7210c Contact service - GSM-Forum

farihabest · 08-10-2009, 05:17

There is a unite of 7210c that make sound on startup but contactservice.
Imei is okey

Please post tested solution here and also tell with what flasher(box) should be flashed?

farihabest · 08-10-2009, 05:51

this is the log of the phone:

MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Initializing phone...
Output power at Line1 3.92V is in range of: 4.00V ±10.0%
Phone powered.
Reading Info...
Soft Version: V 05.21 Date: 20-10-08 Type: RM-436 (7210C/7212C) Pack: (c) Nokia
Product code: 0566902
Product code: 0563951
Radio: GSM900 / GSM1800 / GSM1900
Original IMEI: 359310-02-********
Production serial: DTD064119
HW Version: 1001
DSP Version: ICPR72_08w37
LCD Version: SHARP
APE ADSP Version:
SIMLock service: SIMLOCK SERVER [01000B07091C]
Profile bits: 0000000000000000
Simlock config: 2440700000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Open; Data: FFFFFF
Block: 2; Lock: 1; State: Open; Data: FFFFFF
Block: 3; Lock: 1; State: Open; Data: FFFFFF
Block: 4; Lock: 1; State: Open; Data: FFFFFF
Block: 5; Lock: 1; State: Open; Data: FFFFFF
Block: 6; Lock: 1; State: Open; Data: FFFFFF
Block: 7; Lock: 1; State: Open; Data: FFFFFF
All locks are open.
--------------------------------------------------------------------------------
TBB5ReadInfoThread 2.7.8.2174 finished at: 2009/08/09 21:48:32

Done.

Maiwand khan · 08-10-2009, 06:10

first of all format ur phone
if still CS than flash with JAF
if still CS than write modified pm with sx4 by mt box or Genie universal

best regard
Maiwand Stanikzi

cel_phon · 08-10-2009, 06:37

restore original backup

metro2mobile · 08-10-2009, 07:10

yes restore original backup

then not ok write pm use sx4

dabing · 08-10-2009, 07:13

reflash your phone in jaf,

soshan · 08-10-2009, 07:59

sx4 & writting fullpm............

shohag.bd · 08-11-2009, 05:33

try sx4 with mx-key...

him82 · 08-11-2009, 06:00

7210c flash file site bookmark pls given me

him82 · 08-11-2009, 06:03

7210c con service pls give me flash file site ,with jaf

haji rahim · 08-11-2009, 07:45

try to use mt-box for writing pm with sx4 ...... if says check securty then ur problem will slove by new RPL

topnet · 08-11-2009, 08:05

Sx4+pm+sx4 .................

farihabest · 08-12-2009, 03:37

thanks to all brother..I shall try

totalmanish · 08-12-2009, 06:40

100% rpl problem just get new one ur problem will be solved..

lallyviji · 03-19-2010, 07:11

7210c contact service try in mx-key sx4auth and right Modified pm 100% ok that porblam

08-10-2009, 05:17	#1 (permalink)
farihabest No Life Poster Join Date: Oct 2007 Location: MX-Key and me ...The Best Posts: 798 Member: 617692 Status: Offline Thanks Meter: 306	7210c Contact service There is a unite of 7210c that make sound on startup but contactservice. Imei is okey Please post tested solution here and also tell with what flasher(box) should be flashed?

08-11-2009, 06:03	#10 (permalink)
him82 No Life Poster Join Date: Dec 2007 Location: DHARAMPUR<GUJRAT>INDIA Posts: 899 Member: 646646 Status: Offline Sonork: 100.1664464 Thanks Meter: 240	7210c in contact sevice pls giiven solution 7210c con service pls give me flash file site ,with jaf

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 7210c contact service	NIMESHFONOTLY	Nokia Hardware & Hardware Repair	78	08-23-2012 13:31
7210c contact service plz hlp	fofolpo	Nokia Base Band 5 ( BB-5 )	2	04-02-2009 09:41

