GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Nokia > Nokia Hardware & Hardware Repair
Reload this Page 6300 Contact Service After "Startup Phone w/o Sim.?"..
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Nokia Hardware & Hardware Repair all what you need for Hardware Repairing for Nokia Phones. Before writing any thread here try to check the Frequently Asked Questions Section.

Reply
 
LinkBack Thread Tools Display Modes
Old 01-30-2009, 16:39   #1 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 40
Posts: 9,816
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,603
6300 Contact Service After "Startup Phone w/o Sim.?"..

hi all...

what can be problem..? retu changed..rehot completly pcb still same pb..
  Reply With Quote
Old 01-30-2009, 16:45   #2 (permalink)
Insane Poster
 
Join Date: Dec 2007
Posts: 85
Member: 653369
Status: Offline
Thanks Meter: 10
hi.you should erase phone and then wright rpl
  Reply With Quote
Old 01-30-2009, 17:14   #3 (permalink)
Registered User
 
Join Date: Aug 2008
Location: Indonesia
Posts: 196
Member: 828691
Status: Offline
Thanks Meter: 33
sir, post your log tq.
  Reply With Quote
Old 01-30-2009, 17:26   #4 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 40
Posts: 9,816
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,603
Quote:
Originally Posted by xEDIx View Post
sir, post your log tq.
Code:
JAF version 1.98.61
Detected PKEY: 9000XXXX
Card life counter: 58.59%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B0, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 07.00
19-08-08
RM-217
(c) Nokia.           
HW version: 4001
PCI version: 
RFIC version: 	17211721
DSP version: 
ICPR61_08w10
PPM version: V 07.00
19-08-08
RM-217
(c) Nokia.           
C
BT MCM version: 06cc-P9.1
Retu version: 32
Tahvo version: 53
Content Pack version: Content: c
V 07.00
19-08-08
RM-217
(c) Nokia.           

Production serial number: 7K0354114
Product code: 0554603
Module code: 0203166
Basic production code: 0551450
Flash code: 
Order number: 
Product specific data: 
Long production SN: 
ATO: 
Default SN type: 
IMEI plain: 35954401XXXXX12
IMEI spare to net: 3A 95 45 04 21 07 10 01 
IMEI SV to net: 33 95 45 04 21 07 10 21 F2 

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-217.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0554603
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\

Searching for default location of ini...
Checking path: \Products\RM-217\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-217\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.01.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.01.ppm_c
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.01.image_c
APE Variant file: NONE
Languages in ppm: English,German,French,Italian,Dutch,Spanish,Turkish,Portuguese
Done!
  Reply With Quote
Old 01-30-2009, 17:38   #5 (permalink)
Crazy Poster
 
Join Date: May 2007
Posts: 48
Member: 506016
Status: Offline
Thanks Meter: 2
you erase full flash and write full + pm ok = money
ps: backup rpl and 308pm
  Reply With Quote
Old 01-30-2009, 18:35   #6 (permalink)
No Life Poster
 
milkyctg's Avatar
 
Join Date: Mar 2004
Location: cYBER sPACE
Posts: 664
Member: 56855
Status: Offline
Thanks Meter: 77
Replace the retu with a genuine one. Reflow hot air on Rap.
  Reply With Quote
Old 01-30-2009, 18:52   #7 (permalink)
Product Supporter
 
TUR@N ALAM's Avatar
 
Join Date: Feb 2008
Location: Jat-Chi-Bangladesh
Age: 46
Posts: 1,611
Member: 705213
Status: Offline
Sonork: https://wa.link/aru52t
Thanks Meter: 2,735
Quote:
Originally Posted by kokono_nj View Post
you erase full flash and write full + pm ok =
ps: backup rpl and 308pm
kokono_nj HE IS RIGHT


this way go to success

write full flash cmpleat
restore backup rpl and (308pm or)

modify pm with sx4

other ways usb flash compleat
  Reply With Quote
Old 01-30-2009, 21:52   #8 (permalink)
RD7
Freak Poster
 
RD7's Avatar
 
Join Date: Feb 2007
Location: Internet
Posts: 131
Member: 444091
Status: Offline
Thanks Meter: 21
Please run selftest 1st. Before take any action
  Reply With Quote
Old 01-31-2009, 06:46   #9 (permalink)
No Life Poster
 
metro2mobile's Avatar
 
Join Date: May 2007
Posts: 1,181
Member: 515972
Status: Offline
Thanks Meter: 526
brother first full erase flas

then write flas

backup restore

wirite pm use sx4

filesystem format

factory set

unlock

now your fone is ok
  Reply With Quote
Old 01-31-2009, 06:54   #10 (permalink)
Registered User
 
Join Date: Aug 2008
Location: Indonesia
Posts: 196
Member: 828691
Status: Offline
Thanks Meter: 33
bro please unlock by bb5 king or mt box.
  Reply With Quote
Old 02-03-2009, 17:45   #11 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 40
Posts: 9,816
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,603
Quote:
Originally Posted by kokono_nj View Post
you erase full flash and write full + pm ok = money
ps: backup rpl and 308pm
Quote:
Originally Posted by milkyctg View Post
Replace the retu with a genuine one. Reflow hot air on Rap.
Quote:
Originally Posted by turan alom View Post
kokono_nj HE IS RIGHT


this way go to success

write full flash cmpleat
restore backup rpl and (308pm or)

modify pm with sx4

other ways usb flash compleat
Quote:
Originally Posted by RD7 View Post
Please run selftest 1st. Before take any action
Quote:
Originally Posted by metro2mobile View Post
brother first full erase flas

then write flas

backup restore

wirite pm use sx4

filesystem format

factory set

unlock

now your fone is ok
Quote:
Originally Posted by xEDIx View Post
bro please unlock by bb5 king or mt box.


thanx mates for ur replies.. phone is now working fine except charging..

