V3 no display,no display light - GSM-Forum

celluniversal · 08-02-2006, 16:34

V3 no display, no light(only blank dark display)

But keypad light ok

Phone also working good (both incoming and outgoing calls)

What to do i

1)change ribon
OR
2)we have to flash the phone

Needed good advice pls

cellectro · 08-02-2006, 20:34

check flex toward lcd, if that is ok change lcd,should work

originalgraders · 08-02-2006, 22:59

i think make sure flex is not cracked,
i can help u np.
pm

ABOUSHADY · 08-02-2006, 23:20

no flex no lcd
i can help u np
contact [email protected]
msn [email protected]

saolinac · 08-03-2006, 00:08

it's little cristal ic by the flat connector on the pcb.

REGARDS

verse1965 · 08-03-2006, 05:45

Quote:

Originally Posted by saolinac

it's little cristal ic by the flat connector on the pcb.

REGARDS

Do we change it or just reheat etc..?

regards, JOHNNY.

hrkgloballinks · 08-03-2006, 06:06

most of this problem is from the flex.change the flex it works for me

celluniversal · 08-03-2006, 06:21

Quote:

Originally Posted by verse1965

Do we change it or just reheat etc..?

regards, JOHNNY.

Please explain more i cannot understand or do u have any picture OR

Can u pls come in the messanger

Yahoo:[email protected]

ICQ:244-868-730

TRABEL · 08-03-2006, 06:44

o.k listen up.
if you change keypad flex and lcd and still same problem...

it can be 2 problems .
software or hardware from main board.
there is a little crystal IC near mainboard flex conector , rehot it with some flux ... if doesnt help , remove it and make jumper like in this pic.
if doesnt help you need to repair pds and full flash.

my problem got fixed with this jupmer 100% .
you can start with soft if you like ....

good luck

c_ahmad79 · 08-03-2006, 06:59

this is really good soloution........ i will test it soon.........

celluniversal · 08-03-2006, 07:47

For flashing motorola V3 for display problem in Smart clip an seniour poster gaved the what are the flash files to use in smart clip

R374_G_0E.42.07R_A
R374_G_0E.42.08R_A
R374_G_0E.42.0CR

Those files could be used as a solution for the handsets with nonworking internal display after flashing with 9CR version of flash file.)

But i dont have smart clip I am having only usb smart But i dont know which files to select to flash Can anyone know which files to select in usb smart for flashing V3 for display problem

Needed good advice

celluniversal · 08-03-2006, 11:28

Quote:

Originally Posted by celluniversal

For flashing motorola V3 for display problem in Smart clip an seniour poster gaved the what are the flash files to use in smart clip

R374_G_0E.42.07R_A
R374_G_0E.42.08R_A
R374_G_0E.42.0CR

Those files could be used as a solution for the handsets with nonworking internal display after flashing with 9CR version of flash file.)

But i dont have smart clip I am having only usb smart But i dont know which files to select to flash Can anyone know which files to select in usb smart for flashing V3 for display problem

Needed good advice

No reply

WAITING,WAITING

Does any one tried in usb smart????

malta · 11-08-2007, 10:04

but if that little ic is not in that place and flashed the phone changed the flex and the lcd and still the same problem what will be the solution

**GSMJordan** · 11-18-2007, 11:30

Quote:

Originally Posted by TRABEL

o.k listen up.
if you change keypad flex and lcd and still same problem...

it can be 2 problems .
software or hardware from main board.
there is a little crystal IC near mainboard flex conector , rehot it with some flux ... if doesnt help , remove it and make jumper like in this pic.
if doesnt help you need to repair pds and full flash.

my problem got fixed with this jupmer 100% .
you can start with soft if you like ....