08-10-2009, 05:51	#2 (permalink)
farihabest No Life Poster Join Date: Oct 2007 Location: MX-Key and me ...The Best Posts: 798 Member: 617692 Status: Offline Thanks Meter: 306	this is the log of the phone: MCU Nokia Version: 1.126, and up to date. SMCU Nokia Version: 1.44, and up to date. Initializing phone... Output power at Line1 3.92V is in range of: 4.00V ±10.0% Phone powered. Reading Info... Soft Version: V 05.21 Date: 20-10-08 Type: RM-436 (7210C/7212C) Pack: (c) Nokia Product code: 0566902 Product code: 0563951 Radio: GSM900 / GSM1800 / GSM1900 Original IMEI: 359310-02-******** Production serial: DTD064119 HW Version: 1001 DSP Version: ICPR72_08w37 LCD Version: SHARP APE ADSP Version: SIMLock service: SIMLOCK SERVER [01000B07091C] Profile bits: 0000000000000000 Simlock config: 2440700000000000 Invalid codes entered: 0 / 0 Block: 1; Lock: 1; State: Open; Data: FFFFFF Block: 2; Lock: 1; State: Open; Data: FFFFFF Block: 3; Lock: 1; State: Open; Data: FFFFFF Block: 4; Lock: 1; State: Open; Data: FFFFFF Block: 5; Lock: 1; State: Open; Data: FFFFFF Block: 6; Lock: 1; State: Open; Data: FFFFFF Block: 7; Lock: 1; State: Open; Data: FFFFFF All locks are open. -------------------------------------------------------------------------------- TBB5ReadInfoThread 2.7.8.2174 finished at: 2009/08/09 21:48:32 Done.

08-10-2009, 06:10	#3 (permalink)
Maiwand khan No Life Poster Join Date: Jun 2006 Location: Afghanistan Kabul Posts: 2,196 Member: 295886 Status: Offline Sonork: 100.1583369 Thanks Meter: 1,472	first of all format ur phone if still CS than flash with JAF if still CS than write modified pm with sx4 by mt box or Genie universal best regard Maiwand Stanikzi

08-10-2009, 06:37	#4 (permalink)
cel_phon No Life Poster Join Date: Jan 2009 Location: M_B_Din-PK Posts: 3,979 Member: 950201 Status: Offline Thanks Meter: 1,928	restore original backup

08-10-2009, 07:10	#5 (permalink)
metro2mobile No Life Poster Join Date: May 2007 Posts: 1,181 Member: 515972 Status: Offline Thanks Meter: 526	yes restore original backup then not ok write pm use sx4

08-10-2009, 07:13	#6 (permalink)
dabing No Life Poster Join Date: Sep 2008 Location: The Land Of Promise Posts: 588 Member: 857401 Status: Offline Sonork: 1596086 Thanks Meter: 129	reflash your phone in jaf,

08-10-2009, 07:59	#7 (permalink)
soshan No Life Poster Join Date: Sep 2007 Location: iran-shushtar Posts: 3,552 Member: 592636 Status: Offline Thanks Meter: 674	sx4 & writting fullpm............

08-11-2009, 05:33	#8 (permalink)
shohag.bd Registered User Join Date: Apr 2008 Location: searching new... Posts: 341 Member: 749179 Status: Offline Sonork: 100.1668876 Thanks Meter: 68	try sx4 with mx-key...

08-11-2009, 06:00	#9 (permalink)
him82 No Life Poster Join Date: Dec 2007 Location: DHARAMPUR<GUJRAT>INDIA Posts: 899 Member: 646646 Status: Offline Sonork: 100.1664464 Thanks Meter: 240	7210c flash file site bookmark pls given me

08-11-2009, 07:45	#11 (permalink)
haji rahim No Life Poster Join Date: Mar 2008 Location: RMS- CLUB Posts: 3,364 Member: 723410 Status: Offline Sonork: 📱 100.1592732 Thanks Meter: 3,374	try to use mt-box for writing pm with sx4 ...... if says check securty then ur problem will slove by new RPL

08-11-2009, 08:05	#12 (permalink)
topnet Freak Poster Join Date: Aug 2006 Location: iran-ahwaz Posts: 105 Member: 335912 Status: Offline Thanks Meter: 142	Sx4+pm+sx4 .................

08-12-2009, 03:37	#13 (permalink)
farihabest No Life Poster Join Date: Oct 2007 Location: MX-Key and me ...The Best Posts: 798 Member: 617692 Status: Offline Thanks Meter: 306	thanks to all brother..I shall try

08-12-2009, 06:40	#14 (permalink)
totalmanish Freak Poster Join Date: Aug 2006 Location: akola Posts: 456 Member: 336192 Status: Offline Thanks Meter: 53	100% rpl problem just get new one ur problem will be solved..

03-19-2010, 07:11	#15 (permalink)
lallyviji Freak Poster Join Date: Jun 2008 Location: India,Tamilnadu Age: 36 Posts: 241 Member: 788435 Status: Offline Sonork: 100.1672438 Thanks Meter: 26	7210c contact service try in mx-key sx4auth and right Modified pm 100% ok that porblam