F.A.Q About P2K Series.

[stanner_austin]

Here Is Little Info About P2K ..

May Be This Can Help All Users..

1 P2k How To Connect Phone With Pc.?
A. Use P2k Driver To Detect Phone At Modem .Like Here Software Is Auto install So Just Tick On "Clean And Reinstall " Press Start It Install All. Here Is Link For P2k Driver Only Without Auto Install.
B. After Installing Modem You Have To Switch Phone To P2k Mode To Accept All Another Drivers Which Need For Read And Repair .Use Rsd Lite To Do That.. Link Is Here

2 What Is Reason We Have To Install Driver?
A. Motorola All Command And Loader Base On Factory Info.So They Using P2k Mode And Flash Mode To Access, Modification And Any Changing If We Need.
B. Without Driver We Can't See Phone So Must Install Before Do Anything.. And Open Rsd Lite To Let Him Complete Installation.

3 What Is Reason We Need Rsd Lite?
A. There Is Many Rezone .[1] To Install Complete Driver.[2] To Flash Firmware To Phone [3] Flash Fex File To Phone.

4 What Is Flash Mode?
A. Flash Mode Is Most Important Thing We Need To Flash Phone And Repair Phone. By Pressing {*+#+Power Button} You See Black Screen Which Come Because Of Flash Mode. With Much Info That What In Phone..

5 What Is P2k Mode?
A. P2k Mode Is Need To Send Phone Commands Receiving Data..
B. Modified Flex Area.
C. Modified User Area Like User Code Security Code.

6 At Flash Mode In Phone I Can See Many Info. What Are They?
A. Most Important Info. Boot loader Xx ***x
B. Software Version Info.
C. Interface Which Is Connected.

7 What Is Boot Loader?
A. Boot loader Is = Flash Mode.. Without Boot Loader Your Phone Go To Special Blank Mode.

8 What Is Software Version?
A. Software Version Which Ur Phone Have. You Must Flash Same Version Or Newer Then It Firmware Or ******* Flash File To Phone Only..

9 What Is Blank Mode?
A. Blank Mode Is Special Mode To Use Unlocking Changing Pds And If We Losted Boot loader Then Its Come..

10 How To We Know That Phone Is In Blank Mode?
A. Just Plug Cable To Phone And Pc Your Phone Detect As S Blank ****** Means Your Phone Have No Valid Boot loader. So Its In Blank. You Can Call Him Dead Phone Right Now..

11 What Is LTE And LTE2 Prog And Aragon?
A. Its Are Cpu That Phone Use.

12 What Is PDS?
A. Pds Contact So Much Info About Phone Security .
B. Pds Have Lock Data
C. Pds Have Calculated Security Of Phone.
D. Pds Can Be Rewrites Or Recalculated Via Only Tp. Or Blank Mode With Special Method.

13 What Is Reason At Phone Flash Mode We See Code Corrupted?
A. Firmware Damaged So First Reflash It
B. Pds And Firmware Code Not Matched Do Pds Repair And Reflash It.

14 What Is Reason We See Mem Blank At Phone Flash Mode?
A. Firmware Area Damaged Reflash Will Fix It.
B. Boot Area Damaged Install Boot Will Fix It.
C. Pds Area Damaged Recalculate Or Rewrite Pds Then Flash Will Fix It.

15 What Is Reason We See Some Time Lcd Problem?
A. Flex Area Have Special Part For Lcd Setting Rf Value You Need To Rewrite It.

16 How To Flash Phone With Rsd Lite?
A. Simple Just Connect Phone At Flash Mode [*+#+Power Button]
And Select Active Ur Model & Select Correct Flash File And Press Start ..

17 How To Check Software Version And Boot loader If Phone Lcd Damage Or Blank ?
A. Just Use Simple Flash Mode [*+#+Power Button] And Open Rsd Lite To See Phone Info. For More Details Just See Image.

18 Why Some Phone Start At Flash Mode Only?
A. Firmware Damaged Reflashing Full Flash May Solve
B. Pds Damaged Recalculate Or Rewrite Then Full Flash Need To Resolve Problem

19 What Is Image Flash? (RFDI)
A. It Is Repair File For Repair Boot And Pds For Blank Phones Only. If U Have Phone Which Is Detect In Blank Mode Only. Use RFDI Image To Restore/Repair Pds And Boot Area. After Flashing RFDI File You Must Flash ******* Flash Or Reflash To Phone.

20 What Is ******* Flash And Reflash?
A. Reflash Come With Only Firmware And Drm Area.
B. ******* Flash Come With Firmware, Flex, Pds Info, Drm, Lang, Mostly Everything.

21 What Is Reason Software Not Found Phone Start At Flash Mode Only?
A. Phone Firmware Damaged Reflash ******* Flash Only. To Check
B. Pds Corrupted Rewrite Or Recalculate Then Full Flash May Solve It.
C. Still Same Just Problem With Version In Case You Must Erase Phone Flash Then Do Image Flash To Restore Boot are Then Pds Repair To Check You Get Firmware Version Ok Or Not. If Ok Some Time Need To Reflash Latest Version To Let It Working Perfect .If No Then Have Bad Hardware At Phone.

