, 15:50

i think is ueme problum....try to re****..good luck

khem · 08-12-2007, 14:43

thnks for info..................

Mourad120 · 08-12-2007, 17:45

Quote:

Originally Posted by gsmawake

i have here 2 dead units of 3220. after rehot upp's and flash ic's. now flashing to ufs_dctxbb5 ver 1.4dHWK. now the strange thing is..... at xcact flashing time and xcact flash area, these 2 phones have similar result:

1st Boot Ok, DCT4, UPP: 1130
Rebooting Mobile
1st Boot Ok, DCT4, UPP: 1130
Fl0: 0x01000000-0x01FFFFFF,00EC22F8,Sam K8S2815ET
Algorithm: u_amd.fia, Ver: 4.49.0
Algorithm Ok, MSID: 8462F0C2C3A4C2E9C36EB0EAD8
Decoded MSID: 9976BAE9-00DC87F0-A9000000
Encoded FAID: 7C9EF136-EE839266-50453C62
Area1: 0x01000000-0x0101FFFF Erased, Time: 0:01
Area2: 0x01020000-0x0181FFFF Erased, Time: 1:27
Area3: 0x01E60000-0x01FDFFFF Erased, Time: 0:16
Write Error: hDat 14, at: 0x01020000:08
Process Failed, Repowering Mobile

Erase the whole flash Area and flash again ....if not ...u need to take out flash memory ic , reball it and finally put it back ...i have managed to repair many pieces likewise ..

Best.Regards.

05-09-2006, 15:12	#1 (permalink)
skd_123 Freak Poster Join Date: Apr 2006 Posts: 230 Member: 268930 Status: Offline Thanks Meter: 23	3220 Restarting problem I 3220 it have problem when i turn on the set is show Nokia logo and sound after this set is restart and two or three time set blinking then it is turn off I flash mcu+ppm+cnt+pm+ui option but problem is still sam any have idia abuot this problem ? pleas help me

05-09-2006, 16:44	#2 (permalink)
ctl Freak Poster Join Date: Feb 2006 Location: Brazil Age: 49 Posts: 98 Member: 229576 Status: Offline Thanks Meter: 9	Solution Flash phone with mcu 5.10, cnt 128 and goog PM.

05-09-2006, 16:46	#3 (permalink)
ctl Freak Poster Join Date: Feb 2006 Location: Brazil Age: 49 Posts: 98 Member: 229576 Status: Offline Thanks Meter: 9	For more help [email protected]

05-14-2006, 11:28	#11 (permalink)
gsmawake Freak Poster Join Date: May 2006 Location: copenhagen Age: 43 Posts: 213 Member: 274299 Status: Offline Thanks Meter: 15	3220 : did u encounter this??????? i have here 2 dead units of 3220. after rehot upp's and flash ic's. now flashing to ufs_dctxbb5 ver 1.4dHWK. now the strange thing is..... at xcact flashing time and xcact flash area, these 2 phones have similar result: 1st Boot Ok, DCT4, UPP: 1130 Rebooting Mobile 1st Boot Ok, DCT4, UPP: 1130 Fl0: 0x01000000-0x01FFFFFF,00EC22F8,Sam K8S2815ET Algorithm: u_amd.fia, Ver: 4.49.0 Algorithm Ok, MSID: 8462F0C2C3A4C2E9C36EB0EAD8 Decoded MSID: 9976BAE9-00DC87F0-A9000000 Encoded FAID: 7C9EF136-EE839266-50453C62 Area1: 0x01000000-0x0101FFFF Erased, Time: 0:01 Area2: 0x01020000-0x0181FFFF Erased, Time: 1:27 Area3: 0x01E60000-0x01FDFFFF Erased, Time: 0:16 Write Error: hDat 14, at: 0x01020000:08 Process Failed, Repowering Mobile

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 3220 auto restart problem	Gautam Mhz	Nokia Hardware & Hardware Repair	1	10-26-2009 09:59
nokia 3220 restart problem	Shakeel_pattoki	Nokia Hardware & Hardware Repair	0	03-11-2008 19:13
3220 restart problem	ismail52	Nokia Hardware & Hardware Repair	24	08-12-2007 19:45
3220 restarts	hdeshmeh	Nokia Digital Core Technology 4 ( DCT-4 )	3	04-21-2005 22:57

05-10-2006, 07:39	#4 (permalink)
skd_123 Freak Poster Join Date: Apr 2006 Posts: 230 Member: 268930 Status: Offline Thanks Meter: 23	Where can i get 128cnt pleas any one help me thanks in advance

05-10-2006, 08:20	#5 (permalink)
.::Moby World::. Registered User Join Date: Dec 2003 Location: Algeria Age: 47 Posts: 407 Member: 47936 Status: Offline Thanks Meter: 20	use search do as ctl said it worked with too good luck br

05-10-2006, 18:05	#6 (permalink)
mobile-bd.com Junior Member Join Date: May 2006 Posts: 24 Member: 269773 Status: Offline Thanks Meter: 0	Flash phone with mcu 5.10,

05-11-2006, 15:58	#7 (permalink)
gsmawake Freak Poster Join Date: May 2006 Location: copenhagen Age: 43 Posts: 213 Member: 274299 Status: Offline Thanks Meter: 15	hello mates! can i flash 3220 with 5.50 mcu n ppm and with 4.94 cnt128? have no 5.50 cnt 128 here. tnx!! need help........

05-11-2006, 16:10	#8 (permalink)
GSM WIZARD Freak Poster Join Date: Jan 2006 Location: mars under soft & hardware.... Posts: 237 Member: 217604 Status: Offline Thanks Meter: 12	flash your phone with 5.10mcu and ppm.after it shows local mode,select only cnt and flash it only.if it doesnt power back when complete,try another cnt only.keep flashing cnt till it shows you local mode.write pm and ui settings.phone will be ok. regards.

05-13-2006, 19:43	#10 (permalink)
sama2010 Junior Member Join Date: May 2006 Posts: 1 Member: 275940 Status: Offline Thanks Meter: 0	hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

05-14-2006, 15:50	#12 (permalink)
kendy_ooi Insane Poster Join Date: May 2006 Location: malaysia Posts: 88 Member: 274050 Status: Offline Thanks Meter: 8	i think is ueme problum....try to re****..good luck

08-12-2007, 14:43	#13 (permalink)
khem No Life Poster Join Date: Apr 2006 Location: Fast-Code™ MBKPHONE Ltd Age: 38 Posts: 1,889 Member: 269035 Status: Offline Sonork: 1,618,0786 Thanks Meter: 301	thnks for info..................