6610 Key Pad - GSM-Forum

cellularry · 11-11-2004, 14:59

6610 no response from keypad. no phisical water damage is shown on the board.
Any suggestions please?
thx

shawgsm · 11-11-2004, 15:13

flash the phone or check ui board or replace ui.hope this could help

mohammed · 11-12-2004, 00:36

hi
before u decide to CHANGE anything

check for short at side volume button
then Procede to

a: interboard conector n ui board
b: Check matrix<small grey/silverish>
c: Direct UPP problem,check for cut lines

hope this can solve it

M@RTY · 11-12-2004, 01:23

Quote:

Originally Posted by cellularry

6610 no response from keypad. no phisical water damage is shown on the board.
Any suggestions please?
thx

Hi

Reflow/Replace Z300 keyboard EMI filter

B.R

M@RTY

354boyo · 03-25-2005, 12:35

i found this problem too, but after replace Z300, keypad still no respond, how to solve the problem?
BTW i replace upp, switch volume.
Plz somebody give me explanation for this,

ea12345 · 03-25-2005, 20:38

replace volume sw down side or check without sw i repair many phones. Please do this

Unggul · 03-25-2005, 22:27

yes it's usualy short in volume button ? but if still try to flash the phone.

BR
Unggul

11-11-2004, 14:59	#1 (permalink)
cellularry No Life Poster Join Date: Oct 2003 Location: Lebanon / Nigeria Age: 52 Posts: 1,085 Member: 42276 Status: Offline Thanks Meter: 47	6610 Key Pad 6610 no response from keypad. no phisical water damage is shown on the board. Any suggestions please? thx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
w550i,the 2,8,# not working.. changed 3 key pad ic,, key pad noww what to do???	broken_rules	Sony Ericsson Hardware Repair	2	03-20-2009 15:44
6610 key pad probs	jaffar_ahamed	Nokia Digital Core Technology 4 ( DCT-4 )	0	05-18-2007 09:33
6610 no display and key pad lights	tajinder	Nokia Hardware & Hardware Repair	0	02-17-2006 17:09
T-230 Mick Not Working & YES key on Key Pad	saifimughal	Sony Ericsson Hardware Repair	2	10-15-2005 20:20
6610 UPP pads unstuk ...	cniky	Nokia Hardware & Hardware Repair	1	03-14-2004 21:30

11-11-2004, 15:13	#2 (permalink)
shawgsm No Life Poster Join Date: Jan 2004 Location: United States Posts: 1,988 Member: 51453 Status: Offline Thanks Meter: 729	flash the phone or check ui board or replace ui.hope this could help

11-12-2004, 00:36	#3 (permalink)
mohammed No Life Poster Join Date: Sep 2002 Location: max232 chip Posts: 690 Member: 16036 Status: Offline Thanks Meter: 5	hi before u decide to CHANGE anything check for short at side volume button then Procede to a: interboard conector n ui board b: Check matrix<small grey/silverish> c: Direct UPP problem,check for cut lines hope this can solve it

03-25-2005, 12:35	#5 (permalink)
354boyo Freak Poster Join Date: May 2004 Location: kediri Age: 46 Posts: 141 Member: 65714 Status: Offline Thanks Meter: 17	i found this problem too, but after replace Z300, keypad still no respond, how to solve the problem? BTW i replace upp, switch volume. Plz somebody give me explanation for this,

03-25-2005, 20:38	#6 (permalink)
ea12345 Freak Poster Join Date: Mar 2005 Location: GSM Age: 50 Posts: 164 Member: 130345 Status: Offline Thanks Meter: 10	replace volume sw down side or check without sw i repair many phones. Please do this

03-25-2005, 22:27	#7 (permalink)
Unggul No Life Poster Join Date: Jul 2004 Location: Bandung - West Java, Indonesia Age: 43 Posts: 501 Member: 71273 Status: Offline Thanks Meter: 14	yes it's usualy short in volume button ? but if still try to flash the phone. BR Unggul