6300 gallery open restarting?
 

i flashed that one erase flash i did but problem same

post log bro...............................:eek:

here the logs..............



MCU SW version: V 07.21
05-11-08
RM-217
(c) Nokia.
HW version: 1000
PCI version:
RFIC version:  17211721
DSP version: 
ICPR61_08w10
PPM version: V 07.21
05-11-08
RM-217
(c) Nokia.
F
BT MCM version: 06cc-P9.1
Retu version: 32
Tahvo version: 53
Production serial number: DEE776212
Product code: 0546632
Module code: 0203166
Basic production code: 0537040
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 356401011462041
IMEI spare to net: 3A 65 04 01 11 64 02 04
IMEI SV to net: 33 65 04 01 11 64 02 24 F5

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

self test result here....

flash with update firmwere 7.30......................
here is file link: http://www.4shared.com/file/11115510...ailash_gm.html

you put last flash version and change product code


mcu
ppm
cnt



and when flash process finish ..... make factory settings



B.R

why to change product code ,what is the use product code

problem not solved.................still restarting

bro,i think CONFIG KEY damaged restart resons
try to upload pm via sx4 then check
postresult

write a good pm by sx4.............

flash it by hwk or ub with latest ver.i hope you can solve it