nokia 3310 dead - GSM-Forum

MAMAMOBILE · 03-10-2004, 12:33

nokia 3310 dead when i connect this to power sply it takes 0.60 amp.please help me

Own · 03-10-2004, 22:25

- check volt at L201 if have go to next step
- check Vcp ~4.8 volt
- check volt bias clock oscillator and check check out ~26.000 Mhz
- check clock 13 Mhz out to cpu at c 303
- try to flashing
try to 5 step if have problem tell me later and you shoud know about repairing it
regards
Own

Own · 03-10-2004, 22:29

please stop replace or reball because it can not help you
please try to check volt and frequency and clock is the best
regards
Own

mobile star · 03-12-2004, 00:58

i have the same problem i ckeck thim all and the phone take software normaly but still not power on

buschell · 03-13-2004, 12:42

Quote:

Originally Posted by mobile star

i have the same problem i ckeck thim all and the phone take software normaly but still not power on

u said when u flash it,it flashes but does not power-on .flash it will 3330,it must power-on.i have tried and its works.

mobile star · 03-13-2004, 22:41

Quote:

Originally Posted by buschell

u said when u flash it,it flashes but does not power-on .flash it will 3330,it must power-on.i have tried and its works.

i tried 3330 but the same i have many of this bord problem

buschell · 03-15-2004, 12:48

look 4 a working phone,read it.then write on d phone.

Loafer · 03-15-2004, 22:47

try 3315 , on rolis 471 .... works for me , (also fixes NO 1 button not working )

mobile star · 03-16-2004, 22:48

Quote:

Originally Posted by Loafer

try 3315 , on rolis 471 .... works for me , (also fixes NO 1 button not working )

3315 have the same softwar of 3310 i install full flash 2M(3310) and 4M(3330) any one have anther solution (not softwar)

MAMAMOBILE · 03-17-2004, 12:10

This Is Not At All Soft Ware Fault I Know It

boldlink2 · 03-18-2004, 11:38

can anyone help me with 3310 that does unknow flash id or which other solfware do
i flash with

boldlink2

jasko · 03-18-2004, 11:40

try rollis, this will work i think.

BR

Loafer · 03-18-2004, 12:04

reflow entire board...... the press the connector and battery very hard while flashing with rolis (sometimes does not make proper contact thats why it somtimes does not flash ) unknown flash ID .... Reflow flash , or flash corrupt (change), or press cable and battery very hard

does not always work , but worth a try

MAMAMOBILE · 03-19-2004, 13:55

Quote:

Originally Posted by boldlink2

can anyone help me with 3310 that does unknow flash id or which other solfware do
i flash with

boldlink2

try with knok 95 or geoflasher or check & change the cable

b0ba · 03-19-2004, 18:02

@MAMAMOBILE: 0.6A or 6mA?????
If phone consums 0.6A then it's 10000000000...000% hardware problem. I wonder why are you talking about software solutions....

WBR
b0ba

03-10-2004, 12:33	#1 (permalink)
MAMAMOBILE No Life Poster Join Date: Nov 2003 Location: New Delhi Posts: 246 Member: 45198 Status: Offline Thanks Meter: 183	nokia 3310 dead nokia 3310 dead when i connect this to power sply it takes 0.60 amp.please help me

03-15-2004, 12:48	#7 (permalink)
buschell Freak Poster Join Date: Feb 2004 Age: 56 Posts: 491 Member: 52884 Status: Offline Thanks Meter: 13	3310 look 4 a working phone,read it.then write on d phone.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NOKIA 3310 Dead	Shahrukh	Nokia Hardware & Hardware Repair	24	10-03-2003 00:21
Nokia 3310 Dead	taiyeadekeye	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-26-2003 18:17
Nokia 3310 dead after flashing wrong flash?	AFR	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	02-25-2003 18:47
Nokia 3310 dead?	spako	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	06-25-2002 19:26
Nokia 3310 dead need flasher help	jim_pam	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	07-23-2001 09:52

03-10-2004, 22:25	#2 (permalink)
Own No Life Poster Join Date: Aug 2001 Location: Minsk Russia Posts: 915 Member: 5569 Status: Offline Thanks Meter: 10	- check volt at L201 if have go to next step - check Vcp ~4.8 volt - check volt bias clock oscillator and check check out ~26.000 Mhz - check clock 13 Mhz out to cpu at c 303 - try to flashing try to 5 step if have problem tell me later and you shoud know about repairing it regards Own

03-10-2004, 22:29	#3 (permalink)
Own No Life Poster Join Date: Aug 2001 Location: Minsk Russia Posts: 915 Member: 5569 Status: Offline Thanks Meter: 10	please stop replace or reball because it can not help you please try to check volt and frequency and clock is the best regards Own

03-12-2004, 00:58	#4 (permalink)
mobile star Freak Poster Join Date: Feb 2004 Location: jordan Age: 47 Posts: 348 Member: 54916 Status: Offline Thanks Meter: 58	i have the same problem i ckeck thim all and the phone take software normaly but still not power on

03-15-2004, 22:47	#8 (permalink)
Loafer Crazy Poster Join Date: Jul 2002 Location: OnDaNet Age: 43 Posts: 51 Member: 13914 Status: Offline Thanks Meter: 0	try 3315 , on rolis 471 .... works for me , (also fixes NO 1 button not working )

03-17-2004, 12:10	#10 (permalink)
MAMAMOBILE No Life Poster Join Date: Nov 2003 Location: New Delhi Posts: 246 Member: 45198 Status: Offline Thanks Meter: 183	This Is Not At All Soft Ware Fault I Know It

03-18-2004, 11:38	#11 (permalink)
boldlink2 Freak Poster Join Date: Mar 2004 Location: Sweden Age: 48 Posts: 194 Member: 58183 Status: Offline Thanks Meter: 20	can anyone help me with 3310 that does unknow flash id or which other solfware do i flash with boldlink2

03-18-2004, 11:40	#12 (permalink)
jasko Freak Poster Join Date: Feb 2004 Age: 53 Posts: 233 Member: 53880 Status: Offline Thanks Meter: 1	try rollis, this will work i think. BR

03-18-2004, 12:04	#13 (permalink)
Loafer Crazy Poster Join Date: Jul 2002 Location: OnDaNet Age: 43 Posts: 51 Member: 13914 Status: Offline Thanks Meter: 0	reflow entire board...... the press the connector and battery very hard while flashing with rolis (sometimes does not make proper contact thats why it somtimes does not flash ) unknown flash ID .... Reflow flash , or flash corrupt (change), or press cable and battery very hard does not always work , but worth a try

03-19-2004, 18:02	#15 (permalink)
b0ba No Life Poster Join Date: Oct 2001 Location: No route to host. Age: 43 Posts: 895 Member: 6772 Status: Offline Thanks Meter: 17	@MAMAMOBILE: 0.6A or 6mA????? If phone consums 0.6A then it's 10000000000...000% hardware problem. I wonder why are you talking about software solutions.... WBR b0ba