6210 Dead! Please give me your opinion - GSM-Forum

Pk2GSM · 06-21-2002, 20:36

Ok mates. I´m going to explain my case.

It was a 6210 phone that was updated to 6250. Then flashing, dejan flasher erased the flash perfectly and when the flash went to 50% the phone dead.

From this moment, the phone doesn´t respond at any soft or any call to reflash it, even with WinDLS function of Flash Dead Phone.

I think it´s a phone hardware problem cause phone must respond at flashing request as I know at least with dejan box.

PD: Cables and interfaces are correctly working 100% tested in other models.

Could somebody tell me how I can repair it?

Pk2GSM
My best regards from Spain.

Lonegunman · 06-22-2002, 04:03

Have you tried roils as it did a few my JIC box could not do and I had given the phones up for dead.

osama44 · 06-24-2002, 07:34

Its hardware problem , Rehot your device carefully and try flash it again .
WBR
Osama Alkhoraish

baybars · 07-13-2002, 15:37

try forced download(select 6210)
or try knok software

jonwillow · 07-13-2002, 18:57

Try change Flash IC F320B3TA, and rehot CCONT.

sawa · 07-14-2002, 04:52

flashing problem.....hmmmm maybe you have damaged procesor.....or flash.....rehoting is VERYYY risky

)))

06-21-2002, 20:36	#1 (permalink)
Pk2GSM Crazy Poster Join Date: May 2002 Location: Spain Posts: 50 Member: 11983 Status: Offline Thanks Meter: 0	6210 Dead! Please give me your opinion Ok mates. I´m going to explain my case. It was a 6210 phone that was updated to 6250. Then flashing, dejan flasher erased the flash perfectly and when the flash went to 50% the phone dead. From this moment, the phone doesn´t respond at any soft or any call to reflash it, even with WinDLS function of Flash Dead Phone. I think it´s a phone hardware problem cause phone must respond at flashing request as I know at least with dejan box. PD: Cables and interfaces are correctly working 100% tested in other models. Could somebody tell me how I can repair it? Pk2GSM My best regards from Spain.

07-13-2002, 15:37	#4 (permalink)
baybars Junior Member Join Date: Jul 2002 Posts: 21 Member: 13757 Status: Offline Thanks Meter: 0	6210 dead try forced download(select 6210) or try knok software

07-14-2002, 04:52	#6 (permalink)
sawa Freak Poster Join Date: Oct 2001 Location: NIS Posts: 251 Member: 6781 Status: Offline Thanks Meter: 0	flashing problem.....hmmmm maybe you have damaged procesor.....or flash.....rehoting is VERYYY risky)))

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
give me your opinion about ust pro	mirko	UST Pro II	20	12-09-2006 11:32
.: To mr Julvir Please give me your address ;.	Jani-Jan	Redbox	11	11-16-2004 22:40
newbie here - soft to s40 ... look and give me your opinion... :)	gacekstasiu	x1x to x45/x50	0	10-12-2002 03:37
Give me your opinion in this if I allowed	ahm424	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-09-2002 21:42

06-22-2002, 04:03	#2 (permalink)
Lonegunman No Life Poster Join Date: Dec 2001 Location: London Age: 49 Posts: 792 Member: 7939 Status: Offline Thanks Meter: 2	Have you tried roils as it did a few my JIC box could not do and I had given the phones up for dead.

06-24-2002, 07:34	#3 (permalink)
osama44 Insane Poster Join Date: Nov 2001 Location: Kingdom of Saudia Arabia Posts: 84 Member: 7155 Status: Offline Thanks Meter: 0	Its hardware problem , Rehot your device carefully and try flash it again . WBR Osama Alkhoraish

07-13-2002, 18:57	#5 (permalink)
jonwillow No Life Poster Join Date: Sep 1999 Location: Europe Age: 43 Posts: 905 Member: 461 Status: Offline Thanks Meter: 2	Try change Flash IC F320B3TA, and rehot CCONT.