GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Nokia > Nokia Hardware & Hardware Repair


Nokia Hardware & Hardware Repair all what you need for Hardware Repairing for Nokia Phones. Before writing any thread here try to check the Frequently Asked Questions Section.

Reply
 
LinkBack Thread Tools Display Modes
Old 07-01-2011, 21:22   #1 (permalink)
HUM
No Life Poster
 
HUM's Avatar
 
Join Date: Jul 2005
Location: karachi
Posts: 8,673
Member: 161728
Status: Offline
Sonork: 100.1582708
Thanks Meter: 2,237
..::5130 hang on white screen::..


5130 hang on white screen

history of set:

not water damage

not dropped

action taken:

chk on software

bus check ok but scan failed

try to full flash the phone with higher version with both atf and mxkey (fbus and usb) but in the end phone not responding

not enter to local mode


also try flashing with bt ic and camera but still same


in hardware:

remove bt ic
remove usb ic
remove camera
change lcd
change avilma

finally reball double ic

here is software logs (atf box)


ATF Software Version v7.50
ATF Box FBUS Flash Started...

Number of Image Files: 3
Forcing Test Mode via BUSCHECK...

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

************************************************** ****
TIME STARTS HERE
************************************************** ****

BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 030C1921
ID DWORD 4 : 01033000
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 1790020C
ID DWORD 1 : FAE24950
ID DWORD 2 : 145E17AC
ID DWORD 3 : F925254C
ID DWORD 4 : 72FA1D31
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 273F6D55
CRC 1 : DFAAF68F
Checksum FD

SearchForBootstrap_DCT5..
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_2nd.fg
Boot File - Version 010.042.00
Boot File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Secondary Loader Sent...
ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : 03
SubBlocks : 03
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 00EC ->
Device ID : 2400 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 8A31
2 Sub Block ID : 11 STORAGE_DEVICE_CONTENTS_BB5
Block Length : 13
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Device Contents : 00000000000000000000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
Checksum : D5
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
FLS1SendAlgoCodeEx..
SendAlgoCode_DCT5..
SearchForAlgorithm_DCT5..
Looking for ALL Devices...
Searching Algorithm Files NOR (00) ManID :00EC DevID :2400 ExtID :0000 RevID :8A31
Flash Descriptor
Manufacturer Code : 00EC
Device ID : 2400
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 04000000 (64 MB)
VPP Info : 0009
Erase10s : 28
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
VPPInfo : VPP_INFO_3V_MASK VPP_INFO_9V_MASK
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_algo.fg
Algorithm File - Version 010.040.00
Algorithm File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForAlgorithm_DCT5 : No Error - 0 (0x00)
TransmissionTypeRequest_DCT5...
SuggestedType : 01 16BIT
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 01 DC
ReturnedType : 01 16BIT
TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

Uploading ALGO File...
SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
CMT PAPUBKEYS HASH:
0C917F11196FDB7378C18EF7260698CA4489DCA0

Scanning Simlock Applet Type...
OK

=================================================
PA_SL3 Applet detected
=================================================

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...

FlashInfo.RestartMode : 2
Waiting for Phone to Go Online...
Elapsed Time: 1s
Elapsed Time: 2s
Elapsed Time: 3s
Elapsed Time: 4s
Elapsed Time: 5s
Elapsed Time: 6s
Elapsed Time: 7s
Elapsed Time: 8s
Elapsed Time: 9s
Elapsed Time: 10s


ERROR : PHONE READ INFO FAILED

Use "BUSCHECK" Button to Force the Phone
into Local Mode... Then "SCANPHONE" after.

For N95, N95-8GB and E90 Phones, you need a
Test Mode Adapter to provide some Extra Power
so that the Phone will go into Local Mode...

