7610 flashing ppm failed .... - GSM-Forum

Byte · 08-04-2005, 13:18

Hello all

i get 7610 which contact the retailer problem, after format it , it works for 2 days only , a did format it again and test it , also works for about 3 days, now i reball user flash ic, no when i try to flash it i get flashing ppm error ]

this is what griffin says:

V3.3 BoxID:FF8A
SN: 00000000
ACTIVATED BOX
Product Profile file is: default.pp
using autopower

Initializing Phone...
Flash configuration:
9B0400EC00F8220000110002EC00F822...
Boot and Flash loaders operation took 9.765000 seconds
Erasing - erase took 224.860011 seconds
Flashing MCU - flashing took 324.953015 seconds
Flash configuration:
9B0400EC00F8220000110002EC00F822...
Erasing - erase took 18.546001 seconds
Flashing PPM
02CEA000:00002000, 04Flashing FAILED
Make sure phone is connected and powered!
ErrCodes: [13:FFFFA300]

pls help

pazeth™ · 08-04-2005, 15:08

flash IC problem, you need to change it, if your have ufsx, try to make full erase and flash it without bluetooth flashing

barhoomh · 08-04-2005, 16:00

remove the mark on unabel blutoth flashing and it will be ok

Friendship · 08-04-2005, 18:57

yes ic flash problem

08-04-2005, 13:18	#1 (permalink)
Byte Registered User Join Date: Sep 2003 Location: Palestine Age: 50 Posts: 1,951 Member: 39208 Status: Offline Thanks Meter: 152	7610 flashing ppm failed .... Hello all i get 7610 which contact the retailer problem, after format it , it works for 2 days only , a did format it again and test it , also works for about 3 days, now i reball user flash ic, no when i try to flash it i get flashing ppm error ] this is what griffin says: V3.3 BoxID:FF8A SN: 00000000 ACTIVATED BOX Product Profile file is: default.pp using autopower Initializing Phone... Flash configuration: 9B0400EC00F8220000110002EC00F822... Boot and Flash loaders operation took 9.765000 seconds Erasing - erase took 224.860011 seconds Flashing MCU - flashing took 324.953015 seconds Flash configuration: 9B0400EC00F8220000110002EC00F822... Erasing - erase took 18.546001 seconds Flashing PPM 02CEA000:00002000, 04Flashing FAILED Make sure phone is connected and powered! ErrCodes: [13:FFFFA300] pls help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7610 flashing failed, pls help , its urgent	Jabir27	WD2 & APE (Symbian Phones)	3	06-16-2008 18:43
7610 Flashing Ok-local Mode Failed-dead	zonetrichur	MT-BOX	2	12-07-2006 09:58
7610 Flashing Ok-local Mode Failed-dead	zonetrichur	Nokia Hardware & Hardware Repair	0	12-06-2006 18:23

08-04-2005, 15:08	#2 (permalink)
pazeth™ No Life Poster Join Date: Jul 2004 Location: BANDA ACEH INDONESIA Posts: 1,268 Member: 74519 Status: Offline Thanks Meter: 79	flash IC problem, you need to change it, if your have ufsx, try to make full erase and flash it without bluetooth flashing

08-04-2005, 16:00	#3 (permalink)
barhoomh No Life Poster Join Date: Sep 2004 Location: in somewher in the earth Age: 43 Posts: 746 Member: 82249 Status: Offline Sonork: 100.114416 Thanks Meter: 63	remove the mark on unabel blutoth flashing and it will be ok

08-04-2005, 18:57	#4 (permalink)
Friendship Freak Poster Join Date: Apr 2005 Age: 52 Posts: 150 Member: 141127 Status: Offline Thanks Meter: 6	yes ic flash problem