3310 leds always ON - GSM-Forum

fm-gsm · 11-01-2001, 01:32

The 3310 works OK, but the leds are always on What do you think about? best regards

smeg · 11-01-2001, 02:11

If its just LCD leds then I would say water damage, I have repaired around 10-15 with this problem, I just wash/scrub board with switch cleaner and toothbrush and no more leds on!

fm-gsm · 11-01-2001, 02:44

Hi Thanks to replay I will try your solution best regards

gsm_boy · 11-01-2001, 03:10

Hi

And may b by checking N400... <img src="wink.gif" border="0">

Good Luck

<img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <img src="smile.gif" border="0">

rayes · 11-01-2001, 23:26

Hi

If there is no water damaged then it is a software problem 10000 % I solved it many times...

try and tell me

[email protected]

Skyfox · 11-02-2001, 00:18

If no water damage and the lights is on even the phone is power off its 100% N400 IC. Change it.

Raheeeeb · 11-02-2001, 02:04

hi .. simply it s a short tothbrush always make electrosatic charge on the board please do as follow u must use cotton with any board cleaner(dry only) this after u move all leds ... then heat the board and re soldier the leds and say thanx to the best in the hardware...

Madxim · 11-05-2001, 13:04

Check R406

welly2000 · 11-05-2001, 14:26

i repaired about 30 phones with this problem with software updating using super trio

GSMlearner · 11-05-2001, 17:42

CHECK YOUR MAIL dear fm.

GsmSolution · 11-05-2001, 18:07

[quote]Originally posted by welly2000: i repaired about 30 phones with this problem with software updating using super trio<hr></blockquote>

It not a software problem mostly is hardware problem.I have repair many of this problem all hardware problem.The people post on the hardware solution all work 100%. 3310 led always on and blinking. When change led(blue,red green.....),water damage and drop set this mostly happen. So many hardware solution in this topic very nice. <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

[ 05 November 2001: Message edited by: GsmSolution ]

fm-gsm · 11-06-2001, 04:11

Hi Thank you my friends it's N400 problem. I change it best regards

smeg · 11-07-2001, 01:23

Soz, I will keep my ***** shut next time!!

Regards

Jimmy

irfanali1987 · 07-17-2008, 08:49

check or change 20 leged ic which control ur vb led backlight

11-01-2001, 01:32	#1 (permalink)
fm-gsm Freak Poster Join Date: Jul 2001 Location: :-) Posts: 396 Member: 5376 Status: Offline Thanks Meter: 1	3310 leds always ON The 3310 works OK, but the leds are always on<br />What do you think about?<br />best regards

11-01-2001, 02:44	#3 (permalink)
fm-gsm Freak Poster Join Date: Jul 2001 Location: :-) Posts: 396 Member: 5376 Status: Offline Thanks Meter: 1	Hi<br />Thanks to replay<br />I will try your solution<br />best regards

11-05-2001, 18:07	#11 (permalink)
GsmSolution No Life Poster Join Date: Mar 2001 Location: Some where around the world. Posts: 720 Member: 3845 Status: Offline Thanks Meter: 2	[quote]Originally posted by welly2000:<br /><strong>i repaired about 30 phones with this problem with software updating using super trio</strong><hr></blockquote> It not a software problem mostly is hardware problem.I have repair many of this problem all hardware problem.The people post on the hardware solution all work 100%.<br />3310 led always on and blinking.<br />When change led(blue,red green.....),water damage and drop set this mostly happen.<br />So many hardware solution in this topic very nice. <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> [ 05 November 2001: Message edited by: GsmSolution ]</p>

11-06-2001, 04:11	#12 (permalink)
fm-gsm Freak Poster Join Date: Jul 2001 Location: :-) Posts: 396 Member: 5376 Status: Offline Thanks Meter: 1	Hi<br />Thank you my friends<br />it's N400 problem. I change it <br />best regards

11-07-2001, 01:23	#13 (permalink)
smeg Insane Poster Join Date: Sep 2000 Location: England Posts: 66 Member: 2031 Status: Offline Thanks Meter: 0	Soz,<br />I will keep my ***** shut next time!! Regards Jimmy

11-01-2001, 02:11	#2 (permalink)
smeg Insane Poster Join Date: Sep 2000 Location: England Posts: 66 Member: 2031 Status: Offline Thanks Meter: 0	If its just LCD leds then I would say water damage, I have repaired around 10-15 with this problem, I just wash/scrub board with switch cleaner and toothbrush and no more leds on!

11-01-2001, 03:10	#4 (permalink)
gsm_boy Freak Poster Join Date: Apr 2001 Location: INDIA Posts: 207 Member: 4223 Status: Offline Thanks Meter: 4	Hi And may b by checking N400... <img src="wink.gif" border="0"> Good Luck <img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <img src="smile.gif" border="0">

11-01-2001, 23:26	#5 (permalink)
rayes Junior Member Join Date: Jul 2001 Posts: 21 Member: 5465 Status: Offline Thanks Meter: 0	Hi If there is no water damaged then it is a software problem 10000 % I solved it many times... try and tell me [email protected]

11-02-2001, 00:18	#6 (permalink)
Skyfox Insane Poster Join Date: Aug 2000 Location: Russia Age: 48 Posts: 96 Member: 1881 Status: Offline Thanks Meter: 1	If no water damage and the lights is on even the phone is power off its 100% N400 IC. Change it.

11-02-2001, 02:04	#7 (permalink)
Raheeeeb No Life Poster Join Date: Oct 2001 Location: -------- Age: 55 Posts: 1,009 Member: 7062 Status: Offline Thanks Meter: 126	hi .. simply it s a short tothbrush always make electrosatic charge on the board please do as follow u must use cotton with any board cleaner(dry only) this after u move all leds ... then heat the board and re soldier the leds and say thanx to the best in the hardware...

11-05-2001, 13:04	#8 (permalink)
Madxim Insane Poster Join Date: Jan 2001 Location: Latvia Age: 52 Posts: 88 Member: 3022 Status: Offline Thanks Meter: 1	Check R406

11-05-2001, 14:26	#9 (permalink)
welly2000 Freak Poster Join Date: Jul 2001 Age: 51 Posts: 427 Member: 5265 Status: Offline Thanks Meter: 2	i repaired about 30 phones with this problem with software updating using super trio

11-05-2001, 17:42	#10 (permalink)
GSMlearner Freak Poster Join Date: Mar 2001 Location: bermuda triangle Posts: 179 Member: 3876 Status: Offline Thanks Meter: 4	CHECK YOUR MAIL dear fm.

07-17-2008, 08:49	#14 (permalink)
irfanali1987 Junior Member Join Date: May 2008 Posts: 15 Member: 770002 Status: Offline Sonork: 123 Thanks Meter: 6	check or change 20 leged ic which control ur vb led backlight

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
e330 keypad leds always on?	VILJ	Samsung Hardware Repair	1	12-19-2005 17:27
nk3310 led always on n off	loverchew	Nokia Hardware & Hardware Repair	1	09-26-2005 16:04
2100 panel leds always on	Beyond Matrix	Nokia Hardware & Hardware Repair	4	12-30-2004 03:23
D410 Service Led always on	Bay	Samsung Hardware Repair	2	10-20-2004 10:45
3310 LED always ON	greenapple	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	09-01-2001 21:25