ERROR : FAILED TO BACKUP, TRY AGAIN...
Changing MODE : FLASH

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

************************************************** ****
TIME STARTS HERE
************************************************** ****

BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 030C1921
ID DWORD 4 : 01033000
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 1790020C
ID DWORD 1 : FAE24950
ID DWORD 2 : 145E17AC
ID DWORD 3 : F925254C
ID DWORD 4 : 72FA1D31
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 273F6D55
CRC 1 : DFAAF68F
Checksum FD

SearchForBootstrap_DCT5..
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_2nd.fg
Boot File - Version 010.042.00
Boot File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Secondary Loader Sent...
ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : 03
SubBlocks : 03
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 00EC ->
Device ID : 2400 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 8A31
2 Sub Block ID : 11 STORAGE_DEVICE_CONTENTS_BB5
Block Length : 13
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Device Contents : 00000000000000000000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
Checksum : D5
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
FLS1SendAlgoCodeEx..
SendAlgoCode_DCT5..
SearchForAlgorithm_DCT5..
Looking for ALL Devices...
Searching Algorithm Files NOR (00) ManID :00EC DevID :2400 ExtID :0000 RevID :8A31
Flash Descriptor
Manufacturer Code : 00EC
Device ID : 2400
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 04000000 (64 MB)
VPP Info : 0009
Erase10s : 28
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
VPPInfo : VPP_INFO_3V_MASK VPP_INFO_9V_MASK
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_algo.fg
Algorithm File - Version 010.040.00
Algorithm File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForAlgorithm_DCT5 : No Error - 0 (0x00)
TransmissionTypeRequest_DCT5...
SuggestedType : 01 16BIT
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 01 DC
ReturnedType : 01 16BIT
TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

Uploading ALGO File...
SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
CMT PAPUBKEYS HASH:
0C917F11196FDB7378C18EF7260698CA4489DCA0
START READING RPL DATA
Reading : NPC (CMT)
OK
Reading : VARIANT (CMT)
VARIANT : Empty
Reading : CCC (CMT)
OK
Reading : HWC (CMT)
OK
Reading : R&D (CMT)
OK
FINISHED READING RPL DATA
RPL saved to: C:\AdvanceBox Turbo Flasher\Nokia\backup\353421044276898\3534210442768 98_63913.rpl
FlashInfo.RestartMode : 2

Processing Image File : C:\Program Files\Nokia\Phoenix\Products\RM-495\rm495__07.97.mcusw
CMT Type : BB5
CMT Algorithm : BB5 ALGORITHM
Secondary Sending Speed : 3250000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 1178
Entry Point: 0x5057
Page Format : -1
MAX PAGE : 0x00004000
Changing MODE : FLASH
VBATT OFF...
VBATT ON
Setting VBATT Done!...

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
VBATT OFF...
VBATT ON
Setting VBATT Done!...

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

************************************************** ****
TIME STARTS HERE
************************************************** ****

BootFlashModeDCT5Ex Succeeded after 4 Attempts
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 030C1921
ID DWORD 4 : 01033000
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 1790020C
ID DWORD 1 : FAE24950
ID DWORD 2 : 145E17AC
ID DWORD 3 : F925254C
ID DWORD 4 : 72FA1D31
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 273F6D55
CRC 1 : DFAAF68F
Checksum FD

SearchForBootstrap_DCT5..
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_2nd.fg
Boot File - Version 010.042.00
Boot File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Secondary Loader Sent...
ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : 03
SubBlocks : 03
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 00EC ->
Device ID : 2400 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 8A31
2 Sub Block ID : 11 STORAGE_DEVICE_CONTENTS_BB5
Block Length : 13
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Device Contents : 00000000000000000000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
Checksum : D5
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
FLS1SendAlgoCodeEx..
SendAlgoCode_DCT5..
SearchForAlgorithm_DCT5..
Looking for ALL Devices...
Searching Algorithm Files NOR (00) ManID :00EC DevID :2400 ExtID :0000 RevID :8A31
Flash Descriptor
Manufacturer Code : 00EC
Device ID : 2400
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 04000000 (64 MB)
VPP Info : 0009
Erase10s : 28
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
VPPInfo : VPP_INFO_3V_MASK VPP_INFO_9V_MASK
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_algo.fg
Algorithm File - Version 010.040.00
Algorithm File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForAlgorithm_DCT5 : No Error - 0 (0x00)
TransmissionTypeRequest_DCT5...
SuggestedType : 01 16BIT
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 01 DC
ReturnedType : 01 16BIT
TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

