6600 contact retailer - GSM-Forum

malek45 · 12-26-2006, 12:55

i have one 6600 with a stange probleme
when i flash it all erase and flash passed perfectly
when i power it show contact retailer
when format it manualy go to ~35% and power off
i try to hot ram and upp and same problem

any one can help me ????????
any solution for this ?????????
thanks

meet_2007 · 12-26-2006, 13:09

first check ur phone turn off in 30 seconds or not if yes then change UIM
next check ur IMEI if it shows ??????????????? then it u can use griffin log file to rebuild ur IMEI
Thanks

puneet14884 · 12-26-2006, 14:25

replace boot ic & try format....luck bro

puneet14884 · 12-26-2006, 14:27

replace boot ic & then try format....luck bro

Vijendra Saini · 12-26-2006, 19:53

1. Select the MCU and PPM file, speed choose “Normal”
2. Press “Start” Button to do the job
3. When the flashing done, choose “Normal” in UI Setting, after that can see the “Init Normal Mode OK” in the software.
4. Choose “Local” in UI Setting, after that can see the “Init Local Mode OK” in the software.
5. Press the “Format User Area” Button, after that can see the “User Area Format OK” in the software.
6. Done
If ur problem is not solved by that then thats a boot ic problem

tampi · 12-26-2006, 20:44

Quote:

Originally Posted by vijendrasaini

1. Select the MCU and PPM file, speed choose “Normal”
2. Press “Start” Button to do the job
3. When the flashing done, choose “Normal” in UI Setting, after that can see the “Init Normal Mode OK” in the software.
4. Choose “Local” in UI Setting, after that can see the “Init Local Mode OK” in the software.
5. Press the “Format User Area” Button, after that can see the “User Area Format OK” in the software.
6. Done
If ur problem is not solved by that then thats a boot ic problem

pls tell me which one is boot ic?

wina rahman · 12-30-2006, 04:35

Quote:

Originally Posted by meet_2007

first check ur phone turn off in 30 seconds or not if yes then change UIM
next check ur IMEI if it shows ??????????????? then it u can use griffin log file to rebuild ur IMEI
Thanks

that"s right..

..if ur phone not turn off in 30 seconds u can format with *+3+send+on/off

.:KHALIFA:. · 12-30-2006, 20:29

change boot ic.... thats it

pdapower · 12-30-2006, 20:39

Quote:

Originally Posted by tampi

pls tell me which one is boot ic?

jst reball tese two ics or change them one by one and flash the set again it will work 100 %

12-26-2006, 12:55	#1 (permalink)
malek45 Freak Poster Join Date: Jun 2003 Location: tunisia - sousse Age: 45 Posts: 214 Member: 32529 Status: Offline Thanks Meter: 23	6600 contact retailer i have one 6600 with a stange probleme when i flash it all erase and flash passed perfectly when i power it show contact retailer when format it manualy go to ~35% and power off i try to hot ram and upp and same problem any one can help me ???????? any solution for this ????????? thanks

12-26-2006, 13:09	#2 (permalink)
meet_2007 Junior Member Join Date: Dec 2006 Posts: 18 Member: 418843 Status: Offline Thanks Meter: 1	6600 contact retailer first check ur phone turn off in 30 seconds or not if yes then change UIM next check ur IMEI if it shows ??????????????? then it u can use griffin log file to rebuild ur IMEI Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6600 contact retailer after flahing with ufs2..?	sudeeshveekey	UFS2 + UFS3-Tornadoflasher	8	12-14-2004 21:45
6600 contact retailer ( i need to save contacts )	CMV_2K	WD2 & APE (Symbian Phones)	2	11-01-2004 08:43
6600 contact retailer	Geni	Griffin	10	05-23-2004 14:54
6600 Contact Retailer	SKYPHONE	WD2 & APE (Symbian Phones)	5	01-03-2004 18:35

12-26-2006, 14:25	#3 (permalink)
puneet14884 No Life Poster Join Date: Nov 2006 Location: guangzhou,CHINA & delhi,INDIA Posts: 569 Member: 399779 Status: Offline Thanks Meter: 125	replace boot ic & try format....luck bro

12-26-2006, 14:27	#4 (permalink)
puneet14884 No Life Poster Join Date: Nov 2006 Location: guangzhou,CHINA & delhi,INDIA Posts: 569 Member: 399779 Status: Offline Thanks Meter: 125	replace boot ic & then try format....luck bro

12-26-2006, 19:53	#5 (permalink)
Vijendra Saini No Life Poster Join Date: Nov 2006 Location: Back after long time :-) Age: 40 Posts: 4,397 Member: 398557 Status: Offline Sonork: 100.1578489 Thanks Meter: 1,516	1. Select the MCU and PPM file, speed choose “Normal” 2. Press “Start” Button to do the job 3. When the flashing done, choose “Normal” in UI Setting, after that can see the “Init Normal Mode OK” in the software. 4. Choose “Local” in UI Setting, after that can see the “Init Local Mode OK” in the software. 5. Press the “Format User Area” Button, after that can see the “User Area Format OK” in the software. 6. Done If ur problem is not solved by that then thats a boot ic problem

12-30-2006, 20:29	#8 (permalink)
.:KHALIFA:. No Life Poster Join Date: May 2006 Location: U wont beleive Age: 43 Posts: 1,293 Member: 275631 Status: Offline Thanks Meter: 408	change boot ic.... thats it