2300 lcd blinks ... - GSM-Forum

Byte · 07-28-2004, 17:38

Hello every body

i have nokia 2300 which i flash it , now there is no network ..., i write PMM file for it ( from a new 2300 phone and also from the internet ) but after the write done the lcd blinks and only light ...., before the pmm writing the phone works fine but no network ...

pls help

ps i'm using n-gage cable ( it works great for flashing )

ANUCHOPRA · 07-28-2004, 18:14

hi,
i had the same problem, & u need a good flash file & corresponding pm file.
mail me at [email protected] & i ll reply to u with attached 2300 files .

kaisar · 07-28-2004, 20:21

I'll give u a good pm, just send me your email

Byte · 07-29-2004, 06:51

[email protected] is my e-mail ...,
pls send it to ...

BR
BYTE

mtech6928 · 08-03-2004, 15:48

in local mode the lcd is ok?

Byte · 08-04-2004, 16:07

i repair it with a good pmm file ..., most of the pmm files on this forum is bad..., so every 1 in this forum must try a good 1

merulez29 · 08-05-2004, 12:50

Send me too with good pmm... My email is [email protected]... Ihave problem with my 2300 too...

Thanks in advance!

merulez29

Byte · 08-09-2004, 04:21

check your mail

br

byte

mogh · 08-10-2004, 08:40

try to erase the ppm then write pmm, unlock

VsH-GsM · 08-10-2004, 10:18

No need to good pm!

ANY PM file should work!

SOLUTION IS : Erase EEP_PMM, Write PMM, UNLOCK! (YOU MUST UNLOCK PHONE IMMEDIATELLY AFTER WRITE PMM)

that`s all

magnet · 08-10-2004, 12:38

o.k then ill try with the one i have
thank u

Byte · 10-24-2004, 06:48

@vsh-gsm

How to erase EEP_PMM Only ...?

mtmc · 10-24-2004, 09:30

hi
use the ufs-3 the erase flash as the address apper in sw
the flash phone with mcu and ppm and
write pmm value and unlock

07-28-2004, 17:38	#1 (permalink)
Byte Registered User Join Date: Sep 2003 Location: Palestine Age: 50 Posts: 1,951 Member: 39208 Status: Offline Thanks Meter: 152	2300 lcd blinks ... Hello every body i have nokia 2300 which i flash it , now there is no network ..., i write PMM file for it ( from a new 2300 phone and also from the internet ) but after the write done the lcd blinks and only light ...., before the pmm writing the phone works fine but no network ... pls help ps i'm using n-gage cable ( it works great for flashing )

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2300 lcd light problem	mani pkm	Nokia Hardware & Hardware Repair	1	06-15-2009 11:21
2300 lcd	imranieman	Nokia Digital Core Technology 4 ( DCT-4 )	1	09-08-2008 15:13
W800 lcd blinking and white lcd	Sezamek	Cruiser Suite	0	06-14-2006 17:25
2300 lcd tracks	osmanabu	Nokia Hardware & Hardware Repair	0	10-10-2005 22:14
Nokia 2300 LCD blank after 15second boot in menu boot	TokeiLampin	Nokia Digital Core Technology 4 ( DCT-4 )	2	08-06-2005 04:16

07-28-2004, 18:14	#2 (permalink)
ANUCHOPRA Freak Poster Join Date: Jul 2004 Location: WHERE INDIAN MEETS THE PACIFIC Age: 45 Posts: 138 Member: 73815 Status: Offline Thanks Meter: 4	hi, i had the same problem, & u need a good flash file & corresponding pm file. mail me at [email protected] & i ll reply to u with attached 2300 files .

07-28-2004, 20:21	#3 (permalink)
kaisar Freak Poster Join Date: Jul 2004 Location: Sarolangun, Jambi Indonesia Age: 43 Posts: 134 Member: 74776 Status: Offline Thanks Meter: 3	I'll give u a good pm, just send me your email

07-29-2004, 06:51	#4 (permalink)
Byte Registered User Join Date: Sep 2003 Location: Palestine Age: 50 Posts: 1,951 Member: 39208 Status: Offline Thanks Meter: 152	[email protected] is my e-mail ..., pls send it to ... BR BYTE

08-03-2004, 15:48	#5 (permalink)
mtech6928 Freak Poster Join Date: Jul 2004 Location: m'sia Age: 42 Posts: 134 Member: 74212 Status: Offline Thanks Meter: 5	in local mode the lcd is ok?

08-04-2004, 16:07	#6 (permalink)
Byte Registered User Join Date: Sep 2003 Location: Palestine Age: 50 Posts: 1,951 Member: 39208 Status: Offline Thanks Meter: 152	i repair it with a good pmm file ..., most of the pmm files on this forum is bad..., so every 1 in this forum must try a good 1

08-05-2004, 12:50	#7 (permalink)
merulez29 Freak Poster Join Date: Apr 2004 Location: Fahad Al Salem, Kuwait Age: 42 Posts: 176 Member: 63385 Status: Offline Thanks Meter: 3	Send me too with good pmm... My email is [email protected]... Ihave problem with my 2300 too... Thanks in advance! merulez29

08-09-2004, 04:21	#8 (permalink)
Byte Registered User Join Date: Sep 2003 Location: Palestine Age: 50 Posts: 1,951 Member: 39208 Status: Offline Thanks Meter: 152	check your mail br byte

08-10-2004, 08:40	#9 (permalink)
mogh Junior Member Join Date: Apr 2003 Location: manila Age: 49 Posts: 36 Member: 26035 Status: Offline Thanks Meter: 0	try to erase the ppm then write pmm, unlock

08-10-2004, 10:18	#10 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	No need to good pm! ANY PM file should work! SOLUTION IS : Erase EEP_PMM, Write PMM, UNLOCK! (YOU MUST UNLOCK PHONE IMMEDIATELLY AFTER WRITE PMM) that`s all

08-10-2004, 12:38	#11 (permalink)
magnet No Life Poster Join Date: Nov 2002 Location: cellworld Age: 47 Posts: 731 Member: 17907 Status: Offline Thanks Meter: 42	o.k then ill try with the one i have thank u

10-24-2004, 06:48	#12 (permalink)
Byte Registered User Join Date: Sep 2003 Location: Palestine Age: 50 Posts: 1,951 Member: 39208 Status: Offline Thanks Meter: 152	@vsh-gsm How to erase EEP_PMM Only ...?

10-24-2004, 09:30	#13 (permalink)
mtmc Freak Poster Join Date: Aug 2004 Location: www.Tools4Gsm.com Age: 46 Posts: 289 Member: 79725 Status: Offline Thanks Meter: 5	hi use the ufs-3 the erase flash as the address apper in sw the flash phone with mcu and ppm and write pmm value and unlock