help me in my 3220 - GSM-Forum

rajus · 09-04-2007, 10:15

when customer gave me set that time it had writting error then i change flash ic i got erassing error message i thought may be fault in flash ic again i changed new flash ic same error then i take out ic's from 100% ok set i changed all its ic's with the dead one i mean to say flash, uem, upp then it show same error meaasge .below flash id is correct st noname i checked it already before interchanging the ic's

1st Boot Ok, DCT4, UPP: 1130
Fl0: 0x01000000-0x01FFFFFF,00208804,St No Name
Algorithm: u_st_i.fia, Ver: 4.61.0
Algorithm Ok, MSID: 84D8C23A2A86076D493454AF62
Decoded MSID: 3E4EBAE9-005B6CB0-A9000000
Encoded FAID: 2BDD1554-A4E2A7C3-6107949E
Erasing: 0x01820000-0x01A3FFFF ...
Erasing Error: 10, at: 0x01820000-0x0183FFFF, 940207, Time: 00:00
Process Failed, Repowering Mobile

let's we solve this problem together

tahir-khan · 09-04-2007, 10:35

use JAF box + pkey ur problem ll be solve tested by me 100% work just try and post result
Good luck

Regards

xtremeburaq · 09-05-2007, 08:15

USE SAM FLASH IC UR PROBLEM WILL BE DEFINATELY SOLVE. JUST DO IT.

rajus · 09-06-2007, 06:40

Quote:

Originally Posted by xtremeburaq

USE SAM FLASH IC UR PROBLEM WILL BE DEFINATELY SOLVE. JUST DO IT.

THANX ALOT I SOLVE MY PROBLEM BY USING UR DIRECTION.

That'sme · 09-06-2007, 06:48

Just rehot a bit the upp ur problem will be solved.

rajus · 09-06-2007, 08:50

Quote:

Originally Posted by rajus

THANX ALOT I SOLVE MY PROBLEM BY USING UR DIRECTION.

HERE FLASH LOG .BY USING SAM FLASH IC.

1st Boot Ok, DCT4, UPP: 1130
Fl0: 0x01000000-0x01FFFFFF,00EC22F8,Sam K8S2815ETA
Algorithm: u_amd.fia, Ver: 4.52.0
Algorithm Ok, MSID: 84E303560B88A783E491F72BEE
Decoded MSID: 9976BAE9-005B6CB0-A9000000
Encoded FAID: 55BB523A-C7F95F1B-936AA2E8
Area1: 0x01000000-0x0101FFFF Erased, Time: 00:01
Area2: 0x01020000-0x0181FFFF Erased, Time: 01:19
Area3: 0x01E60000-0x01FDFFFF Erased, Time: 00:15
MCU Flashing Completed, Time: 00:52
Chip SECTOR_SIZE: 64k, File FAT_SECTOR_SIZE: 64k
Area1: 0x01A40000-0x01E5FFFF Erased, Time: 00:41
CNT Flashing Completed, Time: 00:14
Running: Nokia File Server
CNT Extract Warning, Res: 0, CNT Area not Empty
Contents Package Extracting Ok, Time: 00:10
1st Boot Ok, DCT4, UPP: 1130
Fl0: 0x01000000-0x01FFFFFF,00EC22F8,Sam K8S2815ETA
Algorithm: u_amd.fia, Ver: 4.52.0
Algorithm Ok, MSID: 84D8C23A2A86076D493454AF62
Decoded MSID: 3E4EBAE9-005B6CB0-A9000000
Encoded FAID: 2BDD1554-A4E2A7C3-6107949E
Area1: 0x01820000-0x01A3FFFF Erased, Time: 00:21
PPM Flashing Completed, Time: 00:10
Flashing Completed, Rebooting Mobile

09-04-2007, 10:15	#1 (permalink)
rajus Freak Poster Join Date: Jan 2006 Posts: 219 Member: 217853 Status: Offline Thanks Meter: 13	help me in my 3220 when customer gave me set that time it had writting error then i change flash ic i got erassing error message i thought may be fault in flash ic again i changed new flash ic same error then i take out ic's from 100% ok set i changed all its ic's with the dead one i mean to say flash, uem, upp then it show same error meaasge .below flash id is correct st noname i checked it already before interchanging the ic's 1st Boot Ok, DCT4, UPP: 1130 Fl0: 0x01000000-0x01FFFFFF,00208804,St No Name Algorithm: u_st_i.fia, Ver: 4.61.0 Algorithm Ok, MSID: 84D8C23A2A86076D493454AF62 Decoded MSID: 3E4EBAE9-005B6CB0-A9000000 Encoded FAID: 2BDD1554-A4E2A7C3-6107949E Erasing: 0x01820000-0x01A3FFFF ... Erasing Error: 10, at: 0x01820000-0x0183FFFF, 940207, Time: 00:00 Process Failed, Repowering Mobile let's we solve this problem together

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help me in my dead JAM	mm_labban	HTC & PDA WM( With Touchscreen)	1	07-28-2007 21:02
help me in my dead JAM	mm_labban	HTC & PDA WM( With Touchscreen)	0	07-25-2007 13:40
mr gobi plz help me in my cable set	amiriratel	VygisToolbox	4	02-02-2007 00:55
pls help me in my tornado	alkhawaja	UFS2 + UFS3-Tornadoflasher	2	05-18-2005 07:46
Helpe me in my mxy-5m please	Rui Matias	Phone Unlocking Codes & Maps	0	12-18-2003 04:04

09-04-2007, 10:35	#2 (permalink)
tahir-khan Freak Poster Join Date: Sep 2004 Age: 41 Posts: 370 Member: 83780 Status: Offline Thanks Meter: 49	use JAF box + pkey ur problem ll be solve tested by me 100% work just try and post result Good luck Regards

09-05-2007, 08:15	#3 (permalink)
xtremeburaq Registered User Join Date: Apr 2007 Posts: 509 Member: 483748 Status: Offline Thanks Meter: 47	USE SAM FLASH IC UR PROBLEM WILL BE DEFINATELY SOLVE. JUST DO IT.

09-06-2007, 06:48	#5 (permalink)
That'sme Freak Poster Join Date: Feb 2006 Location: Inside Boxes Posts: 303 Member: 228871 Status: Offline Thanks Meter: 43	Just rehot a bit the upp ur problem will be solved.