Uploading ALGO File...
SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
CMT PAPUBKEYS HASH:
0C917F11196FDB7378C18EF7260698CA4489DCA0
Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT 00 only)
Certificate 1
Name : NPC
ASIC Index : CMT 0
Certificate 2
Name : VAR
ASIC Index : CMT 0
Certificate 3
Name : R&D
ASIC Index : CMT 0
Certificate 4
Name : CCC
ASIC Index : CMT 0
Certificate 5
Name : HWC
ASIC Index : CMT 0
STORE_CERTIFICATE_REQUEST_BB5 : 61 05 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 56 41 52 49 41 4E 54 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 85
STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
No partition info....
VPP Enabled by Software
Using Internal VPP
StartErase_DCT5...
BlockLength : 0x36 (54)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x12
Block Length : 0x33 (51)
BB ASIC Index : 0x00 CMT
Device Type : 0x00 NOR
Device Index : 0x00
0 : 00000000-000006BF
1 : 000006C0-0001FFFF
2 : 00040000-000BFFFF
3 : 000C0000-0013FFFF
4 : 00140000-0137FFFF
5 : 01380000-0151FFFF

Erase_SendEraseBlock_BB5_NOR
Task in Progress... Please Wait...
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 14 STATUS_NOR_OK_BB5
Block Length : 01
BB ASIC Index : 00

Successfully erased..
Time Taken to Erase : 00:01:14
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 04 D9
ReturnedType : 04 DDR & 2TX
TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

Flashing Speed: 5.00 Mhz
Processing : rm495__07.97.mcusw
Total blocks to write : 1178
================================================
FBUS Cable RX2 PIN Diagnostics
================================================
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 14 STATUS_NOR_OK_BB5
Block Length : 01
BB ASIC Index : 00
================================================
INFO: RX2 PIN is OK
================================================
>> CMT Rootkey Hash CERT : NOLO
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : UPDAPP
>> CMT Rootkey Hash CERT : DSP0
>> CMT Rootkey Hash CERT : MCUSW
ContinueFlash_DCT5 Complete
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 14 STATUS_NOR_OK_BB5
Block Length : 01
BB ASIC Index : 00
Continue Flash Complete : : No Error - 0 (0x00)
Time Taken to Flash : 00:01:22

Processing Image File : C:\Program Files\Nokia\Phoenix\Products\RM-495\rm495__07.97.ppm_mena_a1
CMT Type : BB5
CMT Algorithm : BB5 ALGORITHM
Secondary Sending Speed : 3250000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 388
Entry Point: 0x00BE
Page Format : -1
MAX PAGE : 0x00004000
No partition info....
VPP Enabled by Software
Using Internal VPP
StartErase_DCT5...
BlockLength : 0x0E (14)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x00 NOR
Device Index : 0x00
0 : 01520000-01DBFFFF

Erase_SendEraseBlock_BB5_NOR
Task in Progress... Please Wait...
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 14 STATUS_NOR_OK_BB5
Block Length : 01
BB ASIC Index : 00

Successfully erased..
Time Taken to Erase : 00:00:25
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 04 D9
ReturnedType : 04 DDR & 2TX
TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

Flashing Speed: 5.00 Mhz
Processing : rm495__07.97.ppm_mena_a1
Total blocks to write : 388
ContinueFlash_DCT5 Complete
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 14 STATUS_NOR_OK_BB5
Block Length : 01
BB ASIC Index : 00
Continue Flash Complete : : No Error - 0 (0x00)
Time Taken to Flash : 00:00:28

