7250 display contacts - GSM-Forum

leosedf · 03-23-2004, 11:24

Hi!
I have one 7250 with the display contacts ripped off along with the pc board pads(only 2 of them remained). Any solution on this would be appreciated
Thank you

Own · 03-25-2004, 08:30

if ripped off ALONG.......
first step please you find schematic diagram for check line from CPU to socket lcd
Br
Own

s4sajii · 04-28-2004, 13:01

Quote:

Originally Posted by leosedf

Hi!
I have one 7250 with the display contacts ripped off along with the pc board pads(only 2 of them remained). Any solution on this would be appreciated
Thank you

i have same prob.. i have found the all most all pins but 2 pins are still left..
now the screen gives only screen light...some one have sechmatics or some thing to help us out..
thanks
br

Raheeeeb · 04-28-2004, 20:10

hi ppl

no need o deal with cpu its clear and near thanks to nokia new dct4 board

photo source reffer o medz my freind

Medz · 04-28-2004, 20:15

Quote:

Originally Posted by raheeeeb

hi ppl

no need o deal with cpu its clear and near thanks to nokia new dct4 board

photo source reffer o medz my freind

Oooo Freind ....

My Regards

s4sajii · 04-29-2004, 05:59

thanks for the pic... but without pin no. 2 and 3 there is no display only light..
just dig the connector a bit and u will find the pins no. 2 and 3... and the display will work.
br

Raheeeeb · 04-29-2004, 06:53

Quote:

Originally Posted by s4sajii

thanks for the pic... but without pin no. 2 and 3 there is no display only light..
just dig the connector a bit and u will find the pins no. 2 and 3... and the display will work.
br

please don't comment without experince see the photo well = befor comment see well

pin 2 is connected to RESX resx RESX
pin 3 is connected to the sda under the switch on and off botton
pin 4 is connected to the sclk under the switch on and off botton

br.

leosedf · 04-29-2004, 13:26

Thank's I'll check it

03-23-2004, 11:24	#1 (permalink)
leosedf No Life Poster Join Date: Jul 2003 Location: Thessaloniki,Hellas Age: 44 Posts: 1,013 Member: 33547 Status: Offline Thanks Meter: 17	7250 display contacts Hi! I have one 7250 with the display contacts ripped off along with the pc board pads(only 2 of them remained). Any solution on this would be appreciated Thank you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7250,7250i contact service	DAVIESON OJO	Nokia Hardware & Hardware Repair	4	11-12-2007 23:41
7250,6610i Contact service	Cobbysyms	Nokia Digital Core Technology 4 ( DCT-4 )	3	09-06-2007 16:28
7250,6610i Contact service	Cobbysyms	Nokia Hardware & Hardware Repair	5	09-05-2007 15:16
7250 display problem	gsm_style	Nokia Hardware & Hardware Repair	10	06-10-2004 10:44
7250 i contact service ı need good pm	kenwood	Nokia Digital Core Technology 4 ( DCT-4 )	5	02-21-2004 13:14

03-25-2004, 08:30	#2 (permalink)
Own No Life Poster Join Date: Aug 2001 Location: Minsk Russia Posts: 915 Member: 5569 Status: Offline Thanks Meter: 10	if ripped off ALONG....... first step please you find schematic diagram for check line from CPU to socket lcd Br Own

04-29-2004, 05:59	#6 (permalink)
s4sajii Banned Join Date: Oct 2001 Location: JMB Age: 49 Posts: 1,226 Member: 6919 Status: Offline Thanks Meter: 12	thanks for the pic... but without pin no. 2 and 3 there is no display only light.. just dig the connector a bit and u will find the pins no. 2 and 3... and the display will work. br

04-29-2004, 13:26	#8 (permalink)
leosedf No Life Poster Join Date: Jul 2003 Location: Thessaloniki,Hellas Age: 44 Posts: 1,013 Member: 33547 Status: Offline Thanks Meter: 17	Thank's I'll check it