Victor Cracked - GSM-Forum

jjogola · 05-24-2003, 08:30

Hi?
I downloaded and installed the cracked version of Victor s/ware and I am using serial cable. I can read all details of V70 and it unlocks the 1st stage then gives an error on the 2nd stage. Can anyone give me reasons why this is happening?
Thanks in advance.

MicrostarGSM® · 05-24-2003, 09:00

for me working with COM cable and not working with USD cable..

Try to press unlock two three time's it should be ok...

i have unlock my V60 with this crack software....

jjogola · 05-24-2003, 09:03

Hi?
Thanks for the tip. I am going to try it out just now and let you know.
Regards,
JJ.

MicrostarGSM® · 05-24-2003, 09:07

you are welcome...
just to helping each other's as much as i can...

tiri piri · 05-24-2003, 09:18

I JUST UNLOCK V66 WITH USB CABLE WITH 3.2.3 SOFTWARE

MicrostarGSM® · 05-24-2003, 09:56

how come the software not detect my usb cable and the cable can be use for PST????

any idea please sir!!!

NSerN · 05-24-2003, 10:06

Quote:

Originally posted by MicrostarGSM
how come the software not detect my usb cable and the cable can be use for PST????

any idea please sir!!!

SW can't detect USB cable it's detect phone connected to USB cable

About drivers read old posts or it's very hard for you?

jjogola · 05-24-2003, 10:22

Hi?
I have a V70 ver: V708_G_01.04.0FR and when I try to unlock I get the following error:

System message!
Error unlocking, try again. If it will fail for the 2nd time, please report this to [email protected] with the model you are trying to unlock and the s/ware version of the phone"

Is there a problem with my serial cable or what do I need to sort the problem out?
I wait for any ideas.
Thanks in advance.

Syed · 05-24-2003, 10:33

@jjgola
buddy can u give me the download link for teh cracked victor soft.... i need this soft please mail me at [email protected]
or send me a messege on ICQ 231429760

jjogola · 05-24-2003, 10:35

look for the link on the posts before...you will find it there. I also clicked on the link and downloaded it.
Cheers.

MicrostarGSM® · 05-24-2003, 10:36

i have try to connect with the phone and cable still can't....
only my Com cable can use for it...

Wizard1 · 05-24-2003, 18:37

try getting the USB drivers from here
http://forum.gsmhosting.com/vbb/show...threadid=85690

it works for my v60

MicrostarGSM® · 05-24-2003, 18:52

thanks for info i will try it....

Wizard1 · 05-24-2003, 19:06

ALso! Make sure you set your COM number to 4. USB will only work on COM 4

MicrostarGSM® · 05-24-2003, 19:12

ops....no wander my usb cannot support coz i have use COM1 and Not Com4 maybe this will help me...
10000 X thanks

05-24-2003, 08:30	#1 (permalink)
jjogola Freak Poster Join Date: Jun 2001 Location: Nairobi, Kenya Posts: 207 Member: 5093 Status: Offline Thanks Meter: 3	Victor Cracked Hi? I downloaded and installed the cracked version of Victor s/ware and I am using serial cable. I can read all details of V70 and it unlocks the 1st stage then gives an error on the 2nd stage. Can anyone give me reasons why this is happening? Thanks in advance.

05-24-2003, 09:03	#3 (permalink)
jjogola Freak Poster Join Date: Jun 2001 Location: Nairobi, Kenya Posts: 207 Member: 5093 Status: Offline Thanks Meter: 3	V70 unlock Hi? Thanks for the tip. I am going to try it out just now and let you know. Regards, JJ.

05-24-2003, 10:22	#8 (permalink)
jjogola Freak Poster Join Date: Jun 2001 Location: Nairobi, Kenya Posts: 207 Member: 5093 Status: Offline Thanks Meter: 3	V70 unlock problem with Victor 3.2.3 Crack Hi? I have a V70 ver: V708_G_01.04.0FR and when I try to unlock I get the following error: System message! Error unlocking, try again. If it will fail for the 2nd time, please report this to [email protected] with the model you are trying to unlock and the s/ware version of the phone" Is there a problem with my serial cable or what do I need to sort the problem out? I wait for any ideas. Thanks in advance.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Quick Victor Cracked Question	Wizard1	Motorola P2k	9	08-28-2004 05:31
Victor cracked is HDD killer	lypen17	Motorola P2k	4	05-05-2004 21:01
unlock v60 using victor cracked	brucele	Motorola P2k	15	08-25-2003 11:35
v70 flashing with victor cracked	dimon	Motorola P2k	0	06-23-2003 09:12
can't unlock V66 with victor cracked why !	makona	Motorola P2k	5	06-16-2003 13:48

05-24-2003, 09:00	#2 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,938	for me working with COM cable and not working with USD cable.. Try to press unlock two three time's it should be ok... i have unlock my V60 with this crack software....

05-24-2003, 09:07	#4 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,938	you are welcome... just to helping each other's as much as i can...

05-24-2003, 09:18	#5 (permalink)
tiri piri No Life Poster Join Date: Jan 2003 Location: romania brasov Age: 46 Posts: 705 Member: 19672 Status: Offline Sonork: 100.65069 Thanks Meter: 46	I JUST UNLOCK V66 WITH USB CABLE WITH 3.2.3 SOFTWARE

05-24-2003, 09:56	#6 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,938	how come the software not detect my usb cable and the cable can be use for PST???? any idea please sir!!!

05-24-2003, 10:33	#9 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	@jjgola buddy can u give me the download link for teh cracked victor soft.... i need this soft please mail me at [email protected] or send me a messege on ICQ 231429760

05-24-2003, 10:35	#10 (permalink)
jjogola Freak Poster Join Date: Jun 2001 Location: Nairobi, Kenya Posts: 207 Member: 5093 Status: Offline Thanks Meter: 3	look for the link on the posts before...you will find it there. I also clicked on the link and downloaded it. Cheers.

05-24-2003, 10:36	#11 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,938	i have try to connect with the phone and cable still can't.... only my Com cable can use for it...

05-24-2003, 18:37	#12 (permalink)
Wizard1 Freak Poster Join Date: Mar 2003 Location: Toronto, CANADA Posts: 352 Member: 24187 Status: Offline Thanks Meter: 0	try getting the USB drivers from here http://forum.gsmhosting.com/vbb/show...threadid=85690 it works for my v60

05-24-2003, 18:52	#13 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,938	thanks for info i will try it....

05-24-2003, 19:06	#14 (permalink)
Wizard1 Freak Poster Join Date: Mar 2003 Location: Toronto, CANADA Posts: 352 Member: 24187 Status: Offline Thanks Meter: 0	ALso! Make sure you set your COM number to 4. USB will only work on COM 4

05-24-2003, 19:12	#15 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,938	ops....no wander my usb cannot support coz i have use COM1 and Not Com4 maybe this will help me... 10000 X thanks