All Motorola Pinouts Request [Only Here]
 

Motorola E365, E360 pinout
http://pinouts.ru/connectors/motorola_14p.gif

1 Vchg
2 GND
3 MIC/TDI
4 DLPWR-DCD/Tx_IrDA
5 SPKN/TDO
6 SPKP/Rx_IrDA
7 CTS
8 RXD
9 TXD
10 RTS
11 DSR
12 DTR
13 VBAT-VCHG
14 ACCID/TCK
15 IO13/TMS
16 GND



Motorola (CDMA) cell phones cable connector pinout
http://pinouts.ru/connectors/motorola_15p.gif

1 GND Connected with 22pf to pin 3
2 RF out Connected with 33 pf to pin 8, 33 pf to pin, 33 pf to pin 7
3 GND
4 BAT_FDBAK
5 MAN_TEST connected with 10k to L275 (not used on digital phones)
6 RS232_TX connected to MCU SPI bus
7 RS232_RX connected to MCU SPI bus
8 AUDIO_IN
9 AUDIO_OUT
10 GNDA Ground reference) Connected with 33 pf to pin 13, 33 pf to pin 14
11 UPLINK 11,12,13 - DSC bus connected to the BIC
12 DOWNLINK
13 DSC_EN_B
14 EXT_B+
15 Gnd



Motorola 182c cell phones cable connector pinout

11 Gnd
13 Rx
14 Tx




Motorola 5200, 7200, 7500 cell phones cable connector pinout
http://pinouts.ru/connectors/motorola_8p.gif

1 GND
2 Pos
3 True Data (TD) input
4 Downlink input
5 Uplink output
6 Audio Gnd
7 Audio Out
8 Audio In



Motorola 6200/8200/8400/8700 cell phones cable connector pinout
http://pinouts.ru/connectors/motorola_10p.gif

1 Audio Ground
2 Ext b+
3 T Data
4 Downlink input
5 Uplink input
6 Logic Ground
7 Audio Out - on/off
8 Audio In
9 Manual Test
10 Battery Feedback



Motorola A1200, C260, C266, C330, C331g, C332, C333g, C336, C350, C359, C650, C375, C380, C381, C450, C550, C650, E375, E380, L6, L7, MotoRazr MAXX, RAZR V3, V3x, PEBL U6, V150, V180, V188, V220, V226, V325, V360, V8
http://pinouts.ru/connectors/mini-usb_female.gif

1 VCC +5 VDC
2 D- Data -
3 D+ Data +
x n/c or connected to GND (may be via resistor). Used as a cable detection pin.
4 GND Ground

Cable colors:
Pin Name Cable color Description
1 VCC Red +5 VDC
2 D- White Data -
3 D+ Green Data +
4 GND Black Ground



Motorola A630,A835,A845,A1000, i205,i305,i530,i830,i860,i710,i730,i733,i736,i836, i930, V120,V265,V262,V260,V276,V300,V400,V500,V505,V551, V525,V545,V547, V550,V600,V620,v60t,V60,V60i,V60p,V60s,V66,V70,V71 0,V800,V80,V950,V980,V975,V1050 cell phones cable connector pinout
http://pinouts.ru/connectors/motorola_17p.gif

1 GND
2 R=25 or 33 KOhm to GND in data or charge cable
3 +6v charge voltage
4 Tx
5 Rx
6 RTS
7 Vbus (connect to pin 3 if not used as IC power)
8 CTS
9 DCD
10 RE
11 DTR
12 DSR
13 Serial Enable (if this pin is not pulled to ground your serial cable will not work)

Pins 6,8; pins 13 and 1 should be shorted in cable.

USB pinout (used at least in Motorola Nextel i205, i305, i530, i730, i830, i930).
Mobile phone interface pin Description
1 GND
4 Rx (may be connected to PC USB port, USB D+)
5 Tx (may be connected to PC USB port, USB D-)
6 VBus May be pin 7???

For v600 whith charge, pin 3 and 6 be shorted. USB D+ connect to pin4, USB D- connect to pin5. R=25 KOhm connect to pin1 and pin2. Do not pin 3 and 6 shorted in phone, must be in cable!



