nokia 3300 nem-1 flash problem - GSM-Forum

Similya · 09-26-2010, 08:04

hello, i would just like to ask an idea from you,

i flash this nokia 3300 using UFS but i got this error message.

i can't even get into local, test and normal mode.

hope anyone out there could give me some idea.

hacell · 09-26-2010, 08:06

Yes bro..ic flash damage can you rebuild or change..after that you can reflas again

br
hacell

Similya · 09-26-2010, 15:01

ok, thanks for the info bro, i will try to reheat or replace the flash ic and flash again, i'll post the results later...

Similya · 09-27-2010, 05:07

i reheat and reballs the flash is but still i get the same error using UFS.

when i try to use jaf, i have this opposite result in ufs.

Quote:

Getting MCUID...

MCU ID: 0x1120
Reading flash chip detailes...
FLASH ID0: 01000000 <=> Flash -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 0
FLASH ID1: 01000000 <=> Flash -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: 00 00 00 01 00 02 00 03 00 04 00 05 00 06 00 07

MCU ID: 0x1120
Boot is ready...
Algo is ready...
Loader is ready...
Erasing area: 01000000 - 01FFFFFF...
Done!

Why is it that when erasing the flash file using JAF gives me success but in UFS it is failed.?

09-26-2010, 08:04	#1 (permalink)
Similya Junior Member Join Date: Jan 2008 Posts: 9 Member: 689890 Status: Offline Thanks Meter: 0	nokia 3300 nem-1 flash problem hello, i would just like to ask an idea from you, i flash this nokia 3300 using UFS but i got this error message. i can't even get into local, test and normal mode. hope anyone out there could give me some idea.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
DES key Driver	black	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	02-08-2014 04:50
8810 mbus-cable	zfrank	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-19-1999 13:12

09-26-2010, 08:06	#2 (permalink)
hacell No Life Poster Join Date: Oct 2009 Location: love me if you can Posts: 722 Member: 1150088 Status: Offline Sonork: ============ Thanks Meter: 254	Yes bro..ic flash damage can you rebuild or change..after that you can reflas again br hacell

09-26-2010, 15:01	#3 (permalink)
Similya Junior Member Join Date: Jan 2008 Posts: 9 Member: 689890 Status: Offline Thanks Meter: 0	ok, thanks for the info bro, i will try to reheat or replace the flash ic and flash again, i'll post the results later...