6680 powers on when u put batt - GSM-Forum

hany elsaghir f · 10-04-2007, 00:21

i have 6680 when u put batt it powerson without pressing power switch
i removed the small crystal and jumpered it but still the same
any help?
thnx

mobilagy · 10-04-2007, 03:26

Have you replaced the power switch itself ???
Passed many times before & was cause of it >>>

aaronixsoni · 10-04-2007, 04:09

Quote:

i have 6680 when u put batt it powerson without pressing power switch
i removed the small crystal and jumpered it but still the same
any help?
thnx

please take out the ***** pcb board and check 6680 on off switch whatever there is connection to ground.please check the pcb board thoroughly.Check your on/off switch whatever it can be press or not

.::AssAnovic.:: · 10-04-2007, 04:35

Make this jumper ............

hany elsaghir f · 10-04-2007, 10:33

thnx for ur replies, i will try

maga_ghost · 10-04-2007, 12:39

make sure that u put the power switch right

linekbp · 10-06-2007, 11:30

Quote:

Originally Posted by assanovic

Make this jumper ............

that jumper is for power ic or display? sorry i m a bit confused

:c onfused:

xtremeburaq · 10-06-2007, 12:06

Quote:

Originally Posted by linekbp

that jumper is for power ic or display? sorry i m a bit confused

:c onfused:

IT IS FOR ON/OFF NOT THE DISPLAY.& THE UPPER IC IZ KEYPAD IC.IT HAS TWO SEPERATE IC'S FOR DISPLAY.

mobilagy · 10-06-2007, 12:09

Quote:

Originally Posted by linekbp

that jumper is for power ic or display? sorry i m a bit confused

:c onfused:

It's for pwronx & keys 2,3,7,8 filter >>>

10-04-2007, 00:21	#1 (permalink)
hany elsaghir f Freak Poster Join Date: Feb 2006 Location: EGYPT-ZAGAZIG Posts: 134 Member: 234790 Status: Offline Thanks Meter: 4	6680 powers on when u put batt i have 6680 when u put batt it powerson without pressing power switch i removed the small crystal and jumpered it but still the same any help? thnx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solucion for My x1 x2 x5 .... Charging without Charger and power On When Put Batery	Mierdita	Sagem Hardware Repair Area	22	08-23-2008 19:31
N76 Auto power on when Put Battery !	foreverlovetn	Nokia Base Band 5 ( BB-5 )	1	04-28-2008 13:40
Help...j200i Auto Power On When Put Battery	CHAPRAN	Sony Ericsson Hardware Repair	4	03-25-2007 19:19
8310 can not power on when put batt	watch man	Nokia Hardware & Hardware Repair	6	12-09-2002 02:36
3310 AUTO POWER ON when I put..	sifasli	Nokia Hardware & Hardware Repair	1	11-05-2001 02:08

10-04-2007, 03:26	#2 (permalink)
mobilagy No Life Poster Join Date: Jan 2006 Location: EGYPT Age: 47 Posts: 777 Member: 217479 Status: Offline Thanks Meter: 267	Have you replaced the power switch itself ??? Passed many times before & was cause of it >>>

10-04-2007, 10:33	#5 (permalink)
hany elsaghir f Freak Poster Join Date: Feb 2006 Location: EGYPT-ZAGAZIG Posts: 134 Member: 234790 Status: Offline Thanks Meter: 4	thnx for ur replies, i will try

10-04-2007, 12:39	#6 (permalink)
maga_ghost Junior Member Join Date: Oct 2006 Posts: 6 Member: 375345 Status: Offline Thanks Meter: 0	make sure that u put the power switch right