< I need Help Please 7610 Keypad problem > - GSM-Forum

feraso · 07-25-2008, 21:26

I have problem with 7610 keypad
when I press On No.8 Button >>5
No.7 Button >> 4
Hangup Button >> Call
No.9 Button >> 6

I changed both Keypad IC
and I heated CPU
and I checked all the ways but no way
plaeae, any body can help me .

.::ZUBER::. · 07-26-2008, 03:34

Quote:

Originally Posted by feraso

I have problem with 7610 keypad
when I press On No.8 Button >>5
No.7 Button >> 4
Hangup Button >> Call
No.9 Button >> 6

I changed both Keypad IC
and I heated CPU
and I checked all the ways but no way
plaeae, any body can help me .

dear friend, its not keypad ic problem, dear you have not flash the phone so pls flash & if your problem is not solve the reball cpu or change it.

chenex78 · 07-26-2008, 03:41

sir,to make it sure,you have to reballs the CPU or if reballs still not working,replace new CPU...............good luck

RHAYMART · 07-26-2008, 03:44

sir make write pm or flash it

feraso · 07-26-2008, 14:03

thanks guys for helping
I re balled the CPU and its works 100%

07-25-2008, 21:26	#1 (permalink)
feraso Junior Member Join Date: Dec 2003 Location: Damascus - Syria Age: 46 Posts: 21 Member: 46451 Status: Offline Thanks Meter: 3	< I need Help Please 7610 Keypad problem > I have problem with 7610 keypad when I press On No.8 Button >>5 No.7 Button >> 4 Hangup Button >> Call No.9 Button >> 6 I changed both Keypad IC and I heated CPU and I checked all the ways but no way plaeae, any body can help me .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need help for s90 keypad problem when it gets incoming call	sartaj	Chinese Models & Cloned Phones	1	07-21-2009 06:03
need help for 7610 keypad	JOSEVARGHESE	Nokia Hardware & Hardware Repair	1	02-14-2009 07:29
7610 keypad problem... help	iwan8818	WD2 & APE (Symbian Phones)	2	12-01-2008 12:36
6822 Keypad Problem..need help please.	bakhshalvi007	Nokia Hardware & Hardware Repair	0	01-30-2007 14:02
7610 Keypad Problem	malta	Nokia Hardware & Hardware Repair	6	02-02-2005 18:29

07-26-2008, 03:41	#3 (permalink)
chenex78 Junior Member Join Date: Oct 2007 Posts: 17 Member: 621317 Status: Offline Thanks Meter: 3	sir,to make it sure,you have to reballs the CPU or if reballs still not working,replace new CPU...............good luck

07-26-2008, 03:44	#4 (permalink)
RHAYMART Temporary banned !! Join Date: Jul 2008 Location: PHILIPPINES Posts: 33 Member: 819855 Status: Offline Thanks Meter: 7	sir make write pm or flash it

07-26-2008, 14:03	#5 (permalink)
feraso Junior Member Join Date: Dec 2003 Location: Damascus - Syria Age: 46 Posts: 21 Member: 46451 Status: Offline Thanks Meter: 3	thanks guys for helping I re balled the CPU and its works 100%