Motorola C115, T190, T191, Panasonic A500/X200/X400 cell phones cable connector pinout
http://pinouts.ru/connectors/teleph35sm.gif

GND GND
R Tx
L Rx

Motorola D520, M3x88 cell phones cable connector pinout
http://pinouts.ru/connectors/motorola_10p2.gif

3 Audio Out
4 DSC
5 Downlink
7 Uplink
2,9 GND
10 Charger in



Motorola F3 cable connector pinout
http://pinouts.ru/connectors/motorola_f3.gif

4 Tx
5 Gnd
6 Rx
7 +charge



Motorola RAZR V3 mini-USB Charger pinout
http://pinouts.ru/connectors/mini-usb_male.gif

RAZR V3 will not charge by simply supplying 5V through USB (it's possible to use common USB cable for charging if you are using Motorola special PC driver software).
Motorola uses the pin between Pin #3 and #4 (Pin X) to sense what device is attached to the mini-USB port. Shorting Pin #3 to #2 and #X causes the phone to go into handsfree/carkit mode and the LCD backlight will ignore timeout settings and stay on.
Shorting pin X to pin 2 and to pin 4 via R=200KOhm causes the phone to go into charge mode.

AC adapter
Pin Name Direction Description
1 +5 VDC -?- PC USB Pin 1 (+5 VDC).
2 USB Data -?- shorted to pin x in charger cable.
3 USB Data -?- not connected
X -?- Shorted to pin 2 + shorted to pin 4 via R=200KOhm in charge cable. (R=165KOhm?)
4 GND -?- PC USB pin 4 (GND). Shorted to pin X via R=200KOhm in charge cable. (R=165KOhm?)



Comment by Darrin
A standard Motorola USB charger puts ~1.4vdc onto the x pin of the mini USB plug. A 200k resistor between pin 2 and 4 produces ~1.9vdc on the x pin. This works for Motorola Q (which works from ~1.2vdc to ~1.9vdc), but not for Razr V3m. I had to lower the resistor to 165k. This produces ~1.5vdc and allows the charger to become authorized.


Motorola T180, V2288, T2288 cell phones cable connector pinout
http://pinouts.ru/connectors/motorola_8p2.gif

1 GND
2 Audio Out / POWER on/off (connect with gnd)
3 Downlink
4 152 khz ?
5 Battery+
6 Uplink
7 DCS
8 FM RSSI

Motorola T192 cell phone pinout
http://pinouts.ru/connectors/motorola_t192.gif

1 Gnd
2 Power On
3 Down Link
4 VBatt 3,6V
5 Up Link
6 DSC Enable



Motorola T200, T205, T2688 cell phones cable connector pinout
http://pinouts.ru/connectors/motorola_14p.gif

1 Ext AUD MIC IN / JTAG TMS Use
2 JTAG TRST Use
3 GND / JTAG TMK Use
4 Auxiliary Audio Out / JTAG TDI
5 RS232_DSR
6 RS232_RXD
7 RS232_TXD
8 RS232_DTR
9 DATA ID
10 I06 / JTAG TDO Use
11 IOPN11 – EXT. Power 6V / 200 mA
12 ACCID – Accessory ID (22 KOm)
13 ACCIN
14 GND



Motorola V3688, Timeport, StarTac cell phones cable connector pinout
http://pinouts.ru/connectors/motorola_15p.gif

3 DSC
4 Downlink (Rx)
5 Uplink (Tx)
6 GND
7 Audio out



Motorola V860 cell phone pinout
http://pinouts.ru/connectors/lg_7050r2l.gif

1 BattID
4 FB
10 USB Data-
12,19 GND
15 USB Data+
16 USB +5v
21,22 charge in?



Motorola v680 (CDMA) cable connector pinout
http://pinouts.ru/connectors/lg_7050.gif

GND 19,20 <-->
TX 21 -->
RX 22 <--

is this mistake or you made it like it?
i mean image are in link not as img code.
want to fix it?

help me e365 14 pinout
............................

sorry for late


bro when i make this thread then then IMG option was disable so thats why images not showing








please fix it now

thanx

what do you mean 14 pinout?

help me motorola v3x boat sort ps pin out

Need edl pinouts for moto g2 xt1557