Processing Image File : C:\Program Files\Nokia\Phoenix\Products\RM-495\rm495__07.97.image_mena_a1_red
CMT Type : BB5
CMT Algorithm : BB5 ALGORITHM
Secondary Sending Speed : 3250000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 656
Entry Point: 0x00D0
Page Format : -1
MAX PAGE : 0x00004000
No partition info....
VPP Enabled by Software
Using Internal VPP
StartErase_DCT5...
BlockLength : 0x16 (22)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x12
Block Length : 0x13 (19)
BB ASIC Index : 0x00 CMT
Device Type : 0x00 NOR
Device Index : 0x00
0 : 01DC0000-0215FFFF
1 : 02160000-03FBFFFF

Erase_SendEraseBlock_BB5_NOR
Task in Progress... Please Wait...
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 14 STATUS_NOR_OK_BB5
Block Length : 01
BB ASIC Index : 00

Successfully erased..
Time Taken to Erase : 00:00:47
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 04 D9
ReturnedType : 04 DDR & 2TX
TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

Flashing Speed: 5.00 Mhz
Processing : rm495__07.97.image_mena_a1_red
Total blocks to write : 656
ContinueFlash_DCT5 Complete
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 14 STATUS_NOR_OK_BB5
Block Length : 01
BB ASIC Index : 00
Continue Flash Complete : : No Error - 0 (0x00)
Time Taken to Flash : 00:00:44

Total Flash Write Time (Flashing Only) : 00:02:35
Total Flashing Time (Booting + Erase + Flashing) : 00:05:05

FlashInfo.RestartMode : 2
Forcing Test Mode via BUSCHECK...

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

************************************************** ****
TIME STARTS HERE
************************************************** ****

BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 030C1921
ID DWORD 4 : 01033000
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 1790020C
ID DWORD 1 : FAE24950
ID DWORD 2 : 145E17AC
ID DWORD 3 : F925254C
ID DWORD 4 : 72FA1D31
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 273F6D55
CRC 1 : DFAAF68F
Checksum FD

SearchForBootstrap_DCT5..
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_2nd.fg
Boot File - Version 010.042.00
Boot File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Secondary Loader Sent...
ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : 03
SubBlocks : 03
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 00EC ->
Device ID : 2400 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 8A31
2 Sub Block ID : 11 STORAGE_DEVICE_CONTENTS_BB5
Block Length : 13
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Device Contents : 00000000000000000000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
Checksum : D5
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
FLS1SendAlgoCodeEx..
SendAlgoCode_DCT5..
SearchForAlgorithm_DCT5..
Looking for ALL Devices...
Searching Algorithm Files NOR (00) ManID :00EC DevID :2400 ExtID :0000 RevID :8A31
Flash Descriptor
Manufacturer Code : 00EC
Device ID : 2400
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 04000000 (64 MB)
VPP Info : 0009
Erase10s : 28
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
VPPInfo : VPP_INFO_3V_MASK VPP_INFO_9V_MASK
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_algo.fg
Algorithm File - Version 010.040.00
Algorithm File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForAlgorithm_DCT5 : No Error - 0 (0x00)
TransmissionTypeRequest_DCT5...
SuggestedType : 01 16BIT
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 01 DC
ReturnedType : 01 16BIT
TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

Uploading ALGO File...
SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
CMT PAPUBKEYS HASH:
0C917F11196FDB7378C18EF7260698CA4489DCA0

Scanning Simlock Applet Type...
OK

=================================================
PA_SL3 Applet detected
=================================================

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...

FlashInfo.RestartMode : 2
Waiting for Phone to Go Online...
Elapsed Time: 1s
Elapsed Time: 2s
Elapsed Time: 3s
Elapsed Time: 4s
Elapsed Time: 5s
Elapsed Time: 6s
Elapsed Time: 7s
Elapsed Time: 8s
Elapsed Time: 9s
Elapsed Time: 10s


ERROR : PHONE READ INFO FAILED

Use "BUSCHECK" Button to Force the Phone
into Local Mode... Then "SCANPHONE" after.