22 How To See Which Firmware I Have Is Older Then Phone Have? In Easy How To Recognize Motorola Model Version?
A. For Example We Have Phone L7 SW Version R4513_G_08.B7.86R So We Have
R4513_G_08 Is Model Factory Permanent Version Which Should Not Be Change When You Flash Any New Version So Be Sure Your Firmware Start With This.
B7.86R = Is Our Firmware Version If We Have This At Phone We Should Use This One Or Newer Then This To Repair Phone Without It We Will Have Only Flash Mode Or Keypad Led Work Once And Phone Off.


NEWEST AUTO INSTALL DRIVERHERE

IMODE DRIVER ONLY FOR IMODE BASE MOTOROLA
HERE
Just Wait For Unlocking Info Soon I Post Every Tested Phone Method To Unlock And Repair Free.


HOPE THIS CAN HELP ALL..

note : i will update this thread day by day..

BEST REGARDS
Gopal Chevli.

[.:ELSHORBAGY:.]

Great iformation and hope all member use this method it's easy ..... Good explain , But here there is comment about A835 3G this phone Dead , And when i plug USB Data Cable it tell me New hardware and Just updated driver sucessfully , but problem Phone is hidden No Hardware added in file Manager .... Also Big Problem there is no any TP For this phone till now ... Any one faced this problem ??

B.R

[stanner_austin]

@elshorbagy

New hardware and Just updated driver sucessfully

your phone go to Unknowed device..
u can see at universal serial bus

check connector or Ic for it.. better check phone hardware.
must detect then u can do anything at software part..

[krisleslie]

I have a Cingular Razr V3 (R374)
BootLoader: 08.29
SW Version: R374_G_0E.42.15R

I can get to bootloader only. I deleted the MOTO skin accidentally ( didn't know it needed to stay ) and now all I get is the white screen after boot. I need help and I do have most of the common P2K tools and RSD tools so any assitance will be helpful.

I do have a backup of the (A) Drive and the phone book but I don't have a full back up. I don't mind getting a bone stock cingular flash or whatever you want to call it but I need it back and running ASAP.

Any help appreciated (with steps please)

[stanner_austin]

@krisleslie

welcome to gsmhosting.

if you see Rsd lite its just flasher tool for all Motorola phones.
and if you see P2K section you see SHX AND SBF file thread you can search there first for your version. if no found then you can request there you get file from there.

connect phone in flash mode. see up what is flash mode.at post 1
select file in Rsd lite you get it from here.
and press start.
wait little till finish.
after finish phone will restarted in normal mode and you can see at phone LCD.

you get working phone.

[chackmate_jaan]

Sir, stanner_austin
One Problem With Me in Motorolla A1000 Handset after Flash With Victor Headset work properly without SIM Card.
But When Insert SIM Card & Calling then SET is Hang.
If any Solution of this Problem .......!
Plz Give Me Advice
thank in Advcane

[Communication]

Stanner_Austin, Could you please help.

tried to use P2k to unlock C370, C333 and gets this error:

Connecting to phone ...
Switching to P2K mode ...
Connected to: 'Motorola Test Interface'
Switching to flash mode ...
Connected to: 'Motorola Flash'
Connected OK
Sending loader to phone ...
ERROR: Receiving 0x41 ACK
ERROR: Send loader failed

And then I tried to unlock my V66 T-Mobile phone and the software does not do anything its completely different from the C370.

HELP!! any assistance would be greatly appreciated.

[stanner_austin]

@Communication

welcome to gsmhosting.

you have to use box and tools.
you can't do with free tools

[Raulperez53]

what is DRM ?? now in Scout section flashes have DRM ? this is for repair ? like pds ?

[systemworm]

Originally Posted by Raulperez53

what is DRM ?? now in Scout section flashes have DRM ? this is for repair ? like pds ?

DRM is graphical interface I think

[hcomp]

thanks for your post
but sorry this driver not work with L6-i Mode and L7-i Mode

can you hellp please

[stanner_austin]

Originally Posted by hcomp

thanks for your post
but sorry this driver not work with L6-i Mode and L7-i Mode

can you hellp please

ok added to first post
here is link
http://www.gsmchevli.com/support/iModedrivers.rar

[hcomp]

Originally Posted by stanner_austin

ok added to first post
here is link
http://www.gsmchevli.com/support/iModedrivers.rar

very thanks for you and goood support

hesham

[farryinn]

hello,i am new here thats y i dont know abt how to flash and etc plz help me for, i have L6 motorola prb is when i start the device buttons blue light is blink for the moment then off and device not working but decive on direct bootloader the follwing version on screen:Boot Loader08.D5SW versionR3511-G-0A.53.0BRi am very thank full to you if you advice with link files & tools for flashing or what you sujest to me plz do help meee thanksfarryL6</p>

[cellkhadim]

what is the difference between p2k driver and motorola drivers(rsdlite),and which one wee need to flash motorola phones using rsd lite plz reply me at your earliest so i can start my work.
thanks in advance