Strange 1110 contact service - GSM-Forum

tarikalikhan · 02-05-2008, 10:30

Hi to allllll
Nokia 1110 display contact service,

Nokia 1110 problem was blank display then I flash the phone, its hang on display NOKIA, then I clean the PCB and rehot the board. Its shows insert sim and after that it shows contact service, I reflash the phone, but same, remove R205 but all in vain.

Is this from CPU?
Tell me what to do?
tarik

sdiimran · 02-05-2008, 16:46

dear br, just replace the cpu then erase flash& again flash mobile with newer version. thats all.

tarikalikhan · 02-07-2008, 07:11

Now I have fully erase the phone but now unable to flash, 96% erasing and shows error. My softerware version is 4.0.

**.:SARCAR:.** · 02-07-2008, 18:39

all contact service fault is not for software sometime also for hardware
reflow flash chip & cpu if not solved change flash

post result

tarikalikhan · 02-07-2008, 18:46

I did this but the problem persist., Rehot the CPU & FLASH IC once again but all in vain. any other solution. Software could not be loaded and I m using UFS 3, software version 6.01. "Shows erasing flash memory and in 96% PROCESS FAILED, REBOOTING MOBILE".

**.:SARCAR:.** · 02-07-2008, 19:01

I already told you , replace flash ic & full flash your phone

sopnil · 02-07-2008, 19:57

lisen cear fully remove sime ic and wash u pcb keep bulb hit 10 munite then flash again then add sime ic u problem must be solved

02-05-2008, 10:30	#1 (permalink)
tarikalikhan Insane Poster Join Date: May 2007 Posts: 71 Member: 508595 Status: Offline Thanks Meter: 14	Strange 1110 contact service Hi to allllll Nokia 1110 display contact service, Nokia 1110 problem was blank display then I flash the phone, its hang on display NOKIA, then I clean the PCB and rehot the board. Its shows insert sim and after that it shows contact service, I reflash the phone, but same, remove R205 but all in vain. Is this from CPU? Tell me what to do? tarik

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 1110 contact service	murtaza_nns	Nokia Hardware & Hardware Repair	30	12-06-2008 07:41
nokia 1110 contact service help help	manrew	Nokia Digital Core Technology 4 ( DCT-4 )	6	01-13-2007 13:23
1110 contact service	maurohial	Nokia Digital Core Technology 4 ( DCT-4 )	9	09-01-2006 13:02
help me plz (( 1110 contact service ))	tayson_gsm	Nokia Digital Core Technology 4 ( DCT-4 )	3	06-06-2006 16:49
1110 contact service in ufs	ashok_kumar459	Nokia Digital Core Technology 4 ( DCT-4 )	1	03-17-2006 19:55

02-05-2008, 16:46	#2 (permalink)
sdiimran Junior Member Join Date: Jan 2008 Location: mumbai Age: 42 Posts: 26 Member: 689715 Status: Offline Thanks Meter: 5	dear br, just replace the cpu then erase flash& again flash mobile with newer version. thats all.

02-07-2008, 07:11	#3 (permalink)
tarikalikhan Insane Poster Join Date: May 2007 Posts: 71 Member: 508595 Status: Offline Thanks Meter: 14	Now I have fully erase the phone but now unable to flash, 96% erasing and shows error. My softerware version is 4.0.

02-07-2008, 18:39	#4 (permalink)
.:SARCAR:. Moderator Join Date: Jul 2006 Location: Midnapore,West-Bengal,India Posts: 5,402 Member: 322206 Status: Offline Sonork: 100.1594813/.:SARCAR:. Thanks Meter: 1,350	all contact service fault is not for software sometime also for hardware reflow flash chip & cpu if not solved change flash post result

02-07-2008, 18:46	#5 (permalink)
tarikalikhan Insane Poster Join Date: May 2007 Posts: 71 Member: 508595 Status: Offline Thanks Meter: 14	I did this but the problem persist., Rehot the CPU & FLASH IC once again but all in vain. any other solution. Software could not be loaded and I m using UFS 3, software version 6.01. "Shows erasing flash memory and in 96% PROCESS FAILED, REBOOTING MOBILE".

02-07-2008, 19:01	#6 (permalink)
.:SARCAR:. Moderator Join Date: Jul 2006 Location: Midnapore,West-Bengal,India Posts: 5,402 Member: 322206 Status: Offline Sonork: 100.1594813/.:SARCAR:. Thanks Meter: 1,350	I already told you , replace flash ic & full flash your phone

02-07-2008, 19:57	#7 (permalink)
sopnil No Life Poster Join Date: Jun 2007 Location: dhaka,bangladesh Posts: 790 Member: 528679 Status: Offline Thanks Meter: 268	lisen cear fully remove sime ic and wash u pcb keep bulb hit 10 munite then flash again then add sime ic u problem must be solved