hi mates 2100 flashing but cant trun on - GSM-Forum

moobile mafia · 12-09-2004, 22:10

hi
i have 2100 i change cobaa ic flash and 26 mgh cry but set is of i falsh the phone but cant power on falshing is ok but cant power on

Bypx · 12-10-2004, 00:52

Check power switch and battery connector first, if problem still post here

CyberoptiK · 12-10-2004, 01:07

Change CCONT, and it will be ok! (i think you have already check mech. parts. lika swticher etc..)

GreetZ

merulez29 · 12-10-2004, 07:18

I've repaired a lot of 2100's with same prob... Flash IC, its defective cant reboot... Change it! 100% OK!...

Chill!

merulez29

mandu · 12-10-2004, 20:14

yes its 100 % flash ic problem change it ...

moobile mafia · 12-10-2004, 21:41

ya u all are right and thaks for reply . i change flash ic but cannot work really starange problum
and in other pcs is single pro i change pa switch hagar cobba reflash but result is same no signal serch those faults and post here

mandu · 12-11-2004, 16:25

if your phone power ok , you must flash mcu,ppm@eeprom and rebuild imei also

hanen · 12-14-2004, 10:51

basha
u broplem in coopa ic
i tested it 100%

naemoo · 12-19-2004, 10:41

ok hanen

كلامك مية المية وانا مجربها كمان

12-09-2004, 22:10	#1 (permalink)
moobile mafia Insane Poster Join Date: Aug 2004 Age: 43 Posts: 60 Member: 79647 Status: Offline Thanks Meter: 1	hi mates 2100 flashing but cant trun on hi i have 2100 i change cobaa ic flash and 26 mgh cry but set is of i falsh the phone but cant power on falshing is ok but cant power on

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
E398 Complit in Flash But Cant Power on	eko_java_cell	Ultima Box Light	4	08-15-2007 14:22
2100 Can Flash But Cannot turn on	NuengEve	Nokia Hardware & Hardware Repair	1	08-22-2005 12:09
3310 can flash but cant on	GOODNESS	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-06-2005 00:25
8310 dead flashing ok but cant power on	mobilemafia	Nokia Hardware & Hardware Repair	13	06-11-2003 23:00

12-10-2004, 00:52	#2 (permalink)
Bypx No Life Poster Join Date: Apr 2004 Location: Milano, Italy Age: 37 Posts: 2,170 Member: 62336 Status: Offline Thanks Meter: 115	Check power switch and battery connector first, if problem still post here

12-10-2004, 01:07	#3 (permalink)
CyberoptiK No Life Poster Join Date: Sep 2003 Location: GermanY Posts: 972 Member: 38922 Status: Offline Thanks Meter: 35	Change CCONT, and it will be ok! (i think you have already check mech. parts. lika swticher etc..) GreetZ

12-10-2004, 07:18	#4 (permalink)
merulez29 Freak Poster Join Date: Apr 2004 Location: Fahad Al Salem, Kuwait Age: 42 Posts: 176 Member: 63385 Status: Offline Thanks Meter: 3	I've repaired a lot of 2100's with same prob... Flash IC, its defective cant reboot... Change it! 100% OK!... Chill! merulez29

12-10-2004, 20:14	#5 (permalink)
mandu Freak Poster Join Date: Oct 2002 Location: INDIA Posts: 292 Member: 17243 Status: Offline Thanks Meter: 13	yes its 100 % flash ic problem change it ...

12-10-2004, 21:41	#6 (permalink)
moobile mafia Insane Poster Join Date: Aug 2004 Age: 43 Posts: 60 Member: 79647 Status: Offline Thanks Meter: 1	ya u all are right and thaks for reply . i change flash ic but cannot work really starange problum and in other pcs is single pro i change pa switch hagar cobba reflash but result is same no signal serch those faults and post here

12-11-2004, 16:25	#7 (permalink)
mandu Freak Poster Join Date: Oct 2002 Location: INDIA Posts: 292 Member: 17243 Status: Offline Thanks Meter: 13	if your phone power ok , you must flash mcu,ppm@eeprom and rebuild imei also

12-14-2004, 10:51	#8 (permalink)
hanen No Life Poster Join Date: Jun 2004 Location: E G Y P T Age: 40 Posts: 614 Member: 70053 Status: Offline Thanks Meter: 85	basha u broplem in coopa ic i tested it 100%

12-19-2004, 10:41	#9 (permalink)
naemoo Junior Member Join Date: Jul 2004 Age: 48 Posts: 35 Member: 73761 Status: Offline Thanks Meter: 2	ok hanen كلامك مية المية وانا مجربها كمان