9500 not booting - GSM-Forum

redmannn · 01-15-2007, 22:43

I have a 9500 that took some water. I don't know exactly how much water. Is not mine so when i get it i sow the connector on the flat cable that connects the two parts is not solder well. so i did it and now the phone works great but the "laptop part" not. when i plug the battery in the big screen became white then appear NOKIA logo for 5-6 seconds i guess, and then dissapear; after 20 more seconds the big screen shuts down and this is all. When i was in soldering process i tested many times to see if works and one time starts the phone and the "laptop part". But now i think is not booting anymore. So i gave a hot air on the ICc maybe i solve the problem; but is the same. So my question is : this phone have somehting special to start up or culd be a sw/hw problem? Any ideas will be great.
Regards.

redmannn · 01-16-2007, 23:33

nobody met this problem yet?

vano23 · 03-28-2007, 00:09

please? if you have? give photo or schematic of the flat cable 9500.

[email protected]

ndagi · 03-29-2007, 19:32

Quote:

Originally Posted by redmannn

nobody met this problem yet?

many of us have come accros this problem mate but, no one has come up with a lasting solution yet! not even nokias service centers! it's an unsolved mystery

p.s ignore replies like use jaf or flash with usb for adsp too etc bla bla bla! it all gonna get u bback to where u started!

do something else mate
regards
ndagi

01-15-2007, 22:43	#1 (permalink)
redmannn Junior Member Join Date: Apr 2004 Age: 41 Posts: 3 Member: 61584 Status: Offline Thanks Meter: 0	9500 not booting I have a 9500 that took some water. I don't know exactly how much water. Is not mine so when i get it i sow the connector on the flat cable that connects the two parts is not solder well. so i did it and now the phone works great but the "laptop part" not. when i plug the battery in the big screen became white then appear NOKIA logo for 5-6 seconds i guess, and then dissapear; after 20 more seconds the big screen shuts down and this is all. When i was in soldering process i tested many times to see if works and one time starts the phone and the "laptop part". But now i think is not booting anymore. So i gave a hot air on the ICc maybe i solve the problem; but is the same. So my question is : this phone have somehting special to start up or culd be a sw/hw problem? Any ideas will be great. Regards.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
w200i not booting, how to boot this model	teamviewer	HWK	6	03-26-2010 12:20
Nokia 6300 1st Boot Err, RAPX NOT BOOTING.."	amit123	Nokia Hardware & Hardware Repair	1	09-18-2009 20:57
9500 not supported by griffin	johnny_liang	Griffin	0	06-15-2005 19:15
9500 mcu boot problem	cs55	Phoenix Black Box	0	03-09-2005 16:31
C35i v18 boot, 10-12-16 not boot :(	Elph	x1x to x45/x50	1	04-06-2001 08:57

01-16-2007, 23:33	#2 (permalink)
redmannn Junior Member Join Date: Apr 2004 Age: 41 Posts: 3 Member: 61584 Status: Offline Thanks Meter: 0	nobody met this problem yet?

03-28-2007, 00:09	#3 (permalink)
vano23 Junior Member Join Date: Sep 2006 Posts: 28 Member: 349443 Status: Offline Thanks Meter: 1	please? if you have? give photo or schematic of the flat cable 9500. [email protected]