7610 problem - GSM-Forum

gosev · 07-18-2005, 07:20

Hi...
I have 7610 white screen problem
not detected by pc (UFS3) !!
don't accept flash !!
don't accept erase !!
don't accept format !!
Any experiance for this problem

DrMobile · 07-18-2005, 07:33

Phone maybe WATER DEMAGED or droped.. open phone and check status.. maybe flash IC are demaged.

Br.
A. Wahab

gosev · 07-18-2005, 16:57

Big Thanks To Dr.Mobile. I solved problem. I change flash IC and write new flash with UFS3 and phone work good.

Thanks,

soybean · 01-10-2006, 15:15

I have the same problem with 7610 due to water damage. After dropped into water, I clean it with thinner and after dried, I check with UFS still responsed and can back up PM and re-flash OK but nothing on LCD only noise display. After re-hot the LCD IC filter, the phone became dead only white screen and couldn't detect by UFS. Any Idea what was wrong. I already re-ball the UEME, took out the IC filter for LCD, but the problem still persist.

katdagdagan · 08-17-2006, 11:44

try to re place n130 or n230

invert · 08-18-2006, 04:24

i have a problem 7610 i tried to format the memory card but still it is corrupted i tried also to charge a good memory card same problem also corrupted can any one help me for this problem

Mazahar · 08-18-2006, 05:37

Change memory card interface IC.

soybean · 08-24-2006, 06:29

Quote:

Originally Posted by katdagdagan

try to re place n130 or n230

I've already replace n230, but still ufs boot error upp,3

cocapascola · 09-06-2006, 18:17

i have 7610 and it don't read my memory card
i formated it with same result
i wait the solution please help me

arunrahul · 09-06-2006, 18:33

change the mmc filter

lovermykboy · 09-09-2006, 07:29

Quote:

Originally Posted by DrMobile

Phone maybe WATER DEMAGED or droped.. open phone and check status.. maybe flash IC are demaged.

Br.
A. Wahab

Can u help me dr.mobile for my problem? I have very serious problem about Nokia 7610 LCD line.The two resistos has been cut out or the board has been damage at beside of Lcd board terminal,i have nothing to solder the parts.help me if u have a solution on this problem of mine? tnx.....

07-18-2005, 07:20	#1 (permalink)
gosev Freak Poster Join Date: Mar 2001 Posts: 326 Member: 3691 Status: Offline Thanks Meter: 6	7610 problem Hi... I have 7610 white screen problem not detected by pc (UFS3) !! don't accept flash !! don't accept erase !! don't accept format !! Any experiance for this problem

08-18-2006, 04:24	#6 (permalink)
invert Insane Poster Join Date: Mar 2006 Location: baguio city Posts: 77 Member: 241231 Status: Offline Thanks Meter: 16	7610 memory card corrupted i have a problem 7610 i tried to format the memory card but still it is corrupted i tried also to charge a good memory card same problem also corrupted can any one help me for this problem

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7610 problem with keypad	Junaid_UK	WD2 & APE (Symbian Phones)	13	08-07-2006 10:17
7610 problem	toptro	Twisterflasher	5	02-10-2005 20:29
Nokia 7610 Problem	mtech6928	Nokia Hardware & Hardware Repair	4	12-19-2004 14:07
7610 problem	Teflon Don	Nokia Multimedia	5	10-11-2004 15:41
7610 Problem 4 Blinks !!!	Nizamo	WD2 & APE (Symbian Phones)	10	08-03-2004 16:23

07-18-2005, 07:33	#2 (permalink)
DrMobile No Life Poster Join Date: Aug 2001 Location: P A K I S T A N _____________ Age: 40 Posts: 3,579 Member: 5932 Status: Offline Thanks Meter: 1,694	Phone maybe WATER DEMAGED or droped.. open phone and check status.. maybe flash IC are demaged. Br. A. Wahab

07-18-2005, 16:57	#3 (permalink)
gosev Freak Poster Join Date: Mar 2001 Posts: 326 Member: 3691 Status: Offline Thanks Meter: 6	Big Thanks To Dr.Mobile. I solved problem. I change flash IC and write new flash with UFS3 and phone work good. Thanks,

01-10-2006, 15:15	#4 (permalink)
soybean Freak Poster Join Date: Aug 2004 Posts: 498 Member: 77254 Status: Offline Thanks Meter: 9	I have the same problem with 7610 due to water damage. After dropped into water, I clean it with thinner and after dried, I check with UFS still responsed and can back up PM and re-flash OK but nothing on LCD only noise display. After re-hot the LCD IC filter, the phone became dead only white screen and couldn't detect by UFS. Any Idea what was wrong. I already re-ball the UEME, took out the IC filter for LCD, but the problem still persist.

08-17-2006, 11:44	#5 (permalink)
katdagdagan Junior Member Join Date: Aug 2006 Posts: 9 Member: 332725 Status: Offline Thanks Meter: 1	try to re place n130 or n230

08-18-2006, 05:37	#7 (permalink)
Mazahar Junior Member Join Date: Oct 2005 Posts: 10 Member: 188807 Status: Offline Thanks Meter: 0	Change memory card interface IC.

09-06-2006, 18:17	#9 (permalink)
cocapascola Insane Poster Join Date: Dec 2004 Location: anywhere Age: 43 Posts: 85 Member: 97594 Status: Offline Thanks Meter: 2	i have 7610 and it don't read my memory card i formated it with same result i wait the solution please help me

09-06-2006, 18:33	#10 (permalink)
arunrahul Junior Member Join Date: Aug 2006 Posts: 28 Member: 325669 Status: Offline Thanks Meter: 0	change the mmc filter