N80 white screen - GSM-Forum

stefanusrudy · 11-12-2007, 09:54

hi,
i have got a n80, only white screen when turn on.
i have tried change flex cable and LCD but no luck.
fully erase and then flash the phone completly success with JAF, but with MT-box got low level format and extract content fail, though the phone can change mode to local/test mode.
when try make self test, only CMT_APE_WAKE_UP test failed.

does somebody has any idea how to fix this problem, also what the meaning of CMT_APE_WAKE_UP test?

thanks in advance and regards

ebu mohammed-emin · 11-12-2007, 10:13

mybe befor u get phone another try to unlock and demage pcb!

ebu mohammed-emin

stefanusrudy · 11-12-2007, 10:25

thanks for the reply,
but i don't think so, all nokia phone in my country was sold without network lock..

uti79 · 11-22-2007, 15:58

Could somebody explain me what is happening with my n80 it have a few hours till new and I want to unlock it but the sandwich processor is glued and I have putted some adhesive removing liquid to remove the glue but was not good and the only thing bad I think was that I have putted to much and is entered under the flash ic .After that I clean up with alcohol and power on the phone.All was ok it power on and I have made the unlock with allgsmunlock imei calculator ,after I entered the code the phone is unlocked and ok .After that I have putted to charge it and after 1 hour it appears just white screen .CAN SOMEONE HELP ME PLEASE.

mustafa_180 · 01-13-2008, 10:04

I have a n80,its call out going-incoming is ok but
Lcd is white.what to do tell me somthing.pleass
Masum

faridgsm3 · 01-13-2008, 10:12

did you check u r panel???

mustafa_180 · 01-13-2008, 16:18

I chaked its Lcd,panel,flix cabal but problem not solved.
pleas help me

zahed1978 · 01-14-2008, 02:49

change flix cabal ....................

invert · 01-14-2008, 03:44

try to change a good lcd.. if no luck may be the connector is damage

ekel · 01-14-2008, 05:09

Quote:

Originally Posted by stefanusrudy

hi,
i have got a n80, only white screen when turn on.
i have tried change flex cable and LCD but no luck.
fully erase and then flash the phone completly success with JAF, but with MT-box got low level format and extract content fail, though the phone can change mode to local/test mode.
when try make self test, only CMT_APE_WAKE_UP test failed.

does somebody has any idea how to fix this problem, also what the meaning of CMT_APE_WAKE_UP test?

thanks in advance and regards

bro, are u sure lcd & flex ok?

zacksonite · 01-20-2008, 12:51

bro, are u sure lcd & flex ok?

mustafa_180 · 01-25-2008, 18:41

I m have chaked my Lcd,panel & flix by another mother bord

Please halp

mustafa_180 · 01-25-2008, 18:46

I have chaked Lcd,Pnel,& flix by Another PCB.
Everyone is cool,but my problem is not solved Please help me

skyangelfx · 08-16-2008, 19:41

Can be Solve by cleaning and heating the CPU .......

11-12-2007, 09:54	#1 (permalink)
stefanusrudy No Life Poster Join Date: Mar 2005 Location: S7°1x'xxx" - E112°4x'xxx" Posts: 2,807 Member: 128035 Status: Offline Thanks Meter: 317	N80 white screen hi, i have got a n80, only white screen when turn on. i have tried change flex cable and LCD but no luck. fully erase and then flash the phone completly success with JAF, but with MT-box got low level format and extract content fail, though the phone can change mode to local/test mode. when try make self test, only CMT_APE_WAKE_UP test failed. does somebody has any idea how to fix this problem, also what the meaning of CMT_APE_WAKE_UP test? thanks in advance and regards