For N95, N95-8GB and E90 Phones, you need a
Test Mode Adapter to provide some Extra Power
so that the Phone will go into Local Mode.....::
  Reply With Quote
Old 07-01-2011, 21:25   #2 (permalink)
HUM
No Life Poster
 
HUM's Avatar
 
Join Date: Jul 2005
Location: karachi
Posts: 8,673
Member: 161728
Status: Offline
Sonork: 100.1582708
Thanks Meter: 2,237
here is mkey logs

MXKEY Serial: [FT SCR2000 0] - C0805720
Driver: NMWCD, ver: 7.1.32.62
Module ver: 1.0.0.17309(31-05-2011), Library ver: 1.0.0.10695(31-05-2011)
Processing MCU file: rm495__07.97.mcusw
[BB5,BB5 ALGORITHM] size: 18.20 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 12FE8174
CMT SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
CMT EM0 ID: 00000296
CMT EM1 ID: 00000B22
CMT PUBLIC ID: 1790020CFAE24950145E17ACF925254C72FA1D31
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID: 273F6D55DFAAF68F
Flashing CMT Update Server Data, ULO: 0x3900 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, UPDAPP: 0x4B340 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, PASUBTOC: 0x59940 bytes
Update Server code succesfully sent to phone.
Device found: nmwcdnsuc\Nokia BB5 ADL Loader USB Generic, PORT_ID: 151244C6
Verifying communication to device OK.
Erase size: 21 MB
CMT NOR area [00000000-000006BF] erased in 0.547 s

CMT NOR area [000006C0-0001FFFF] erased in 0.532 s

CMT NOR area [00040000-000BFFFF] erased in 2.360 s

CMT NOR area [000C0000-0013FFFF] erased in 2.187 s

CMT NOR area [00140000-0137FFFF] erased in 1 min 13.797 s

CMT NOR area [01380000-0151FFFF] erased in 6.969 s

Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
Selecting first CMT PAPUB block with matching RootKey.
CMT PAPUBKEYS: 0C917F11196FDB7378C18EF7260698CA4489DCA0 (RAP Certificate 164 v.1) sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
Programming completed in 1 min 33.484 s
Processing PPM file: rm495__07.97.ppm_mena_a1
[BB5,BB5 ALGORITHM] size: 6.07 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 8.62 MB
CMT NOR area [01520000-01DBFFFF] erased in 36.766 s

Flash programming ...
Programming completed in 32.578 s
Processing CNT file: rm495__07.97.image_mena_a1_red
[BB5,BB5 ALGORITHM] page size: 128 K size: 10.26 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 34 MB
CMT NOR area [01DC0000-0215FFFF] erased in 16.797 s

CMT NOR area [02160000-03FBFFFF] erased in 2 min 13.016 s

Flash programming ...
Programming completed in 52.500 s
Total time for flashing process(boot+erase+write) was 7 min 51.984 s
Waiting for device boot up ...
Phone not found, retrying ...

Phone not responding !
  Reply With Quote
Old 07-01-2011, 21:33   #3 (permalink)
No Life Poster
 
Join Date: May 2008
Location: COME & MADE GREEN WORLD
Posts: 3,092
Member: 771937
Status: Offline
Sonork: 100.1605717
Thanks Meter: 1,052
bro this phone not proper solution in software it's 100% rap problem. i try many time but not sucess.
  Reply With Quote
The Following User Says Thank You to debmobile For This Useful Post:
Old 07-01-2011, 21:58   #4 (permalink)
HUM
No Life Poster
 
