6600 White Screen Solution Is Here - GSM-Forum

Javajohn · 01-05-2006, 22:28

6600 when on it jst white screen phone cannot funtion
here is the solution just replace this ic

uwenk98 · 01-07-2006, 22:12

@Javajohn

I HAVE TWO 6600 WITH BLANK SCREEN BUT HAVE A DIFERENT CONDITIONS,

- WHEN PRESSING POWER ON BUTTON LCD LED AND KEYPAD LED IS TURN ON AFTER SECOND KEYPAD LED TURN OFF,BUT NO HAVE NOKIA LOGO ON THE SCREEN AND AFTER 15 SECOND LCD LED TURN OFF WITH POWER OFF PHONE TOO.

- WHEN PRESSING POWER ON BUTTON LCD AND KEYPAD LED TURN ON BUT AFTER SECOND KEYPAD LED STILL TURN ON AND AFTER MINUTE PHONE TURN OFF BY SELF.

Did your solutions work for my phone.........?????

regards

Javajohn · 01-07-2006, 22:57

Ya Its Work But Please First Check That The Phone Goes Normal Mode Ok On Cable Or Not

@
.:Javajohn:.
MOBILEWALA TEAM

ahkhoo76 · 01-08-2006, 11:04

I read somewhere in China site regarding with the problem below it was the 32.768khz crystal faulty.Please post if u success.

"WHEN PRESSING POWER ON BUTTON LCD LED AND KEYPAD LED IS TURN ON AFTER SECOND KEYPAD LED TURN OFF,BUT NO HAVE NOKIA LOGO ON THE SCREEN AND AFTER 15 SECOND LCD LED TURN OFF WITH POWER OFF PHONE TOO"

Javajohn · 01-08-2006, 12:30

ya u r right man but not in 6600 its for 3650 only

ahkhoo76 · 01-09-2006, 08:33

Javajohn,thanks for your info.

Lucky Titico · 01-09-2006, 10:32

boz any solution? the phone cant make a call, only white screen...lcd connectiuon ok.....

GSM WIZARD · 01-09-2006, 16:48

how about a blinking phone.i have done everything in hardware but still blinking.any help?

amekawy · 01-09-2006, 21:25

thanks very much
it is good works

Javajohn · 01-09-2006, 21:25

FOR BLINKING U HAVE TO DO IT IN SOFTWARE MAN

.:Javajohn:.
MOBILEWALA TEAM

uwenk98 · 01-10-2006, 09:20

Quote:

Originally Posted by .:Javajohn:.

Ya Its Work But Please First Check That The Phone Goes Normal Mode Ok On Cable Or Not

@
.:Javajohn:.
MOBILEWALA TEAM

In My case UFS and Jaf said local mode failed........

Javajohn · 01-10-2006, 10:56

FOR THAT ALSO U HAVE TO DO THIS SOLUTION ITS ALSO WORKS FOR LOCAL MODE FAIL

.:JAVAJOHN:.
MOBILEWALA TEAM

glenntelecom · 01-11-2006, 07:08

i have a problem on nokia 6600.the contidion is white screen but when i connect it to twister with any button click the nokia appear and after that i remove the phone from the cable and try the phone is ok but when i off the phone and power it on again the problem is still the same white screen again.when i connect to the cabble the phone will nokia boot again and i try to use it its ok.please help me what to do

goffaman · 01-11-2006, 10:19

Quote:

Originally Posted by glenntelecom

i have a problem on nokia 6600.the contidion is white screen but when i connect it to twister with any button click the nokia appear and after that i remove the phone from the cable and try the phone is ok but when i off the phone and power it on again the problem is still the same white screen again.when i connect to the cabble the phone will nokia boot again and i try to use it its ok.please help me what to do

try flashing it.. or check with good lcd first... or change the display driver ic.... post result please..

goffaman · 01-12-2006, 02:37

Quote:

Originally Posted by ahkhoo76

I read somewhere in China site regarding with the problem below it was the 32.768khz crystal faulty.Please post if u success.
"WHEN PRESSING POWER ON BUTTON LCD LED AND KEYPAD LED IS TURN ON AFTER SECOND KEYPAD LED TURN OFF,BUT NO HAVE NOKIA LOGO ON THE SCREEN AND AFTER 15 SECOND LCD LED TURN OFF WITH POWER OFF PHONE TOO"

guys i repaired this kind of problem, i did replace UPP.. first i did try replacing ROM3 and 4 but nothing happened. i returned back the flash ic's and replaced UPP. at first flashing it shows contact retailer and just manual format it.. problem solved

01-05-2006, 22:28	#1 (permalink)
Javajohn No Life Poster Join Date: Mar 2005 Location: Facebook: Java John Age: 43 Posts: 5,147 Member: 122246 Status: Offline Sonork: 100.50000 Thanks Meter: 4,993	6600 White Screen Solution Is Here 6600 when on it jst white screen phone cannot funtion here is the solution just replace this ic

