GSM-Forum - nokia 1650 no power on.

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Nokia Hardware & Hardware Repair (https://forum.gsmhosting.com/vbb/f148/)

- - nokia 1650 no power on. (https://forum.gsmhosting.com/vbb/f148/nokia-1650-no-power-532992/)

nokia 1650 no power on.

hello,
1650 no power plz give tips thankes.

JAF version 1.98.47
Detected PKEY: 90002CCA
Card life counter: 99.07%
P-key nokia module version 01.01
Detected JAF INTERFACE version: 01.B0, Driver version: 40000, Library version: 30112
JAF DCT4/BB5 LOADERS DIR: C:\Programmi\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Programmi\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Programmi\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Programmi\ODEON\JAF\Flash3\
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!

fst Erase the set with jaf r mt box then full flash the set write good pm and unlock the set and enjoy

Operation took 0 minutes 45 seconds...
Restarting MCU...
CNT: C:\Program Files\Nokia\Phoenix\Products\RM-305\rm3050_nai5.23aa
Booting phone...
MCU ID: 0x2292
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 327E0001 <=> SPANSION -> 71NS128P Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x7E320100
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x7528; Loader chk: 8b
Loader is ready...
P-key nokia module version 01.02
MSID: 84CC2207355FBD05467D28F86B
MSID decoded: 3E4EBAE900DCD67EA9000000
FAID: D7D74E083112F6011A5F95F5
Operation took 0 minutes 12 seconds...
Erasing Content Pack...
Found 1 interval(s) to erase
Erasing area: 01760000 - 0179FFFF...
Operation took 0 minutes 2 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 4 seconds...
Restarting MCU...
Operation took 0 minutes 0 seconds...
Flashing Done!
Operation took 4 minutes 28 seconds...

After flash processing...
Waiting for phone to boot...
Failed! Aborting!

try to flash with higher version mat

Try with HWK.........................

I test 5 phons

I try wth hwk but same problem.tell me an other solution.
thnks

Quote:

Originally Posted by mittho.gsm (Post 3284751)

JUST ERASE & FLASH WITH RM-305_dp_v_27_00_all_exMQ.
USE JAF OR UFS ALL OK.