Nokia c2-03 camera problem - GSM-Forum

mahzra azra · 05-20-2013, 05:27

in my c2-03 ,when i open camera,it said opration faild.
i chake it with atf,show me dcc filemismatc.
i select dcc file but it does not accept it.when i flashed it every thing is okk dcc file as well.
but camera show me only some colar no any image looks like that display is damage and after capture set go on gang.
i change camera,every thing happen as above.
anybody can help me????
I changed it infinion power and flash from other dead board

shageer imran · 05-20-2013, 12:20

Quote:

Originally Posted by mahzra azra

in my c2-03 ,when i open camera,it said opration faild.
i chake it with atf,show me dcc filemismatc.
i select dcc file but it does not accept it.when i flashed it every thing is okk dcc file as well.
but camera show me only some colar no any image looks like that display is damage and after capture set go on gang.
i change camera,every thing happen as above.
anybody can help me????
I changed it infinion power and flash from other dead board

i am also facing this problem.

HUM · 05-20-2013, 13:47

first replace camera
second replace flex
third reball infineon chip
if still same than u have to change both infineon chip and flash ic

sajidshah50 · 05-20-2013, 13:54

Quote:

Originally Posted by HUM

first replace camera
second replace flex
third reball infineon chip
if still same than u have to change both infineon chip and flash ic

I agree with HUM............

mahzra azra · 05-21-2013, 08:10

Quote:

Originally Posted by sajidshah50

i agree with hum............

i already changed both ic infinion and flash becose set was dead came to me.
Flex is new . After changing camera ,every thing happen as i written above and it will be happen every time when i change camera.

rcf1106 · 05-21-2013, 08:22

check the line of the camera

05-20-2013, 05:27	#1 (permalink)
mahzra azra No Life Poster Join Date: Feb 2012 Location: kanpur Posts: 1,429 Member: 1722956 Status: Offline Sonork: mybestfriend.adeel Thanks Meter: 305	Nokia c2-03 camera problem in my c2-03 ,when i open camera,it said opration faild. i chake it with atf,show me dcc filemismatc. i select dcc file but it does not accept it.when i flashed it every thing is okk dcc file as well. but camera show me only some colar no any image looks like that display is damage and after capture set go on gang. i change camera,every thing happen as above. anybody can help me???? I changed it infinion power and flash from other dead board Last edited by mahzra azra; 05-20-2013 at 05:30. Reason: SIZE OF LANGUAGE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-20-2013, 13:47	#3 (permalink)
HUM No Life Poster Join Date: Jul 2005 Location: karachi Posts: 8,673 Member: 161728 Status: Offline Sonork: 100.1582708 Thanks Meter: 2,237	first replace camera second replace flex third reball infineon chip if still same than u have to change both infineon chip and flash ic

05-21-2013, 08:22	#6 (permalink)
rcf1106 Junior Member Join Date: Oct 2008 Posts: 22 Member: 877098 Status: Offline Sonork: big boss Thanks Meter: 5	check the line of the camera