good luck

thanx man its work 100% with me

bert13 · 11-18-2007, 12:11

bro change the ribbon flex

08-02-2006, 16:34	#1 (permalink)
celluniversal No Life Poster Join Date: Apr 2005 Age: 45 Posts: 1,263 Member: 139388 Status: Offline Thanks Meter: 98	V3 no display,no display light V3 no display, no light(only blank dark display) But keypad light ok Phone also working good (both incoming and outgoing calls) What to do i 1)change ribon OR 2)we have to flash the phone Needed good advice pls

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
After flash moto v3 no display, only keyboard light !	Unlocker_001	Motorola P2k	17	06-28-2009 12:19
help....v3 no display and display light	CHAPRAN	Motorola Hardware Repair	2	01-29-2009 10:57
V3 no display, no light	amanhalwara	Motorola Hardware Repair	0	07-02-2008 10:44
help me pls.... urgent my 6131 no light n display no light	WinD_VteC	Nokia Hardware & Hardware Repair	3	02-18-2008 10:21
2 Motorola V3 after flash no display and keyb light!!!!	midou01	Smart-Clip	18	01-10-2006 17:43

08-02-2006, 20:34	#2 (permalink)
cellectro Freak Poster Join Date: Jul 2004 Location: always trying Age: 52 Posts: 407 Member: 73310 Status: Offline Thanks Meter: 3	check flex toward lcd, if that is ok change lcd,should work

08-02-2006, 22:59	#3 (permalink)
originalgraders Freak Poster Join Date: Aug 2006 Location: FONECODES.CO.UK Posts: 326 Member: 323968 Status: Offline Sonork: 100.114140 Thanks Meter: 24	i think make sure flex is not cracked, i can help u np. pm

08-02-2006, 23:20	#4 (permalink)
ABOUSHADY No Life Poster Join Date: Nov 2005 Location: ABouSHaDy Age: 48 Posts: 1,873 Member: 200717 Status: Offline Sonork: 100.1580056 Thanks Meter: 793	no flex no lcd i can help u np contact [email protected] msn [email protected]

08-03-2006, 00:08	#5 (permalink)
saolinac Insane Poster Join Date: Apr 2003 Location: Beograd Age: 45 Posts: 79 Member: 27463 Status: Offline Thanks Meter: 3	it's little cristal ic by the flat connector on the pcb. REGARDS

08-03-2006, 06:06	#7 (permalink)
hrkgloballinks Freak Poster Join Date: Mar 2005 Posts: 235 Member: 129536 Status: Offline Thanks Meter: 9	most of this problem is from the flex.change the flex it works for me

08-03-2006, 06:59	#10 (permalink)
c_ahmad79 No Life Poster Join Date: Jan 2006 Location: inside emmc ufs Age: 19 Posts: 7,188 Member: 221603 Status: Offline Sonork: 100.1581270 Thanks Meter: 6,395	this is really good soloution........ i will test it soon.........

08-03-2006, 07:47	#11 (permalink)
celluniversal No Life Poster Join Date: Apr 2005 Age: 45 Posts: 1,263 Member: 139388 Status: Offline Thanks Meter: 98	For flashing motorola V3 for display problem in Smart clip an seniour poster gaved the what are the flash files to use in smart clip R374_G_0E.42.07R_A R374_G_0E.42.08R_A R374_G_0E.42.0CR Those files could be used as a solution for the handsets with nonworking internal display after flashing with 9CR version of flash file.) But i dont have smart clip I am having only usb smart But i dont know which files to select to flash Can anyone know which files to select in usb smart for flashing V3 for display problem Needed good advice

11-08-2007, 10:04	#13 (permalink)
malta No Life Poster Join Date: Apr 2003 Location: pakistan Age: 44 Posts: 584 Member: 27289 Status: Offline Thanks Meter: 24	but if that little ic is not in that place and flashed the phone changed the flex and the lcd and still the same problem what will be the solution

11-18-2007, 12:11	#15 (permalink)
bert13 Junior Member Join Date: Mar 2007 Posts: 21 Member: 478257 Status: Offline Thanks Meter: 11	bro change the ribbon flex