6125 Back ligth and camera-
 

I have 6125 phone with no lcd light and camera problem.
Upper board and flex cables are ok tested with other board
B2B connector resoldered ,I changede z2404 Driver too.but same.
any Idea?

please check coil on rf-board

Sorry but I cant understand what you mean by rf-borad
If you mean main-borad (board with upp tahvo and rf parts) ,I dont see any coil there.can you be specifed?

If you mean upper board with LCD's.It has not problem.it works OK.I have tested this board.

I solved problem
For all of you have 6125 backlight and cam problem.
1) Check Fuse
2) check selfs above fuse.There must be Vbat 4V there
3) check conectin between Capacitor and selfs
4)check selfs connection to connector.
5) change z2404

Look at this pic

And dont forget "Thanks"!lol