6100 no ringer - GSM-Forum

gsm_style · 03-12-2004, 12:31

I have an 6100 which ringer is not working. its not water damaged .
The phone is working perfect except the ringer is dead, i change the speaker but it's the same problem

ARS · 03-12-2004, 12:48

try to change ringer...

gsm_style · 03-12-2004, 18:54

Quote:

Originally Posted by ARS

try to change ringer...

I did but that's not the problem, ringer is good.

Medz · 03-12-2004, 20:04

@gsm style..

Check N150 (audio power amp - LM48901BLX) reflow or replace it , befor check the audio pathway all .

ARS · 03-13-2004, 18:08

Quote:

Originally Posted by gsm_style

I have an 6100 which ringer is not working. its not water damaged .
The phone is working perfect except the ringer is dead, i change the speaker but it's the same problem

You have changed speeker, not ringer...ringer is in antena part

Arnis A · 03-13-2004, 18:59

Hi
Verify UPP contact N1 under UPP, This contact is often broken

B.R.

Arnis

gsm_style · 03-14-2004, 01:42

Quote:

Originally Posted by Arnis A

Hi
Verify UPP contact N1 under UPP, This contact is often broken

B.R.

Arnis

oke i shall do and if it is broken how can i fix it

gsm_style · 03-14-2004, 16:47

Quote:

Originally Posted by gsm_style

oke i shall do and if it is broken how can i fix it

please can you tell me how i must repair it.

Arnis A · 03-15-2004, 10:03

Hi
@GSM Style

First, measure from R168 to N1 test point (Maybe N1 contact is not damaged and your phone have another problem)
If N1 is damaged you can desolder UPP and repair N1 contact, but you can repair phone without desoldering UPP, you can solder wire from R168 to
UPP N1 test point(see attach)

B.R.

Arnis

love&q · 08-18-2004, 12:07

Yes!UEM and the CPU n1 will cause the problem.I always check this it works for me.

Chris02 · 08-18-2004, 13:07

As medz saif! Problem is N150!

It is nearly normal that the phone don't rings after water damaged!

bestman · 08-19-2004, 20:52

check for ringer in place
check phone setting for ringer on.
check buzzer is ,in place.
check ear - piece is ,in place .
check audio ic's for unsoldered pin attachment on board .
you can reset your phone for full rate feature. on phone.

bestman.

rambo amadeus · 11-24-2004, 05:40

Solved with N150 reflowed,
10x thx to MASTER Medz!

FAP mashina

jamshaidrasul · 12-04-2005, 12:34

hi
i have 6100 water damaged.it is working now except ringer.i cleaned the interfaces ,chnge ringer ,reflow n105 ic,factory setting with ufs 3.but the problem is still remained.

plz.help

br.
jamshaid

banalven1 · 12-04-2005, 16:36

Quote:

Originally Posted by gsm_style

I have an 6100 which ringer is not working. its not water damaged .
The phone is working perfect except the ringer is dead, i change the speaker but it's the same problem

If your spk got sound just rehot or reball UPP,your 6100 will be OK~~~~~~~~~~

03-12-2004, 12:31	#1 (permalink)
gsm_style Freak Poster Join Date: Mar 2003 Location: nederland Age: 52 Posts: 251 Member: 24929 Status: Offline Thanks Meter: 7	6100 no ringer I have an 6100 which ringer is not working. its not water damaged . The phone is working perfect except the ringer is dead, i change the speaker but it's the same problem

12-04-2005, 12:34	#14 (permalink)
jamshaidrasul Insane Poster Join Date: Dec 2005 Posts: 73 Member: 205421 Status: Offline Thanks Meter: 3	6100 ringer is not working hi i have 6100 water damaged.it is working now except ringer.i cleaned the interfaces ,chnge ringer ,reflow n105 ic,factory setting with ufs 3.but the problem is still remained. plz.help br. jamshaid

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3230 no ringer tone,ringer ok ..help...	CHAPRAN	Nokia Hardware & Hardware Repair	4	04-17-2007 10:16
k300 no mic,no spk, no ringer	sagheer	Sony Ericsson Hardware Repair	2	01-22-2007 05:30
6100 no ringer solution	coolmax	Nokia Digital Core Technology 4 ( DCT-4 )	0	12-15-2005 15:33
8310 vibrate but no ring ( no ringer , no ringtone) and not software problem	gsmnice	Nokia Hardware & Hardware Repair	6	05-19-2004 16:25
6100 no ring no vibrate no illumination!!!!!!!!	micmac	Nokia Hardware & Hardware Repair	11	09-18-2003 10:14

03-12-2004, 12:48	#2 (permalink)
ARS No Life Poster Join Date: Dec 2000 Location: Slovakia, Brezno Posts: 980 Member: 2721 Status: Offline Thanks Meter: 23	try to change ringer...

03-12-2004, 20:04	#4 (permalink)
Medz No Life Poster Join Date: Sep 2003 Age: 66 Posts: 807 Member: 39601 Status: Offline Thanks Meter: 13	@gsm style.. Check N150 (audio power amp - LM48901BLX) reflow or replace it , befor check the audio pathway all .

03-13-2004, 18:59	#6 (permalink)
Arnis A Junior Member Join Date: Oct 1999 Location: Latvia Age: 52 Posts: 36 Member: 537 Status: Offline Thanks Meter: 1	Hi Verify UPP contact N1 under UPP, This contact is often broken B.R. Arnis

08-18-2004, 12:07	#10 (permalink)
love&q Freak Poster Join Date: Jan 2004 Posts: 284 Member: 51061 Status: Offline Thanks Meter: 1	Yes!UEM and the CPU n1 will cause the problem.I always check this it works for me.

08-18-2004, 13:07	#11 (permalink)
Chris02 No Life Poster Join Date: Oct 2003 Location: Germany Age: 37 Posts: 5,196 Member: 41076 Status: Offline Thanks Meter: 53	As medz saif! Problem is N150! It is nearly normal that the phone don't rings after water damaged!

08-19-2004, 20:52	#12 (permalink)
bestman No Life Poster Join Date: Apr 2004 Age: 49 Posts: 1,271 Member: 61294 Status: Offline Thanks Meter: 49	check for ringer in place check phone setting for ringer on. check buzzer is ,in place. check ear - piece is ,in place . check audio ic's for unsoldered pin attachment on board . you can reset your phone for full rate feature. on phone. bestman.

11-24-2004, 05:40	#13 (permalink)
rambo amadeus No Life Poster Join Date: Dec 2001 Posts: 1,011 Member: 8208 Status: Offline Thanks Meter: 24	Solved with N150 reflowed, 10x thx to MASTER Medz! FAP mashina