dead asha 205 after flash
 

hi

i have nokia asha 205 wich hang on this error them corrupt so i tried to flash it with best infinity but the problem is that the flash hangs on 1% and windows give this error "hardware id missing"

http://www13.0zz0.com/2013/10/10/19/859656535.png

is it harware problem

please help me urgently the client is crying


best regards

try with atf or mxkey
than post result

i will...................

No need to try with any other tool. Set Flash mode settings to dead-Test.
Tick on Back Up. Click on Flash.
This will auto repair Certificates on your mobile. After that Full Flash mobile..

same problem brother...

If so Repair RPL brother..

Post results. if same results,

problem may happen because bad flash chip.
Reheat flash chip carefully.

same problem, ithink thats the flash chip

HARDWARE ID MISSING IS NOT AN ERROR.

JUST CLICK ON BACKUP AND DEAD MODE AND THEN FLASH

JUST FLASH URE PHONE WITH LATEST FILES
ASHA 205 TAKE ABOUT 7-8 MIN TO FLASH
JUST FLASHED ONE ASHA 206 IT TOOK ME 7.21 MIN





WBR
sahil2000ind

thanks for reply brother
for me when flash only ppm it s ok
when flash only cnt it freez on 93% for hours without progress
when flash only mcu it freez on 1% for hours without progress

solved by the new version of best infinity 1.74.5

nokia 205 rm-862
 

http://s30.postimg.org/u9hl65mnx/screenshot_17.jpg
br only mxkey done