ERROR message when flashing BB5.

[mayor_NY]

ERROR message when flashing BB5.




Error in cmd read id ...
Error in ape get id ...
Q) When using erorr to 5 pin cable
A) or VBUS DET POWER Connection so RX2 no ERROR
Solutions) replace the cable with 7 pin

Q) after the use 7pin remain Erorr?
A) POWER DET or not connected to RX2


solution) clean flash interface (pin, flash point), check or retu TAHVO
Most problems in TAHVO
-------------------------------------------------- ----------------------------

CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 0FD0000651755D51E258231DB9B10843FA32F8C0
Hash: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C: \ Program Files \ Odeon \ JAF \ Flash \ rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot Step2 ...
CMT Boot Ready
CMT Flash ID: 00000000 <=> Flash -> not detected
CMT Flash Data: NOT AVAILABLE
CMT Loader: C: \ Program Files \ Odeon \ JAF \ Flash \ RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Error loading CMT loader ...

The cause of CMT FLASH IC
SOLUTION REBALL CMT FLASH IC
-------------------------------------------------- --------------------------------


Code:
Booting phone ...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: C57A6C30A60BFE52D39FC1751D66A629FB40EB4E
Hash: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946
CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 1E80000999865A516630285C29EAFDD6F54AA796
Hash: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C: \ Program Files \ Odeon \ JAF \ Flash \ rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot Step2 ...
CMT Boot Ready
CMT Flash ID: 225000EC <=> SAMSUNG (SEC) -> K8S6415ETB
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C: \ Program Files \ Odeon \ JAF \ Flash \ RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
CMT loader error loading ......


The cause of - CHECK 1.8 VOLT VDRAM produced by retu
if the damage usually appears retu ERROR

CHECK or REBALL retu
RAP or RAM CHECK
-------------------------------------------------- -----------------------------


Default
LOG 4:

Code:
MCU Flash file: C: \ Program Files \ Nokia \ Phoenix \ Products \ RM-84 \ RM84_50737301.C0
PPM Flash file: C: \ Program Files \ Nokia \ Phoenix \ Products \ RM-84 \ RM84_50737301.V11
CNT Flash file: NONE
APE Variant file:?
Manual mode selected, version can not be checked!
Booting phone ...
CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000352
Asic Public ID: 0C800103D8654E5160FC20C285A16EB1C330C054
Hash: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C: \ Program Files \ Odeon \ JAF \ Flash \ rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot Step2 ...
CMT Boot Ready
CMT Flash ID: 225000EC <=> SAMSUNG (SEC) -> K8S6415ETB
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C: \ Program Files \ Odeon \ JAF \ Flash \ RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
Operation took 0 minutes 6 seconds ...
Sending CNF Data ...
APE blocks present in flash file but no APE MCU detected in phone. Aborting!



The cause of APE FLASH (COMBO MEMORY) not terdetect

- CHECK APE DRIVER
- CHECK or REFLOW COMBO MEMORY
- CHECK OMAP
- TAHVO likely retu or damaged 10%