"charger not supported"

now i m waiting for ur experiences...


phone info...

Code:
Powering the phone...
Reading...
MCU SW version: V 07.21
05-11-08
RM-217
(c) Nokia.           
PCI version: 
RFIC version: 	17211721
DSP version: 
ICPR61_08w10
PPM version: V 07.21
05-11-08
RM-217
(c) Nokia.           
C
BT MCM version: 06cc-P9.1
Retu version: 32
Tahvo version: 53
Content Pack version: Content: c
V 07.21
05-11-08
RM-217
(c) Nokia.           

Production serial number: 
Product code: 
Module code: 
Basic production code: 
Flash code: 
Order number: 
Product specific data: 
Long production SN: 
ATO: 
Default SN type: 
IMEI plain: 3595XXXXXXXXXXXX112
IMEI spare to net: 3A 95 45 04 21 07 10 01 
IMEI SV to net: 33 95 45 04 21 07 10 21 F5 

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-217.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\

Searching for default location of ini...
Checking path: \Products\RM-217\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Done!
thanx alot...
  Reply With Quote
Old 02-03-2009, 18:03   #12 (permalink)
Freak Poster
 
Join Date: Mar 2004
Posts: 172
Member: 59441
Status: Offline
Thanks Meter: 9
download good PM and write,it will charge again and you will not get the "Charger not supported message"
  Reply With Quote
Old 03-28-2009, 15:12   #13 (permalink)
No Life Poster
 
mcclinic's Avatar
 
Join Date: Sep 2007
Location: Earth
Posts: 902
Member: 593876
Status: Offline
Thanks Meter: 302
Quote:
Originally Posted by LoveLess View Post
thanx mates for ur replies.. phone is now working fine except charging..

"charger not supported"

now i m waiting for ur experiences...


phone info...

Code:
Powering the phone...
Reading...
MCU SW version: V 07.21
05-11-08
RM-217
(c) Nokia.           
PCI version: 
RFIC version:     17211721
DSP version: 
ICPR61_08w10
PPM version: V 07.21
05-11-08
RM-217
(c) Nokia.           
C
BT MCM version: 06cc-P9.1
Retu version: 32
Tahvo version: 53
Content Pack version: Content: c
V 07.21
05-11-08
RM-217
(c) Nokia.           

Production serial number: 
Product code: 
Module code: 
Basic production code: 
Flash code: 
Order number: 
Product specific data: 
Long production SN: 
ATO: 
Default SN type: 
IMEI plain: 3595XXXXXXXXXXXX112
IMEI spare to net: 3A 95 45 04 21 07 10 01 
IMEI SV to net: 33 95 45 04 21 07 10 21 F5 

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-217.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\

Searching for default location of ini...
Checking path: \Products\RM-217\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Done!
thanx alot...
How to solved ur problem please share here thanks!!!.
  Reply With Quote
Old 03-29-2009, 18:37   #14 (permalink)
Junior Member
 
Join Date: Mar 2008
Posts: 31
Member: 729525
Status: Offline
Thanks Meter: 2
Quote:
Originally Posted by LoveLess View Post
thanx mates for ur replies.. phone is now working fine except charging..

"charger not supported"

now i m waiting for ur experiences...


phone info...

Code:
Powering the phone...
Reading...
MCU SW version: V 07.21
05-11-08
RM-217
(c) Nokia.           
PCI version: 
RFIC version:     17211721
DSP version: 
ICPR61_08w10
PPM version: V 07.21
05-11-08
RM-217
(c) Nokia.           
C
BT MCM version: 06cc-P9.1
Retu version: 32
Tahvo version: 53
Content Pack version: Content: c
V 07.21
05-11-08
RM-217
(c) Nokia.           

Production serial number: 
Product code: 
Module code: 
Basic production code: 
Flash code: 
Order number: 
Product specific data: 
Long production SN: 
ATO: 
Default SN type: 
IMEI plain: 3595XXXXXXXXXXXX112
IMEI spare to net: 3A 95 45 04 21 07 10 01 
IMEI SV to net: 33 95 45 04 21 07 10 21 F5 

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-217.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\

Searching for default location of ini...
Checking path: \Products\RM-217\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Done!
thanx alot...

what trik do u used to make phone work?
please share here.coz i got the same problem. thx
  Reply With Quote
Old 03-29-2009, 20:14   #15 (permalink)
Junior Member
 
Join Date: Oct 2005
Posts: 31
Member: 192672
Status: Offline
Thanks Meter: 9
charger not support is the hardware issue.. just change 1 resistor below the sim tray .. will definately solve the problem
  Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
6300 contact service after unlocking with bb5 box 4 u man BB5BOX 11 10-28-2007 00:15
nokia 6300 contact service after rpls 4 u man Nokia Base Band 5 ( BB-5 ) 0 10-11-2007 10:51
6300 contact service after flash tririval MT-BOX 3 08-16-2007 16:15

 



All times are GMT +1. The time now is 09:05.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.30801 seconds with 10 queries

SEO by vBSEO