HUM's Avatar
 
Join Date: Jul 2005
Location: karachi
Posts: 8,673
Member: 161728
Status: Offline
Sonork: 100.1582708
Thanks Meter: 2,237
sir thnx for ur reply


here i add one thing it show nokia only 2 times than white lcd
  Reply With Quote
The Following User Says Thank You to HUM For This Useful Post:
Old 07-01-2011, 22:27   #5 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,541
Member: 1039903
Status: Offline
Thanks Meter: 2,040
easy way to decide its hardware or software
erase ncp data after erasing set come in local mode this means software problem otherwise hardware problem
  Reply With Quote
Old 07-01-2011, 22:36   #6 (permalink)
No Life Poster
 
hitibiti's Avatar
 
Join Date: Mar 2003
Location: Canada
Age: 44
Posts: 8,146
Member: 24023
Status: Offline
Sonork: 100.61317
Thanks Meter: 2,630
Donate money to this user
i think ther is only solution bit ou need cyclone
cose you need first backup RPL , and only cyclone can do backup RPl for dead phones
after that you do full erase , then flash phone , phone will work perfectly expect imei 12346.. so you ned write backup rpl
  Reply With Quote
Old 07-01-2011, 23:24   #7 (permalink)
No Life Poster
 
Kashif Khan's Avatar
 
Join Date: Oct 2004
Location: Holland China Brazil
Age: 43
Posts: 3,815
Member: 88016
Status: Offline
Thanks Meter: 320
already tried but still same
  Reply With Quote
Old 07-01-2011, 23:36   #8 (permalink)
Freak Poster
 
Join Date: Jan 2009
Posts: 125
Member: 942817
Status: Offline
Thanks Meter: 20
Quote:
Originally Posted by Kashif Khan View Post
already tried but still same
have u try change flash ic?
  Reply With Quote
Old 07-02-2011, 10:32   #9 (permalink)
HUM
No Life Poster
 
HUM's Avatar
 
Join Date: Jul 2005
Location: karachi
Posts: 8,673
Member: 161728
Status: Offline
Sonork: 100.1582708
Thanks Meter: 2,237
here is backup rpl taken by atf
Attached Files
File Type: rar 353421044276898_52536.rar (4.2 KB, 90 views)
  Reply With Quote
Old 07-02-2011, 13:50   #10 (permalink)
HUM
No Life Poster
 
HUM's Avatar
 
Join Date: Jul 2005
Location: karachi
Posts: 8,673
Member: 161728
Status: Offline
Sonork: 100.1582708
Thanks Meter: 2,237
here i take backup with atf
  Reply With Quote
Old 07-03-2011, 05:59   #11 (permalink)
Junior Member
 
Join Date: Jan 2008
Location: modasa
Age: 41
Posts: 34
Member: 683852
Status: Offline
Thanks Meter: 0
5130 display blink and restart
  Reply With Quote
Old 07-03-2011, 06:57   #12 (permalink)
No Life Poster
 
MIRPUR AJK's Avatar
 
Join Date: Mar 2008
Posts: 1,301
Member: 725834
Status: Offline
Thanks Meter: 921
Quote:
5130 display blink and restart
change display ic and post result,,,,,,,,,,,,,
  Reply With Quote
Old 07-08-2011, 04:16   #13 (permalink)
HUM
No Life Poster
 
HUM's Avatar
 
Join Date: Jul 2005
Location: karachi
Posts: 8,673
Member: 161728
Status: Offline
Sonork: 100.1582708
Thanks Meter: 2,237
now wats the solution .........................?
  Reply With Quote
Old 07-08-2011, 04:21   #14 (permalink)
No Life Poster
 
rehmani's Avatar
 
Join Date: Aug 2006
Location: proud to be an INDIAN Muslim
Age: 39
Posts: 5,175
Member: 333199
Status: Offline
Sonork: may i help u just pm me
Thanks Meter: 2,405
Donate money to this user
Quote:
Originally Posted by HUM View Post
now wats the solution .........................?
no solution the only solution is change combo ic
  Reply With Quote
Old 07-08-2011, 05:00   #15 (permalink)
Junior Member
 
Join Date: Jan 2008
Posts: 30
Member: 667998
Status: Offline
Thanks Meter: 2
bro please change lcd port on pcb 100% tested
  Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
6110 power does not stay on sc~micro Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-30-2014 08:14
what prog changes imei on 6110 and how do i do it? Ravetrancer Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 3 07-31-2012 20:09

 



All times are GMT +1. The time now is 12:45.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.34176 seconds with 11 queries

SEO by vBSEO