8210 contact service - GSM-Forum

emilio · 02-07-2003, 11:49

hi , i have problem with 8210 .
i change cobba , flash phone with full flash and when i update FAID with rolis soft tell me could not get MSID.......

can any help me to solve this problem?

10x advance

kulibin · 02-08-2003, 04:43

May be you bad soldering COBBA, you can EEPROM Tools ----> test what looking you problem

emilio · 02-08-2003, 13:38

I TEST WITH KNOK....... -------> SERIAL TEST COBBA FAILED...

hyper_wamir · 02-08-2003, 16:10

emilio

resolder or change cobba....
are all the pads intact??? check the pads...

br
wamir

emilio · 02-09-2003, 23:27

i make this . all is OK - but my problem is not solved
I get this cobba soder in other 8210 ......work perfect!!!!!

MrCOOL · 02-14-2003, 10:27

just try to reflash again It helped me many times

amir-cairo · 02-20-2003, 03:45

be4 u do any thing run test on eeprom tool or DDP
this programes will tell u where is the faiuler
if just a software broplem flash eeprom and set ID by nokia tool1.9
or reballing yr cobba or changing
good luck

Zoolee · 02-20-2003, 15:01

Run NK_calc press F3 or F1 and check cobba ID. When Id is 000000000... the PCB (under the COBBA ) is bad.

amir-cairo · 02-21-2003, 02:41

priss on self test
u have a list by resson 4 contact service
all is a software broplen else ccont and cobba serial and paralell
hot or reballing it
good luck

02-07-2003, 11:49	#1 (permalink)
emilio No Life Poster Join Date: Oct 2002 Location: Bulgaria, sliven Age: 46 Posts: 615 Member: 16798 Status: Offline Thanks Meter: 3	8210 contact service hi , i have problem with 8210 . i change cobba , flash phone with full flash and when i update FAID with rolis soft tell me could not get MSID....... can any help me to solve this problem? 10x advance

02-21-2003, 02:41	#9 (permalink)
amir-cairo Freak Poster Join Date: May 2002 Location: egypt Age: 46 Posts: 238 Member: 11466 Status: Offline Thanks Meter: 0	if u have a ddp priss on self test u have a list by resson 4 contact service all is a software broplen else ccont and cobba serial and paralell hot or reballing it good luck

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
8210 CONTACT SERVICE SOLUTION	Hams	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-24-2001 17:27
8210 Contact Service	surfer2go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	05-30-2001 00:18
8210 Contact service problem after full flashing	simbirley	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	05-15-2001 13:45
Nokia 8210 Contact service	Henry	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-15-2001 05:06
8210 - Contact Service ?!	Liquid	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-03-2000 12:05

02-08-2003, 04:43	#2 (permalink)
kulibin Freak Poster Join Date: Oct 2002 Age: 41 Posts: 423 Member: 16452 Status: Offline Thanks Meter: 4	May be you bad soldering COBBA, you can EEPROM Tools ----> test what looking you problem

02-08-2003, 13:38	#3 (permalink)
emilio No Life Poster Join Date: Oct 2002 Location: Bulgaria, sliven Age: 46 Posts: 615 Member: 16798 Status: Offline Thanks Meter: 3	I TEST WITH KNOK....... -------> SERIAL TEST COBBA FAILED...

02-08-2003, 16:10	#4 (permalink)
hyper_wamir Freak Poster Join Date: Feb 2002 Location: davao, philippines Age: 43 Posts: 247 Member: 9398 Status: Offline Thanks Meter: 1	emilio resolder or change cobba.... are all the pads intact??? check the pads... br wamir

02-09-2003, 23:27	#5 (permalink)
emilio No Life Poster Join Date: Oct 2002 Location: Bulgaria, sliven Age: 46 Posts: 615 Member: 16798 Status: Offline Thanks Meter: 3	i make this . all is OK - but my problem is not solved I get this cobba soder in other 8210 ......work perfect!!!!!

02-14-2003, 10:27	#6 (permalink)
MrCOOL Crazy Poster Join Date: Jun 2002 Location: somewhere Posts: 56 Member: 12807 Status: Offline Thanks Meter: 0	just try to reflash again It helped me many times

02-20-2003, 03:45	#7 (permalink)
amir-cairo Freak Poster Join Date: May 2002 Location: egypt Age: 46 Posts: 238 Member: 11466 Status: Offline Thanks Meter: 0	be4 u do any thing run test on eeprom tool or DDP this programes will tell u where is the faiuler if just a software broplem flash eeprom and set ID by nokia tool1.9 or reballing yr cobba or changing good luck

02-20-2003, 15:01	#8 (permalink)
Zoolee Freak Poster Join Date: Feb 2003 Location: Miami Posts: 149 Member: 22526 Status: Offline Thanks Meter: 1	Run NK_calc press F3 or F1 and check cobba ID. When Id is 000000000... the PCB (under the COBBA ) is bad.