6610 keybord no function - GSM-Forum

desmond2727 · 03-28-2005, 12:13

i have one 6610 kebord ,send n end no function

i alredy replace the keypad ic but same problem got any solution?
help....

adilusta · 03-28-2005, 13:19

Quote:

Originally Posted by desmond2727

i have one 6610 kebord ,send n end no function

i alredy replace the keypad ic but same problem got any solution?
help....

volume keys short period pssible

control

desmond2727 · 03-28-2005, 14:55

do alredy.....same still no work.....

GSM_LORD · 03-28-2005, 15:07

thats right.. if one of volume keys is damaged that may cause a freeze in the keypad.

also u must check the connector itself and the ESD filter .. if all r OK then the problem is at UPP

MAJESTIC PIRATE · 03-28-2005, 17:19

yes . sure . try and replace volume keys , if not replace keypad ic control , if not reball or replace the UEM .................

03-28-2005, 12:13	#1 (permalink)
desmond2727 Freak Poster Join Date: Mar 2004 Age: 47 Posts: 388 Member: 58704 Status: Offline Sonork: 100.1618753 Thanks Meter: 43	6610 keybord no function i have one 6610 kebord ,send n end no function i alredy replace the keypad ic but same problem got any solution? help....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NOkia 6610 " No Charging"	sonu_nigam	Nokia Hardware & Hardware Repair	8	01-22-2008 04:41
K750I keybord no fonction after flash	sofigsm	Sony Ericsson	0	07-28-2006 18:23
6610 with no network problem	mobilemafia	Nokia Hardware & Hardware Repair	2	08-14-2003 22:35
Siemens C30 mic no function.	acyl2000	Siemens Hardware Repair Area	1	10-20-2002 03:48
No function after flashing Neptun K09	freetalk	Mitsubishi	0	12-22-2001 21:17

03-28-2005, 14:55	#3 (permalink)
desmond2727 Freak Poster Join Date: Mar 2004 Age: 47 Posts: 388 Member: 58704 Status: Offline Sonork: 100.1618753 Thanks Meter: 43	do alredy.....same still no work.....

03-28-2005, 15:07	#4 (permalink)
GSM_LORD Freak Poster Join Date: Feb 2005 Age: 46 Posts: 180 Member: 116891 Status: Offline Thanks Meter: 15	thats right.. if one of volume keys is damaged that may cause a freeze in the keypad. also u must check the connector itself and the ESD filter .. if all r OK then the problem is at UPP

03-28-2005, 17:19	#5 (permalink)
MAJESTIC PIRATE Freak Poster Join Date: Dec 2003 Location: E G Y P T Age: 47 Posts: 336 Member: 45635 Status: Offline Thanks Meter: 20	yes . sure . try and replace volume keys , if not replace keypad ic control , if not reball or replace the UEM .................