7650 flash error - GSM-Forum

sjakie · 08-11-2004, 12:24

MCU flashing - NHL23250.6C1
Sending secondary loader...
Asic: UPP_WD2 v2.0, 2.01, 2.1
FlashID: 89007688
Sending Algorithm...
Success. Performing Authentification...
MSID: 8420D4FE17A07EB17CBB89FDB5
UEM ID: 00 1A 4C C0
Erasing MCU area...
Area: 00000000-0000FFFF
Area: 00010000-00EF9FFF
Area: 00FF0000-00FFC000
MCU area erased.
Writing MCU file...
Unable to flash block: 0x75A24

Is flash broken?

Regards
Sjakie

merulez29 · 08-11-2004, 12:29

Try to reflash, check ur cable connections...

BR

merulez29

sjakie · 08-12-2004, 00:03

Hi, checked cables, should be ok.

Can flash if i skip BT flashing.
Phone is in 4x blinking state.
But cannot format user-Area

Usinjg Prodigy.

Thanks
Sjakie

gsm_style · 09-12-2004, 13:20

i have the same problem, can't flash with neelix, when i put it on only a few black lines at the display, wich hardware part must be change?

btl · 09-12-2004, 14:26

i have this same problem and i have tried all avaliable cablesbut non work

katagsm · 09-12-2004, 14:38

100% is problem with cables, or comunication problem,clean contacts and try with one another cable

BR
katagsm

gsm_style · 09-12-2004, 20:00

i have a new cable, will not work. phone is water dammaged, clean pcb but same problem, erased works but like this

Erasing MCU area...
Area: 00000000-0000FFFF
Area: 00010000-00EF9FFF

thats not good, after erase error message erase time out

gsm_style · 09-15-2004, 03:34

Quote:

Originally Posted by gsm_style

i have a new cable, will not work. phone is water dammaged, clean pcb but same problem, erased works but like this

Erasing MCU area...
Area: 00000000-0000FFFF
Area: 00010000-00EF9FFF

thats not good, after erase error message erase time out

Please read befor you give an answer, you do this all the time, i say water dammaged you come with the reaction, ""maybe set is water damage clean it man"" i have nothing on this answers

Hanukkah · 09-16-2004, 00:24

If water damaged, then you might want to change BT module first before you continue. You said it flashes when you tick skip BT flashing right?

mohammed · 09-16-2004, 01:21

hi guys
according to me

if that little flashing possible
problem SEEMS TO be

"FLASH ROM IS DEAD"

change it n check man

then BiG SQAURE intel have this problem

keep well all
bye

08-11-2004, 12:24	#1 (permalink)
sjakie No Life Poster Join Date: Jan 2000 Location: NL Age: 55 Posts: 1,380 Member: 847 Status: Offline Thanks Meter: 36	7650 flash error MCU flashing - NHL23250.6C1 Sending secondary loader... Asic: UPP_WD2 v2.0, 2.01, 2.1 FlashID: 89007688 Sending Algorithm... Success. Performing Authentification... MSID: 8420D4FE17A07EB17CBB89FDB5 UEM ID: 00 1A 4C C0 Erasing MCU area... Area: 00000000-0000FFFF Area: 00010000-00EF9FFF Area: 00FF0000-00FFC000 MCU area erased. Writing MCU file... Unable to flash block: 0x75A24 Is flash broken? Regards Sjakie

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1650 flash error	nilesh_patel717	Nokia Hardware & Hardware Repair	3	03-29-2010 14:03
7650 IMEI error After flashing	Ikky20022000	UFS2 + UFS3-Tornadoflasher	3	08-17-2004 01:04
Prodigy 7650 Flashing Error!!	Zoio	Federal One	1	01-05-2004 08:24
7650 Mcu error--73	eko	Federal One	0	11-22-2003 15:13
7650 giving error at the end of flashing	kingofhearts	WD2 & APE (Symbian Phones)	2	03-03-2003 16:00

08-11-2004, 12:29	#2 (permalink)
merulez29 Freak Poster Join Date: Apr 2004 Location: Fahad Al Salem, Kuwait Age: 42 Posts: 176 Member: 63385 Status: Offline Thanks Meter: 3	Try to reflash, check ur cable connections... BR merulez29

08-12-2004, 00:03	#3 (permalink)
sjakie No Life Poster Join Date: Jan 2000 Location: NL Age: 55 Posts: 1,380 Member: 847 Status: Offline Thanks Meter: 36	Hi, checked cables, should be ok. Can flash if i skip BT flashing. Phone is in 4x blinking state. But cannot format user-Area Usinjg Prodigy. Thanks Sjakie

09-12-2004, 13:20	#4 (permalink)
gsm_style Freak Poster Join Date: Mar 2003 Location: nederland Age: 52 Posts: 251 Member: 24929 Status: Offline Thanks Meter: 7	i have the same problem, can't flash with neelix, when i put it on only a few black lines at the display, wich hardware part must be change?

09-12-2004, 14:26	#5 (permalink)
btl Banned Join Date: Jan 2004 Age: 32 Posts: 1,319 Member: 50389 Status: Offline Thanks Meter: 36	i have this same problem and i have tried all avaliable cablesbut non work

09-12-2004, 14:38	#6 (permalink)
katagsm Freak Poster Join Date: Jun 2001 Location: ROMANIA Age: 46 Posts: 154 Member: 5021 Status: Offline Thanks Meter: 3	100% is problem with cables, or comunication problem,clean contacts and try with one another cable BR katagsm

09-12-2004, 20:00	#7 (permalink)
gsm_style Freak Poster Join Date: Mar 2003 Location: nederland Age: 52 Posts: 251 Member: 24929 Status: Offline Thanks Meter: 7	i have a new cable, will not work. phone is water dammaged, clean pcb but same problem, erased works but like this Erasing MCU area... Area: 00000000-0000FFFF Area: 00010000-00EF9FFF thats not good, after erase error message erase time out

09-16-2004, 00:24	#9 (permalink)
Hanukkah No Life Poster Join Date: Jul 2001 Location: RP Age: 48 Posts: 890 Member: 5246 Status: Offline Thanks Meter: 9	If water damaged, then you might want to change BT module first before you continue. You said it flashes when you tick skip BT flashing right?

09-16-2004, 01:21	#10 (permalink)
mohammed No Life Poster Join Date: Sep 2002 Location: max232 chip Posts: 690 Member: 16036 Status: Offline Thanks Meter: 5	hi guys according to me if that little flashing possible problem SEEMS TO be "FLASH ROM IS DEAD" change it n check man then BiG SQAURE intel have this problem keep well all bye