11-22-2007, 15:58	#4 (permalink)
uti79 Freak Poster Join Date: Feb 2005 Location: Romania Age: 45 Posts: 209 Member: 116362 Status: Offline Thanks Meter: 21	Also I got a n80 with white screen... Could somebody explain me what is happening with my n80 it have a few hours till new and I want to unlock it but the sandwich processor is glued and I have putted some adhesive removing liquid to remove the glue but was not good and the only thing bad I think was that I have putted to much and is entered under the flash ic .After that I clean up with alcohol and power on the phone.All was ok it power on and I have made the unlock with allgsmunlock imei calculator ,after I entered the code the phone is unlocked and ok .After that I have putted to charge it and after 1 hour it appears just white screen .CAN SOMEONE HELP ME PLEASE.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N80 White Screen	adene	Nokia Base Band 5 ( BB-5 )	5	02-08-2007 18:46
n80 white screen	reji	Nokia Hardware & Hardware Repair	0	01-14-2007 21:31
n80 white screen	kannan_fono	Nokia Hardware & Hardware Repair	0	01-12-2007 21:25
Nokia N80 White Screen?? Help Needed	djskylineuk	Nokia Base Band 5 ( BB-5 )	1	12-08-2006 14:29

11-12-2007, 10:13	#2 (permalink)
ebu mohammed-emin No Life Poster Join Date: Apr 2006 Location: The Arrivals Posts: 1,437 Member: 263993 Status: Offline Sonork: 100.1612432 Thanks Meter: 173	mybe befor u get phone another try to unlock and demage pcb! ebu mohammed-emin

11-12-2007, 10:25	#3 (permalink)
stefanusrudy No Life Poster Join Date: Mar 2005 Location: S7°1x'xxx" - E112°4x'xxx" Posts: 2,807 Member: 128035 Status: Offline Thanks Meter: 317	thanks for the reply, but i don't think so, all nokia phone in my country was sold without network lock..

01-13-2008, 10:04	#5 (permalink)
mustafa_180 Freak Poster Join Date: Nov 2007 Location: Bangladesh Posts: 393 Member: 638097 Status: Offline Sonork: 100.1649741 Thanks Meter: 43	I have a n80,its call out going-incoming is ok but Lcd is white.what to do tell me somthing.pleass Masum

01-13-2008, 10:12	#6 (permalink)
faridgsm3 Freak Poster Join Date: Apr 2006 Location: qom-iran Posts: 113 Member: 256214 Status: Offline Thanks Meter: 10	did you check u r panel???

01-13-2008, 16:18	#7 (permalink)
mustafa_180 Freak Poster Join Date: Nov 2007 Location: Bangladesh Posts: 393 Member: 638097 Status: Offline Sonork: 100.1649741 Thanks Meter: 43	I chaked its Lcd,panel,flix cabal but problem not solved. pleas help me

01-14-2008, 02:49	#8 (permalink)
zahed1978 No Life Poster Join Date: Feb 2007 Location: K.S.A Posts: 528 Member: 444785 Status: Offline Thanks Meter: 170	change flix cabal ....................

01-14-2008, 03:44	#9 (permalink)
invert Insane Poster Join Date: Mar 2006 Location: baguio city Posts: 77 Member: 241231 Status: Offline Thanks Meter: 16	try to change a good lcd.. if no luck may be the connector is damage

01-20-2008, 12:51	#11 (permalink)
zacksonite No Life Poster Join Date: Jun 2006 Posts: 761 Member: 289307 Status: Offline Thanks Meter: 44	bro, are u sure lcd & flex ok?

01-25-2008, 18:41	#12 (permalink)
mustafa_180 Freak Poster Join Date: Nov 2007 Location: Bangladesh Posts: 393 Member: 638097 Status: Offline Sonork: 100.1649741 Thanks Meter: 43	I m have chaked my Lcd,panel & flix by another mother bord Please halp

01-25-2008, 18:46	#13 (permalink)
mustafa_180 Freak Poster Join Date: Nov 2007 Location: Bangladesh Posts: 393 Member: 638097 Status: Offline Sonork: 100.1649741 Thanks Meter: 43	I have chaked Lcd,Pnel,& flix by Another PCB. Everyone is cool,but my problem is not solved Please help me

08-16-2008, 19:41	#14 (permalink)
skyangelfx Freak Poster Join Date: Feb 2008 Posts: 170 Member: 714778 Status: Offline Thanks Meter: 13	Can be Solve by cleaning and heating the CPU .......