Rh 19 3100 CS dead after flashing - GSM-Forum

srivignesh · 06-07-2005, 06:13

I got Rh 19 3100 in contact service. after flashing it was ok. twice i got c.s repeatedly. so slighly warmed up the pcb. then is dead and now when flashing it shows error on cnt file flashing, what to do next, advance thanks to the helper

srivignesh · 06-07-2005, 06:41

1st Boot Ok, DCT4, UPP: 1120
FlId Aliasing with: 00EC22F0
Fl0: 0x01000000-0x017FFFFF,00EC22F2,Sam K5U64418TM
Algorithm: u_amd.fia
Algorithm Ok, MSID: 84D34ACCDF70C9E081977410E8
Decoded MSID: 516EBAE9-008BAC53-A9000000
Encoded FAID: 665D74C5-5151BE55-9C4D8A0F
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x0154FFFF Erased, Time: 00:44
Area3: 0x01680000-0x017EFFFF Erased, Time: 00:12
Area4: 0x01EB0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 01:39
Area1: 0x01550000-0x0167FFFF Erased, Time: 00:10
CNT Flashing Completed, Time: 00:08
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

Azampk · 06-07-2005, 09:22

Quote:

Originally Posted by srivignesh

I got Rh 19 3100 in contact service. after flashing it was ok. twice i got c.s repeatedly. so slighly warmed up the pcb. then is dead and now when flashing it shows error on cnt file flashing, what to do next, advance thanks to the helper

may be sort under flash ic or uem chek wich one was warmed and open it rebell it and then reflash it

*************Azam******************

adilusta · 06-07-2005, 11:28

Quote:

Originally Posted by srivignesh

I got Rh 19 3100 in contact service. after flashing it was ok. twice i got c.s repeatedly. so slighly warmed up the pcb. then is dead and now when flashing it shows error on cnt file flashing, what to do next, advance thanks to the helper

version 6,01 software-----------------------------

austinchan · 06-07-2005, 11:31

Quote:

Originally Posted by srivignesh

1st Boot Ok, DCT4, UPP: 1120
FlId Aliasing with: 00EC22F0
Fl0: 0x01000000-0x017FFFFF,00EC22F2,Sam K5U64418TM
Algorithm: u_amd.fia
Algorithm Ok, MSID: 84D34ACCDF70C9E081977410E8
Decoded MSID: 516EBAE9-008BAC53-A9000000
Encoded FAID: 665D74C5-5151BE55-9C4D8A0F
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x0154FFFF Erased, Time: 00:44
Area3: 0x01680000-0x017EFFFF Erased, Time: 00:12
Area4: 0x01EB0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 01:39
Area1: 0x01550000-0x0167FFFF Erased, Time: 00:10
CNT Flashing Completed, Time: 00:08
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

try to flash mcu and ppm only,cnt leave it.i think is ok.

HP-King · 06-20-2005, 14:07

try to erase pmm files. use 3100 erase files. u can get it in griffin software. andthen after erase u'r 3100. u can flash it again MCU+PMM.
Gud Luck

simonng83 · 07-16-2005, 09:02

hi 2 all..i also have this problem for 3100 after flashing (Contents Package Extracting Failed:
Process Failed, Repowering Mobile) i also change the cpu n flash....but is same!!!

jarniel · 07-16-2005, 11:02

Quote:

Originally Posted by simonng83

hi 2 all..i also have this problem for 3100 after flashing (Contents Package Extracting Failed:
Process Failed, Repowering Mobile) i also change the cpu n flash....but is same!!!

reflash with the same ver. or higher.....

simonng83 · 07-18-2005, 04:42

mmn....im 4get already..the ver?now what can i do?

TIENPHAT · 07-19-2005, 08:18

please flash new version,don't flash old version.

Friendship · 07-25-2005, 20:30

i think that is ram or upp problem

06-07-2005, 06:13	#1 (permalink)
srivignesh Insane Poster Join Date: Jul 2004 Age: 60 Posts: 71 Member: 73144 Status: Offline Thanks Meter: 5	Rh 19 3100 CS dead after flashing I got Rh 19 3100 in contact service. after flashing it was ok. twice i got c.s repeatedly. so slighly warmed up the pcb. then is dead and now when flashing it shows error on cnt file flashing, what to do next, advance thanks to the helper

06-07-2005, 06:41	#2 (permalink)
srivignesh Insane Poster Join Date: Jul 2004 Age: 60 Posts: 71 Member: 73144 Status: Offline Thanks Meter: 5	This is the problem 1st Boot Ok, DCT4, UPP: 1120 FlId Aliasing with: 00EC22F0 Fl0: 0x01000000-0x017FFFFF,00EC22F2,Sam K5U64418TM Algorithm: u_amd.fia Algorithm Ok, MSID: 84D34ACCDF70C9E081977410E8 Decoded MSID: 516EBAE9-008BAC53-A9000000 Encoded FAID: 665D74C5-5151BE55-9C4D8A0F Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00 Area2: 0x01010000-0x0154FFFF Erased, Time: 00:44 Area3: 0x01680000-0x017EFFFF Erased, Time: 00:12 Area4: 0x01EB0000-0x01FEFFFF Out of Chip Bounds MCU Flashing Completed, Time: 01:39 Area1: 0x01550000-0x0167FFFF Erased, Time: 00:10 CNT Flashing Completed, Time: 00:08 Extracting Contents Package ... Init Local Mode Failed Contents Package Extracting Failed: Process Failed, Repowering Mobile

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need RH-19 3100 PM files urgent	baraka42	UFS2 + UFS3-Tornadoflasher	9	10-31-2012 07:05
rh-19 3100 flash file	gopalhot	Nokia Hardware & Hardware Repair	3	06-10-2008 04:28
Rh 19 3100	hrcmobile	Nokia Digital Core Technology 4 ( DCT-4 )	0	03-25-2006 11:55
RH-19 3100 dead - please help	johny3310	Twisterflasher	3	01-16-2005 16:45

06-20-2005, 14:07	#6 (permalink)
HP-King Insane Poster Join Date: Apr 2005 Location: Medan-Indonesia Age: 46 Posts: 81 Member: 137686 Status: Offline Thanks Meter: 3	try to erase pmm files. use 3100 erase files. u can get it in griffin software. andthen after erase u'r 3100. u can flash it again MCU+PMM. Gud Luck

07-16-2005, 09:02	#7 (permalink)
simonng83 Product Supporter Join Date: Oct 2004 Location: Malaysia & China Hong Kong Age: 41 Posts: 3,013 Member: 85444 Status: Offline Sonork: 100.114343 Thanks Meter: 3,241	hi 2 all..i also have this problem for 3100 after flashing (Contents Package Extracting Failed: Process Failed, Repowering Mobile) i also change the cpu n flash....but is same!!!

07-18-2005, 04:42	#9 (permalink)
simonng83 Product Supporter Join Date: Oct 2004 Location: Malaysia & China Hong Kong Age: 41 Posts: 3,013 Member: 85444 Status: Offline Sonork: 100.114343 Thanks Meter: 3,241	mmn....im 4get already..the ver?now what can i do?

07-19-2005, 08:18	#10 (permalink)
TIENPHAT Freak Poster Join Date: Feb 2005 Age: 42 Posts: 169 Member: 121801 Status: Offline Thanks Meter: 1	please flash new version,don't flash old version.

07-25-2005, 20:30	#11 (permalink)
Friendship Freak Poster Join Date: Apr 2005 Age: 52 Posts: 150 Member: 141127 Status: Offline Thanks Meter: 6	i think that is ram or upp problem