01-07-2006, 22:57	#3 (permalink)
Javajohn No Life Poster Join Date: Mar 2005 Location: Facebook: Java John Age: 43 Posts: 5,147 Member: 122246 Status: Offline Sonork: 100.50000 Thanks Meter: 4,993	Ya Its Work But Please First Check That The Phone Goes Normal Mode Ok On Cable Or Not @ .:Javajohn:. MOBILEWALA TEAM Last edited by Javajohn; 01-09-2006 at 21:23.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 6600 white screen solution needed	khalidsain	Nokia Hardware & Hardware Repair	5	06-02-2014 19:31
China Phones Restart/ Dead/insert Sim/bluetooth/ Keypad/white Screen Solutions R Here	ashok_kumar459	Infinity-Box	16	10-10-2012 03:56
i need 6600 white screen solution	tiju kkm	Nokia Hardware & Hardware Repair	2	11-28-2008 00:20
6600 white screen solution	actionmobile	WD2 & APE (Symbian Phones)	2	09-01-2008 23:07

01-07-2006, 22:12	#2 (permalink)
uwenk98 No Life Poster Join Date: Oct 2002 Location: gold land Age: 46 Posts: 564 Member: 16904 Status: Offline Thanks Meter: 9	@Javajohn I HAVE TWO 6600 WITH BLANK SCREEN BUT HAVE A DIFERENT CONDITIONS, - WHEN PRESSING POWER ON BUTTON LCD LED AND KEYPAD LED IS TURN ON AFTER SECOND KEYPAD LED TURN OFF,BUT NO HAVE NOKIA LOGO ON THE SCREEN AND AFTER 15 SECOND LCD LED TURN OFF WITH POWER OFF PHONE TOO. - WHEN PRESSING POWER ON BUTTON LCD AND KEYPAD LED TURN ON BUT AFTER SECOND KEYPAD LED STILL TURN ON AND AFTER MINUTE PHONE TURN OFF BY SELF. Did your solutions work for my phone.........????? regards

01-08-2006, 11:04	#4 (permalink)
ahkhoo76 Insane Poster Join Date: Jul 2003 Posts: 88 Member: 33029 Status: Offline Thanks Meter: 9	I read somewhere in China site regarding with the problem below it was the 32.768khz crystal faulty.Please post if u success. "WHEN PRESSING POWER ON BUTTON LCD LED AND KEYPAD LED IS TURN ON AFTER SECOND KEYPAD LED TURN OFF,BUT NO HAVE NOKIA LOGO ON THE SCREEN AND AFTER 15 SECOND LCD LED TURN OFF WITH POWER OFF PHONE TOO"

01-08-2006, 12:30	#5 (permalink)
Javajohn No Life Poster Join Date: Mar 2005 Location: Facebook: Java John Age: 43 Posts: 5,147 Member: 122246 Status: Offline Sonork: 100.50000 Thanks Meter: 4,993	ya u r right man but not in 6600 its for 3650 only

01-09-2006, 08:33	#6 (permalink)
ahkhoo76 Insane Poster Join Date: Jul 2003 Posts: 88 Member: 33029 Status: Offline Thanks Meter: 9	Javajohn,thanks for your info.

01-09-2006, 10:32	#7 (permalink)
Lucky Titico Freak Poster Join Date: Feb 2004 Location: Moon Age: 50 Posts: 279 Member: 55357 Status: Offline Thanks Meter: 12	boz any solution? the phone cant make a call, only white screen...lcd connectiuon ok.....

01-09-2006, 16:48	#8 (permalink)
GSM WIZARD Freak Poster Join Date: Jan 2006 Location: mars under soft & hardware.... Posts: 237 Member: 217604 Status: Offline Thanks Meter: 12	how about a blinking phone.i have done everything in hardware but still blinking.any help?

01-09-2006, 21:25	#9 (permalink)
amekawy Junior Member Join Date: Oct 2005 Age: 43 Posts: 24 Member: 187930 Status: Offline Thanks Meter: 1	thanks very much it is good works

01-09-2006, 21:25	#10 (permalink)
Javajohn No Life Poster Join Date: Mar 2005 Location: Facebook: Java John Age: 43 Posts: 5,147 Member: 122246 Status: Offline Sonork: 100.50000 Thanks Meter: 4,993	FOR BLINKING U HAVE TO DO IT IN SOFTWARE MAN .:Javajohn:. MOBILEWALA TEAM

01-10-2006, 10:56	#12 (permalink)
Javajohn No Life Poster Join Date: Mar 2005 Location: Facebook: Java John Age: 43 Posts: 5,147 Member: 122246 Status: Offline Sonork: 100.50000 Thanks Meter: 4,993	FOR THAT ALSO U HAVE TO DO THIS SOLUTION ITS ALSO WORKS FOR LOCAL MODE FAIL .:JAVAJOHN:. MOBILEWALA TEAM

01-11-2006, 07:08	#13 (permalink)
glenntelecom Registered User Join Date: Oct 2005 Posts: 319 Member: 195513 Status: Offline Thanks Meter: 67	i have a problem on nokia 6600.the contidion is white screen but when i connect it to twister with any button click the nokia appear and after that i remove the phone from the cable and try the phone is ok but when i off the phone and power it on again the problem is still the same white screen again.when i connect to the cabble the phone will nokia boot again and i try to use it its ok.please help me what to do